Electrical Equipment

Insulated straight butt splice connectors for securely joining two wires end-to-end. After crimping and heating, these heat shrink connectors form a water- and vibration-resistant seal that protects the electrical connection from corrosion and disconnection. Suitable for emergency repairs of broken wires as well as permanent extensions or splices in the wiring of boats, vehicles, and industrial equipment.

• Secure Splicing: Insert two stripped wire ends from opposite sides – crimp – and you get a strong continuous connection
• Hermetic Seal: Heat-shrink tubing with meltable inner adhesive shrinks and encapsulates the splice, providing 100% moisture protection
• Standard Sizes: Red (for 0.5–1.5 mm²), Blue (1.5–2.5 mm²), Yellow (4–6 mm²) – cover typical wire gauges in marine and auto systems
• Tension Resistant: Once properly crimped and shrunk, the butt splices withstand pulling force and won’t let wires slip out under strain
• Professional Grade: Tinned copper barrels with high-quality polymer sleeves – meet marine standards for electrical connections

This compact 5A portable charger is perfect for maintaining and charging 12-volt batteries in boats, cars, motorcycles, or RVs. It’s compatible with all types of lead-acid batteries – wet/flooded, AGM, GEL, calcium – and automatically applies a 3-stage charge (Bulk, Absorption, Float) to maximize battery life. It features three operating modes and smart functions: a soft start for deeply discharged batteries, a half-power mode for small batteries (<30Ah), as well as battery condition diagnostics. The universal input (100-240V AC) allows you to use it anywhere in the world. The charger is rated IP45 (protected against dust and splashing water) and has LED indicators plus touch-control buttons for easy operation.

• Universal Use: Suitable for lead-acid batteries including flooded, AGM, GEL, VRLA, and calcium types from about 10Ah up to ~120Ah. Ideal for boat batteries, car batteries, ATVs, solar systems, and more.
• Automatic Smart Charging: 3-stage charging with maintenance mode – the charger monitors the battery and stops when fully charged, and can be left connected indefinitely to float without overcharging.
• Special Modes: Half-power (50%) setting for small capacities – reduces current to safely charge motorcycle and small batteries. Soft Start – if a battery is heavily discharged, it begins with a low current until voltage rises to a safe level. Desulfation pulse – detects sulfated batteries and attempts to revive them with a pulsing charge.
• Safe and Protected: IP45-rated enclosure, resistant to dust and light water splashes. Built-in protections against reverse polarity, short circuit, and overheating. Certified to EN60335 & EN55014 standards for electrical safety and EMC.
• Easy to Use: Three illuminated indicators show charging status (Charging, Full, Maintenance). One-touch mode selection (Normal / Small Battery / Supply mode). Compact size (150×60×30 mm) and weight only ~0.4 kg – convenient to carry and store.

4-switch marine panel with LED illumination, engineered for harsh sea conditions. Made from high-quality materials for durability, featuring easy installation and energy-efficient design. Built-in rear fuses and a gasket seal ensure safe, long-lasting operation on your boat.

A premium 360° anchor/masthead light featuring LED technology and an all-stainless construction. Certified by RINA for vessels up to 50 m, it delivers top-tier reliability, visibility, and longevity for the most demanding mariners:

• Brilliant 360° LED illumination – purpose-built for anchoring and navigation, the LED source provides exceptionally bright white light (visible over 2 NM), meeting regulations even for larger vessels.
• AISI 316 stainless steel build – the housing and base are polished marine-grade stainless steel, impervious to saltwater and impact. The classic design with an inox base gives a luxury appearance and withstands decades of use without corrosion.
• RINA type-approved – the light is type-tested and approved by RINA (Italian Naval Register) for boats up to 50 m length. This attests to its quality and compliance with international standards (COLREG) for all-round anchor lights.
• Dual-voltage (12/24V) LED bulb included – operates on both 12V and 24V systems, drawing only ~1.7W. Ultra-low power consumption protects your batteries, and the LED module has an extremely long service life (tens of thousands of hours).
• Waterproof and shock-resistant – a sealed construction (IP66/68) prevents water ingress, and the tough polycarbonate lens/dome is UV-resistant and impact-proof. The light is built to withstand harsh weather and vibration at sea.
• For large yachts and ships: Suitable for mast or arch mounting on yachts, catamarans, and small ships up to 50 m. Provides captains with peace of mind that their vessel is visible and compliant, even under professional or heavy-duty conditions.

High-quality female fork type (Ω-shaped) wire terminals with heat shrink insulation, designed for secure attachment of wires under screw clamps and bolts. These connectors combine the convenience of a U-shaped design (allowing attachment to a terminal post without completely removing the nut) with the protection of a waterproof heat-shrink covering. Color-coded by wire size, they provide a corrosion-resistant, vibration-proof contact – ideal for marine and automotive electrical systems.

• U-Shaped Design: Fork shape for quick connection to screw terminals – slips under a nut without fully removing it
• Heat Shrink Insulator: Upon heating, the insulation fully encapsulates the metal lug and wire, shielding the connection from water, salt, and oils
• Standard Sizes: Red (0.5–1.5 mm²), Blue (1.5–2.5 mm²), Yellow (4–6 mm²) – cover a range from fine wires to heavier gauge power conductors
• Secure Grip: Flat fork end provides a large contact area under the washer – handles heat and high currents without coming loose
• Marine-Grade Durability: Made of tinned copper and high-strength polymer, these terminals withstand salt spray, vibrations, and temperature swings in yachts, boats, cars

5-switch marine panel (Wave design) with an added 12V lighter-style socket. Black plastic body (IP54), waterproof switches with LED backlights, and built-in thermal breakers for each of the 5 circuits. Includes function labels for easy identification, providing convenient control of devices plus an extra onboard power outlet.

Heat-shrink insulated fork terminals for secure, marine-grade electrical connections. The fork shape allows quick installation under a screw without full removal, while the adhesive-lined insulation seals out moisture and prevents corrosion.

• Color-coded sizes: Red (0.5–1.5 mm²), Blue (1.5–2.5 mm²), Yellow (4.0–6.0 mm²)
• Heat shrink insulation with adhesive lining creates a waterproof, vibration-resistant seal
• Fork (spade) design allows quick attachment under a screw without completely removing it
• Made of high-conductivity copper with tin plating for corrosion resistance
• Ideal for boat and automotive wiring (12V/24V systems) where secure, sealed connections are critical

A powerful marine battery charger with IP68 waterproof rating, engineered for reliable onboard charging. Its compact design and smart multi-stage charging ensure fast, safe battery maintenance even in harsh conditions:

• Fully Waterproof IP68: Sealed to withstand marine environments – perfect for bilge or deck installation exposed to spray and salt.
• Multi-Output Smart Charger: PS125 model (5A @12V) for single-bank charging; PS1255 model (dual output 2x5A @12V or 10A total, and 5A @24V) for two battery banks or 24V systems.
• LED Indicators: Built-in LEDs display power and charging status. Intelligent thermal control prevents overheating for long-term reliability.
• Easy Installation: Pre-wired fuses and 1.5m cables included for quick setup. Rugged ABS housing resists shock, vibration, and UV exposure.
• Adaptive Smart Charging: Multi-stage charging algorithm optimizes battery health and charge speed, compatible with AGM, GEL, and Lead Acid batteries.

Large 8-switch marine panel featuring a wave design. Made of black plastic (IP54) with 8 waterproof rocker switches, each with an LED indicator and built-in thermal breaker. Includes a set of labels to mark each function – perfect for central control of lights, pumps, and other onboard systems.