Water System and Pumps

High-end white sanitary hose by Osculati, designed for marine WC systems, pumps, and sinks. Made of special anti-odor PVC material with an internal steel spiral, this hose combines flexibility with exceptional robustness. Kink-resistant and operable across a wide temperature range (-15°C to +60°C), it comes in Ø20, Ø25, Ø38, and Ø40 mm sizes for various onboard applications.

• Odor-Shield: White PVC hose with low odor permeability – keeps boat interiors smelling fresh
• Steel Reinforced: Internal steel spiral provides extra strength, high pressure tolerance (up to 5 bar) and vacuum resistance for pumping
• Flexible Yet Tough: Bends easily during installation without collapsing or kinking, thanks to the spiral; stands up to abrasion and repeated flexing
• Premium Quality: Built for long-term marine use – ideal for toilet waste lines, pump suction hoses, and sink drain connections

The Keji deck shower from the Elissa series combines a stainless steel housing and hot/cold mixer with a large shower head for broad coverage. This model offers the same high-quality housing and mixer as the Tiger version, but features a chromed plastic Keji head that provides a wider spray pattern and a cost-effective solution for your boat.

• Sturdy AISI 316 stainless steel housing with a luxury finish
• Built-in mixer for hot and cold water (smooth cylindrical knob control)
• Oversized Keji shower head (chromed plastic) for a wide, gentle spray
• 2.5 m reinforced PVC hose (4 m and stainless hose options available) for convenient use
• Soft-close lid with anti-vibration design – no rattling when the boat is in motion

Automatic float switch for 12V bilge pumps (supports up to 10A load), featuring a protective cover. Reliably triggers your pump when water rises and stops it when water recedes, while the cover shields the mechanism from debris for trouble-free operation.

• For 12V systems: Designed for 12V pumps (up to 10A) – ideal for small to mid-sized boats.
• Automatic operation: Float monitors water level and turns pump on/off with no manual intervention.
• Protective housing: Cover shields the float mechanism from debris, preventing jams or damage.
• Easy installation: Standard design with mounting holes – quick to install and wire in-line with your pump.

Premium AISI 316 stainless steel thru-hull fittings featuring an integrated hose barb (tailpiece) for direct hose connection. Available in common hose sizes 3/8", 1/2", 3/4", and 1", these thru-hulls allow you to run a hose straight to the fitting without needing a separate adapter. Each fitting has a wide flange for the hull exterior and a barb on the interior side to securely clamp your hose. They are ideal for above-waterline drains (scuppers, sink drains, livewell overflow) or any application where a hose needs to pass through a bulkhead or hull with a secure, leak-free connection. Manufactured from marine-grade 316 stainless, they offer superior strength and corrosion resistance compared to plastic fittings.

• Material: AISI 316 stainless steel, one-piece body with barb – rustproof and strong
• Hose Sizes: Comes in 3/8", 1/2", 3/4", 1" barb diameters to fit standard hoses
• Design: Mushroom head outer flange and ribbed hose tail interior for hose clamping
• Application: Direct hose connections for bilge pump discharge, sink or shower drains, livewell/baitwell connections, fuel tank vents (check size), etc.

Oval-shaped drain plug with a stainless steel base that ensures reliable bilge water drainage and a watertight seal when closed. Ideal for transom installation – keeps water out when plugged and allows quick draining when needed.

• High-grade stainless steel construction for excellent corrosion resistance
• Oval low-profile flange (64 x 31 mm) sits flush for a tight, leak-proof fit
• Screw-in plug with rubber O-ring provides a secure, watertight closure
• Perfect for small to medium boats (~3–5 m) that require manual bilge draining
• Easy to use – unscrew the plug to quickly release water after hauling the boat

A compact Tiger deck shower in stainless steel (Elissa series) for cold or pre-mixed water. This model has no built-in mixer – intended for connection to a single water line – and offers a premium stainless steel housing in a small size, perfect for boats with limited space that demand strength and reliability.

• Polished AISI 316 stainless steel housing and lid – maximum corrosion resistance
• Tiger stainless steel shower head with focused spray and anti-vibration washer
• Compact external dimensions 118×97 mm, great for tight spaces (cutout ~90×70 mm)
• 2.5 m reinforced PVC hose for rinsing (options: 4 m or stainless braided hose)
• No integrated mixer – simple hookup to a cold water line or existing mixed supply

Universal automatic float switch for bilge pumps, compatible with 12V, 24V, and 32V systems (supports up to 14A). This heavy-duty float enables automatic control of higher-power pumps, ensuring reliable operation even on larger boats and yachts.

• Multi-voltage: Operates on 12V, 24V, or 32V – a flexible choice for various vessels.
• High amperage: Handles up to 14A current – suitable for higher-capacity pumps with strong output.
• Rugged build: Heavy-duty design with water-resistant housing and a reliable mechanism for long service life.
• Auto protection: Activates your pump as water rises and shuts it off as it recedes – prevents flooding without human intervention.

Ensure efficient bilge drainage and protect your boat’s hull with this premium drain plug and base made from AISI 316 stainless steel. Designed for harsh marine conditions, it provides reliable performance and long-lasting durability.

• Material: Marine-grade AISI 316 stainless steel for superior corrosion resistance
• Dimensions: Plug diameter Ø24 mm; base flange diameter Ø54 mm
• Design: Sturdy oval shape with a secure rubber O-ring seal to prevent leaks
• Application: Installs on the transom or hull bottom to easily drain bilge water
• Installation: Fits standard drain hole; includes base flange and threaded plug for quick removal

Automatic bilge pump float switch with an elongated slim profile (130 x 44 x 54 mm). Designed for installations in tight spaces, it reliably switches your pump on when water is present and off when it’s drained. An ideal solution for bilges with low clearance or crowded equipment.

• Slim profile: Only 44 mm wide – fits into narrow or shallow bilges where standard floats can’t.
• Automatic control: Monitors water level and operates the pump, protecting your boat from flooding without manual switching.
• Durability: Marine-grade plastic housing and a dependable mechanism that works in fresh or saltwater.
• Universal: Compatible with most 12V/24V bilge pumps (standard amp rating) – suitable for a wide range of boats and yachts.