AAA World-wide Enterprise

A male plug and female socket set for quick and secure 12V power connection – ideal for electric trolling motors, windlasses, or other high-draw equipment. It provides a stable two-pole connection, resistant to vibration and moisture, while allowing easy plug-in and disconnection when mounting or removing your device.

• Two-pole 12V connector – ensures a solid, safe power link for DC supply
• Quick-release design – enables fast detachment of the motor or device without tools
• Durable housing – made of rugged plastic, suitable for marine conditions (corrosion-resistant)
• High current capacity – handles heavy 12V loads (trolling motors, winches) with a secure locking connection

A standard 12-volt male plug (cigarette lighter style) with a built-in 5A fuse and LED power indicator. Ideal for connecting various 12V accessories to the electrical system of a boat, car, or RV. It features a locking mechanism for a secure fit in the socket, and the LED lights up when power is present – a handy feature in the dark.

• Built-in 5A fuse – protects your device and circuit from overload or short-circuit
• LED indicator – shows when power is on and helps locate the plug in low-light conditions
• Secure locking fit – plug seats firmly and locks into a standard 12V socket, preventing vibration-induced loosening
• Universal compatibility – fits all standard automotive/marine cigarette lighter sockets (Ø21 mm)

Emergency engine cut-off switch with a coiled safety lanyard that instantly kills the outboard motor if the operator falls overboard. Designed for 12V systems, 10A load, this QuickStop switch enhances boat safety by preventing runaway movement in case of an accident.

• Function: immediately cuts engine ignition when the clip is pulled (man overboard scenario)
• Coiled Lanyard: bright orange/red spiral cord attaches to the captain (life jacket or wrist)
• Universal: compatible with most outboards and jet skis – standard key/clip design
• Construction: waterproof kill-switch button, durable plastic body and stainless steel clip; rated 10A @12V
• Importance: a must-have safety device for any powerboat – ensures the engine stops if the operator goes overboard

A waterproof 4-pole electrical connector for deck power. This female plastic coupler has four terminals (max 3A each) and a protective cap, designed for flush mounting on a deck or console panel. It provides a reliable multi-wire connection for low-current devices on the boat, and remains sealed against spray and corrosion when not in use.

• 4 pins, 3A each – supports three conductors plus ground or other complex wiring (e.g. +12V / –12V / signal / ground)
• Weather-proof – tethered cap with gasket keeps water out of the connector (suitable for exterior mounting)
• Durable plastic body – UV-resistant, impact-resistant construction, prevents terminal corrosion
• Easy installation – mounts with nut or bolts; requires matching 4-pin male plug for operation

Heat-shrink insulated fork terminals for secure, marine-grade electrical connections. The fork shape allows quick installation under a screw without full removal, while the adhesive-lined insulation seals out moisture and prevents corrosion.

• Color-coded sizes: Red (0.5–1.5 mm²), Blue (1.5–2.5 mm²), Yellow (4.0–6.0 mm²)
• Heat shrink insulation with adhesive lining creates a waterproof, vibration-resistant seal
• Fork (spade) design allows quick attachment under a screw without completely removing it
• Made of high-conductivity copper with tin plating for corrosion resistance
• Ideal for boat and automotive wiring (12V/24V systems) where secure, sealed connections are critical

Heat-shrink insulated ring terminals for the most secure cable connections. The closed ring design ensures the connector cannot slip off the stud, even under vibration, while the adhesive-lined heat shrink provides a waterproof seal against moisture and corrosion.

• Color-coded sizes: Red (0.5–1.5 mm²), Blue (1.5–2.5 mm²), Yellow (4.0–6.0 mm²)
• Adhesive-lined heat shrink insulation creates a fully waterproof, strain-relieved connection
• Ring design guarantees a secure attachment (must remove bolt to install) that won’t shake loose under vibration
• Made from tin-plated copper – excellent conductivity and long-term corrosion resistance
• Perfect for battery terminals, ground bus connections, and other high-current wiring in marine or automotive systems

10-meter spiral polyethylene cable wrap for bundling and protecting wires. Flexible yet durable, it allows easy insertion or removal of cables at any point while shielding them from abrasion and damage.

• Length: 10 m; available diameters (outer): 7 mm, 13 mm, 16 mm
• Organizes loose wires into a neat bundle and protects them from chafing and wear
• Spiral design allows branching off cables at any point without removing the entire loom
• Made of durable polyethylene – resistant to oils, fuel, and UV (black color is UV-stabilized for sunlight exposure)
• Easy installation – simply wrap around cable groups by hand; can be cut to any length with scissors or a knife

Reinforced double electrical terminal block for heavy-duty use (up to 48V systems). Allows safe interconnection of multiple cables on two separate stud posts (e.g. positive and negative) with exceptional mechanical strength and reliable insulation.

• Twin hefty stud posts (M8 or M10) on a single insulated base – two connection points in one unit
• Rugged glass-fiber reinforced nylon base – resists impact, vibration, and high temperatures
• Handles high current loads in 12V/24V/48V DC systems – ideal for combining cables from batteries, switches, or distribution bus bars
• Available with black or red base for easy identification of negative (ground) vs. positive terminals
• Corrosion-proof hardware (stainless steel studs, nickel-plated nuts) – built for marine and harsh environments

Copper crimp cable lugs for terminating heavy-duty cables. Tin-plated to resist corrosion, they are ideal for battery terminals, ground connections, and other high-current links. Available for cable sizes from 4 mm² up to 95 mm².

• High-purity copper with tin plating – excellent conductivity and no corrosion or oxidation
• Cable cross-section sizes: 4, 6, 10, 16, 25, 35, 50, 70, 95 mm² (covers a wide range of cable gauges)
• Bolt hole diameters from M5 to M12 (depending on lug size) – fits standard battery posts, studs and bus bars
• Crimp-on installation (requires crimping tool) – provides a strong, low-resistance bond between wire and lug
• Use cases: terminating battery cables, starter motor leads, main ground straps, solar & inverter wiring, and other high-current connections

Enhance your boat's electrical system with this 6-gang waterproof switch panel, featuring durable rubber covers for each switch, ensuring protection against water ingress and reliable performance in marine environments.