Electrical Equipment

Waterproof deck socket for permanent installation, available in 2-pin (two-conductor) or 3-pin (three-conductor) versions. Intended for 12V systems (also 24V compatible), this connector allows safe connection of external devices – such as portable lights, deck searchlights, or transducers – with easy plug-in/plug-out capability. The metal pins support up to 3A (for 3-pin) or 5A (for the heavy-duty 2-pin version), covering the needs of small electrical loads on board. The connector features a cap and seals that ensure no water ingress when closed. It mounts flush on the deck or panel (round base ~40mm) and is secured from behind with locking nuts.

• 2-Pin (5A) or 3-Pin (3A): Choose the version based on number of conductors and current required
• Deck Mount: Round body embedded in deck/panel – only the cap is visible externally
• Waterproof: IPX6+ rated with cap closed – no water entry into the connector
• Rugged Build: Contacts made of brass with anti-corrosion plating, housing of nickel-plated brass or durable plastic (depending on model)
• Secure Connection: When paired with the matching male plug (sold separately), it provides a stable, vibration-resistant link

The Pro Charge Ultra Lite is a high-performance 30A battery charger delivering fast and precise charging for your onboard batteries. With over 90% efficiency and a universal 80-270VAC input, this charger can be used worldwide – perfect for global cruising or RV travel. It supports 8 pre-programmed charging modes for different battery types (AGM, Gel, Flooded Lead Acid, Calcium, LiFePO4, etc.) and features a special night mode for quiet operation. Compact, lightweight, and reliable – it keeps your electrical system charged up and your batteries healthy.

• Wide AC Input: Operates from 80 to 270V AC (40-70Hz) – handles any global voltage without the need for a separate transformer, great for travel and generator power.
• Multi-Stage Charging: 8 charging profiles covering all common 12V battery types, including lithium (LiFePO4) – ensures the optimal charge algorithm for maximum battery life and performance.
• High Efficiency: >90% efficiency – very little energy wasted as heat. This means faster charging even under lower input voltages and less strain on your power source.
• Dual Outputs: Charges two separate battery banks at once (e.g., engine and house batteries), automatically distributing charge as each bank needs.
• Quiet Night Mode: Built-in half-power mode that reduces output (and fan noise) during a set period – enjoy quiet nights aboard without the hum of a running charger.

A standard 12-volt male plug (cigarette lighter style) with a built-in 5A fuse and LED power indicator. Ideal for connecting various 12V accessories to the electrical system of a boat, car, or RV. It features a locking mechanism for a secure fit in the socket, and the LED lights up when power is present – a handy feature in the dark.

• Built-in 5A fuse – protects your device and circuit from overload or short-circuit
• LED indicator – shows when power is on and helps locate the plug in low-light conditions
• Secure locking fit – plug seats firmly and locks into a standard 12V socket, preventing vibration-induced loosening
• Universal compatibility – fits all standard automotive/marine cigarette lighter sockets (Ø21 mm)

A robust plastic battery box available in two sizes to fit different capacity batteries (up to 70Ah and up to 120Ah). Ideal for marine use with its acid-proof construction and secure battery hold-down strap. Protects the battery from water, impacts, and spills, ensuring long-term safety.

• Reinforced body – made of polypropylene, resistant to battery acid and shocks.
• Complete with strap – includes a strap and stainless screws to firmly secure the battery.
• 4 cable ports – built-in openings (Ø 14 mm) for easy routing of cables without pinching.
• Ergonomic handles – large handles with smooth edges for comfortable lifting and carrying.
• Meets standards – compliant with ABYC E-10 and USCG 183.420 specifications for safe onboard battery storage.

High-quality stainless steel push button with a built-in blue LED indicator, suitable for marine and automotive use. This 19mm switch is waterproof and durable, perfect as a starter, horn, or light switch:

• 19mm diameter bezel made of 304 stainless steel – corrosion-resistant and rugged for harsh environments
• Integrated blue LED ring for clear on/off status indication (excellent visibility at night)
• Rated 10A (12V or 24V DC), capable of directly handling most device loads
• Available in latching ON/OFF or momentary (spring-return) versions – choose depending on application (toggle power or momentary control)
• IP65 front seal – resists water splashes; includes pre-wired pigtails (~20cm) for easy hookup to the 4 terminals (2 switch contacts, 2 LED leads

An 8-switch marine panel designed for larger boats with more electrical devices. It provides centralized control for up to eight circuits and features integrated protection via automatic breakers. The weather-resistant construction and LED backlighting on each switch make this panel reliable and user-friendly in all conditions.

