Osculati

A durable PVC cap designed to shield shore power plugs (30A) from water, dirt, and UV exposure when not in use. It features a quick-twist locking ring made of UV-resistant Luran that creates a watertight seal. This cap keeps your plug’s contacts dry and clean, thereby extending the life and safety of your electrical equipment.

• Waterproof Seal: Provides up to IP67-level protection for your plug – preventing water ingress during heavy rain, crashing waves, or deck wash-downs.
• Robust Construction: Made of flexible, heavy-duty PVC in a bright blue color, UV-stabilized and saltwater-resistant; it won’t crack or degrade with prolonged sun exposure.
• Locking Mechanism: Built-in quick-rotation ring (crafted from UV-resistant Luran) allows easy and secure fastening of the cap onto the plug. An additional adapter ring is included to fit the threads of standard MARINCO deck inlets for a tight coupling.
• Easy to Use: Installs and removes in seconds – simply slip the cap over the plug and twist until it locks. It keeps the plug protected when your cable is unplugged, preventing corrosion of the metal pins and entry of debris.

Flush‑mount marine battery switch (OFF‑1‑2‑PARALLEL) rated 300 A continuous / 450 A peak. Flame-resistant PC/PTB casing, copper contacts, stainless spring, ISO‑certified.

A versatile 30A (220V) marine shore power plug made of durable polycarbonate with silver-plated brass contacts. It features a secure cable locking system for firm attachment and carries an IP56 rating, making it safe to use in wet conditions. This plug provides reliable power to medium-sized boats and yachts.

• Standard Amperage: Rated 30A at 220V – ideal for mid-sized sailboats and motorboats. Supports powering typical onboard appliances, air conditioning, water heaters, and chargers simultaneously, covering the needs of a standard yacht.
• Premium Materials: Tough polycarbonate housing that resists impact and UV degradation for long service life; the contact pins are silver-plated brass, ensuring superior conductivity and protecting against rust and oxidation.
• Marine Waterproofing: IP56 rating – the plug is protected against powerful water jets, heavy rain, and seaspray. It can be used on an open deck without risk of short-circuiting when splashed (not intended for full submersion).
• Cable Lock System: An integrated cable clamp secures the incoming shore cable firmly to the plug. This prevents the connection from pulling out or wobbling under tension and relieves strain on the electrical terminals.

Flush-mount MKIII battery switch with OFF–1–Parallel positions, 300 A continuous / 450 A peak. Copper contacts, stainless springs, flame-resistant PC/PTB housing, ISO‑8846 certified.

Compact marine-grade ON/OFF battery switch rated 300 A continuous / 450 A intermittent / 1000 A start (5 sec). Side cable exits, wall or panel mount, ISO‑compliant.

Heavy-duty marine battery switch rated 290 A continuous / 2,500 A peak (5 s), with splash-proof removable key and polycarbonate body. Flange-mountable, CE-approved.

A rugged 30A (220V) waterproof deck socket for shore power, made from white ABS plastic (Luran) with an IPX7 protection rating. It features a spring-loaded self-closing cover that shields the inlet terminals from water when no plug is connected. This socket is mounted on the boat and allows safe connection of a 30A shore power plug from the dock to the vessel’s electrical system.

• Deck Inlet: A round, watertight connector for installation on the boat’s deck or hull. It serves as the female receptacle (with male pins) on the vessel, into which the shore power cable plugs.
• Marine-Grade Materials: The housing is crafted from high-strength ABS (Luran) plastic, which resists UV rays and weathering – ensuring long life without cracking or yellowing. The internal contact pins are silver-plated brass, protected against corrosion for stable electrical conductivity.
• Fully Waterproof: The IPX7 rating means the unit withstands full immersion in water (up to 1 meter for 30 minutes). The cap closes tightly with a snap latch and rubber gasket, keeping water and moisture away from the electrical prongs when the inlet is not in use.
• Easy Installation: Designed to fit standard cutouts for 30A inlets. It comes with a base gasket and stainless steel mounting hardware. The backside has a protective cover over the wire connections, guarding the wiring from strain and moisture entry.

A 30A deck inlet made of premium AISI 316 stainless steel, combining a sleek appearance with maximum IPX7 protection. The mirror-polished, spring-closing cap keeps water out of the connection even under heavy seas. This stainless inlet is ideal for luxury yachts and marine vessels where reliability, strength, and corrosion resistance are paramount.

• Stainless Steel Build: Body and cap crafted from marine-grade 316 stainless steel with a mirror finish. Highly resistant to corrosion in saltwater and extremely durable – retains its shine and structural integrity for years.
• High Waterproof Rating: IPX7 – fully waterproof against immersion. Precision rubber gaskets and the cap’s locking latch ensure no water penetrates inside when the lid is closed.
• 30A Capacity: Designed for 30A/220V shore power, with heavy-duty electrical pins (nickel/silver-plated) for reliable transfer of high currents without overheating. Conforms to standard dimensions to mate with corresponding 30A shore power plugs.
• Secure Installation: Mounts firmly to the deck; supplied with stainless steel hardware. Includes a rear plastic cover over the wire terminals to shield them from moisture and relieve strain on the cable.

A low-profile 30A deck inlet from the “New Edge” series, made of white ABS plastic, designed for modern boats. It offers IP56 protection against splashes and rain, and features a sleek flat cover with snap closure. This socket is compatible with both standard 30A plugs and 16A Marinco/Hubbell plugs, making it a versatile solution for various shore power systems.

• Sleek Design: The “New Edge” style is characterized by a low profile and elegant look. The white plastic flange sits flush on the deck with no protruding parts, reducing the risk of snagging lines or tripping.
• Universal Compatibility: The special construction allows the inlet to accept a 30A plug, and thanks to its adaptive opening – also a standard 16A (European/Marinco) plug. This means the boat can connect to a 16A supply with an appropriate cable without needing a separate inlet.
• IP56 Protection: The socket withstands strong water spray and seasplash. The snap-shut lid and internal gasket keep the electrical components dry during rainy weather or waves on deck (not fully submersible, but more than sufficient for above-water conditions).
• Easy Installation & Service: Installs quickly with the included screws; its dimensions match standard 30A cutouts. The inner module can be removed for access to the terminals, simplifying the wiring process. A built-in strain relief at the back secures the wires and prevents chafing or pull-out.