EVAL

A folding emergency ladder for boats, designed for quick deployment in man-overboard situations. It mounts permanently on a railing in a waterproof storage bag. Easy to use even by a person in the water – an essential safety accessory:

• Available in two versions – 3 or 4 steps (length ~94 cm or ~114 cm)
• Compact UV-resistant storage bag protects the ladder and allows permanent rail mounting
• Rapid deployment in emergencies – can be pulled out easily by someone in the water thanks to a built-in grab handle
• Ideal for solo sailors and small crews – enables self-rescue without outside assistance

A round oar stop collar with an inner diameter of Ø35 mm and a length of 85.7 mm, made of grey PVC plastic. This collar prevents the oar from sliding too far through the oarlock while rowing, by fixing the oar’s position. It installs easily on the oar shaft and ensures more efficient and safe rowing.

• Size: Inner diameter 35 mm (for oars Ø35 mm), collar length ~85.7 mm – provides a broad contact area for support
• Material: Durable PVC (light grey) – impact-resistant, UV-stable, and saltwater-proof; lightweight and non-corroding
• Function: Acts as a stopper – keeps the oar at the optimal position in the oarlock so it doesn’t slide out or in too far
• Installation: Slides onto the oar shaft; can be secured with a small screw or adhesive to prevent slipping
• Application: Suitable for boat, dinghy, and canoe oars around 35 mm diameter – an ideal spare accessory if original oar stop rings are lost or worn

Waterproof inline fuse holders with pre-attached 260mm leads for blade-type fuses. Available in two versions: one for standard ATO fuses (up to 30A) and a smaller one for mini blade fuses (up to 30A). Both feature sealed caps and durable cables, ideal for marine and automotive use.

Automatic float switch for 12V bilge pumps (supports up to 10A load), featuring a protective cover. Reliably triggers your pump when water rises and stops it when water recedes, while the cover shields the mechanism from debris for trouble-free operation.

• For 12V systems: Designed for 12V pumps (up to 10A) – ideal for small to mid-sized boats.
• Automatic operation: Float monitors water level and turns pump on/off with no manual intervention.
• Protective housing: Cover shields the float mechanism from debris, preventing jams or damage.
• Easy installation: Standard design with mounting holes – quick to install and wire in-line with your pump.

A compact bath/swim platform made of stainless steel with an integrated folding ladder (3 steps). Built from polished AISI316 stainless tube with a wooden top for durability and style. Ideal for small powerboats – adds a convenient swimming platform:

• Frame constructed from mirror-polished stainless tubing Ø22 mm (marine-grade AISI316 steel)
• Platform surface 27×21 cm with teak wood inserts for a non-slip footing and elegant look
• Built-in folding ladder with 3 steps for easy water access (stows beneath the platform)
• Perfect for transom mounting – makes re-boarding after swimming, diving, or watersports much easier

Rugged waterproof brass toggle switch with 3‑position On‑Off‑On, rated 15 A/12–24 V DC for marine applications.

Enhance your boat’s electrical reliability with this heavy‑duty waterproof toggle switch (code 01390). Made from chrome-plated brass, it features a secure panel-mount with ½″ threaded bushing, providing a firm toggle action in rough sea conditions. Rated at 125 VAC–15 A, 250 VAC–10 A, 12 V DC–15 A, and 24 V DC–10 A, it comfortably handles lighting, pumps, trim tabs, horn, and auxiliary systems. The 3-position On‑Off‑On configuration simplifies dual-circuit control. Sealed design resists salt spray and moisture—ideal for helm panels and exposed environments. Easy to install with two screw terminals. A coastal-grade switch built to last.

A chromed brass rowlock with base designed for secure and durable attachment of an oar to your boat. Ideal for small rowing and inflatable boats, this set provides a reliable pivot point for rowing:

• Material: Made of brass with a chrome-plated finish for maximum corrosion resistance in marine environments.
• Base Socket: Includes a brass base socket (52 mm depth) with two mounting holes for easy installation on the gunwale.
• Standard Size: 12 mm pin diameter – compatible with most boat oars and sockets.
• Reliability: Rugged construction withstands heavy rowing and is a superior alternative to plastic rowlocks that can break easily.
• Application: Perfect for wooden dinghies, fishing boats, and inflatables (2–4 m length) where a stable oar lock is required.

Angled drain fitting for boat showers or deck drains, made from tough nylon with a stainless steel grate. Fits 38 mm (1½") hose for effective water removal from cabin showers, wet decks, or other drainage areas, combining a corrosion-proof body with an elegant metal cover.

• 90-degree shower drain scupper designed for marine bathrooms and wet deck areas.
• Nylon body and elbow are lightweight and immune to corrosion, ideal for long-term use in damp environments.
• Polished stainless steel grate on top provides durability and a sleek finish, matching other fixtures.
• Accepts standard 38 mm (1½") drainage hose, allowing ample flow to quickly remove water.
• Easy to install in the floor of a shower or cockpit; the grate prevents debris (hair, dirt) from clogging the drain and can be removed for cleaning.

A : 38 mm

B : 75 mm

C : 63 mm

D : 90 mm

A waterproof inline fuse holder for glass tube fuses (6.3x32mm or 6.3x30mm) with sealed housing and wire leads. Fits cables 0.75–1.50 mm² and supports up to 30A. Ideal for protecting circuits in marine environments – keeps the glass fuse dry and secure with an easy screw-cap design.

Premium 90-degree drain fitting made entirely of AISI 316 stainless steel, including both the body and grate. Suits 38 mm (1½") hose connections, offering ultimate corrosion resistance and durability for deck or shower drains on high-end boats and yachts.

• All components (flange, grate, and elbow) are made of polished 316 stainless steel for maximum longevity in saltwater.
• 90° angled design with integrated hose barb (38 mm) ensures efficient water drainage and easy hose routing.
• Heavy-duty construction stands up to heavy use and foot traffic; ideal for luxury vessels or commercial craft demanding reliability.
• Large drain opening with stainless strainer allows high-volume water flow while blocking debris.
• Top-of-the-line drainage solution for exposed deck areas, cockpit scuppers, or shower drains where only the best materials will do.

A : 38 mm

B : 76.3 mm

C : 44.5 mm

D : 70 mm

E : 13 mm