• Eight water-resistant rocker switches with bright LED indicators to show when each circuit is on
• Built-in automatic breakers for each circuit (4 x 5A, 2 x 10A, 2 x 15A), providing dependable protection without fuses
• Common negative bus bar for quick grounding connections and simplified wiring of multiple devices
• Durable black ABS plastic faceplate that won’t corrode, withstanding UV exposure and constant vibration
• Universal compatibility with 12V and 24V systems – perfect for yachts and larger boats with numerous onboard electronics

A telescoping all-round light that extends to provide 360° white anchor light when needed and retracts completely flush when not in use. Ideal for sail and power boats up to 12 m, it doubles as a flag pole for added utility:

• 54 cm telescopic pole – raises the light to 54 cm height for excellent visibility above structures and crew. When not needed, the pole collapses/folds down into the base, hiding nearly entirely out of sight and leaving the deck obstruction-free.
• Flush-mount base – a special recessed socket installs on a flat surface (e.g., stern deck). With the pole retracted, the base sits almost flush with the deck, preventing snagging of lines or interference with boat covers. A cap for the socket is provided to keep water out when the light is removed.
• Flag holder rings on the pole – the pole is equipped with eyelets for attaching a flag. This gives it dual purpose – by day the pole can fly an ensign or club flag, and by night it becomes the anchor light (when extended).
• 12V/10W white lamp – casts a bright 360° white light, visible at least 1 NM, meeting the requirements for boats up to 12 m. The standard incandescent bulb (included) makes for easy replacement and reliable operation.
• Marine-grade materials: An anodized aluminum pole (Ø19 mm) and durable plastic base are built to resist corrosion. The mechanism withstands repeated extension/retraction and locks firmly in the upright position for stability in use.
• Recommended use: For runabouts, yachts, and fishing boats ~5–12 m whose owners want a practical “2-in-1” solution – a navigation light and flag staff. Especially useful for trailerable boats or those with covers – when stowed, the light is protected from damage and out of the way.

A combined tri-color masthead light designed for sailing vessels. It integrates red, green, and white sectors into one unit, simplifying a sailboat’s lighting and conserving power:

• 3-in-1 navigation light – combines port red, starboard green, and stern white sectors in a single lamp. It covers the full horizon (360°) with the correct angles: 112.5° to port (red), 112.5° to starboard (green), and 135° aft (white). Ideal for sailboats sailing at night under sail.
• Single 12V/10W bulb powers all three colors – a simplified system with one light source, which reduces power consumption (one 10W instead of three separate bulbs) and eases maintenance (only one bulb to replace). A standard dual-contact bulb is included, providing the required brightness for boats <12 m.
• Compact 24 cm height – the entire lamp is housed in one cylindrical assembly (~24 cm) that mounts at the masthead or on a bracket. The small size and black housing minimize windage and weight at the top of the mast.
• Easy mast-top installation: Designed to attach to a flat surface at the masthead or a dedicated bracket. Two wires connect the lamp to the boat’s electrical system (common positive for all three colors and negative), simplifying wiring compared to separate fixtures. Mounting hardware and a rubber gasket are provided for a secure, waterproof fit.
• Battery-saving efficiency: The tri-color light reduces battery load – you use one bulb for all three navigation colors while sailing at night. This extends your battery life, crucial for long passages under sail.
• Regulation compliant: Intended for sailboats up to 12 m, the sector visibility is ~1 NM (red/green) and ~2 NM (white) as per standards. (Note: to be used under sail only; when motoring, a separate 225° steaming light and different light configuration are required.)

A high-quality marine inverter with pure sine wave output, available in 600W and 1000W models, designed to power sensitive onboard appliances with grid-quality electricity. This inverter converts your 12V battery into stable 230V AC, allowing you to run devices like laptops, TVs, microwaves, or chargers on your boat just as you would at home. It features dual AC outlets (European Schuko and UK) and an integrated RCD (ground fault circuit breaker) for maximum safety. With a rugged design and configurable grounding, it’s perfectly suited for marine environments.

• True Sine Wave: Delivers a clean sine wave output – safe for all types of equipment, including sensitive electronics, with no risk of interference or damage that modified wave inverters might cause.
• Two Models: 600W (for smaller loads) and 1000W (for heavier appliances) – choose based on your power needs. Both models offer high surge capacity to handle start-up currents of devices.
• Dual Outlets & RCD: Equipped with both a Euro Schuko and a UK-style AC outlet, capable of 230V (and 110V if required). Built-in RCD (residual current device) adds safety by preventing electric shocks, especially important in damp marine conditions.
• Marine-Ready Design: Provides option for neutral-ground bonding or floating ground (selectable) to integrate properly with yacht electrical systems. Gold-plated terminals and high-quality components ensure minimal loss and reliable operation.
• Quiet Cooling: Features an upgraded large cooling fan that runs efficiently at lower RPM – meaning quieter operation even under load.