Water System and Pumps

Enjoy a warm shower anywhere with this 20L solar camping shower bag – a flexible water reservoir heated by the sun. Perfect for camping, beach, or boating, this portable shower provides comfort and convenience on the go.

• 20-liter capacity – holds enough water for a few quick outdoor showers
• Solar-heated design – warms water using sunlight, no electricity needed
• Durable PVC construction – tough, non-toxic material safe for water storage
• Shower head with hose (80 cm) – integrated hanging handle and nozzle for easy use
• Lightweight & foldable – packs down small, ideal for travel, camping, or hiking

A full-sized electric marine toilet by TMC (Taiwan) with built-in macerator. It offers at-home comfort with powerful automatic flushing – available in 12V or 24V versions to suit your power system:

• Comfort Height: Large porcelain bowl with standard household seat height (~48 cm/19″) and a comfortable seat – brings a home-like toilet experience to your boat.
• Powerful Macerator: Electric pump with blades shreds waste and quickly evacuates ~20 L/min, preventing clogs and ensuring efficient waste removal.
• Dual Voltage: Comes in two models – 12V (~20A draw) or 24V (~10A draw) – to match your boat’s electrical setup with no need for converters.
• Rugged Build: Heavy-duty 23 kg construction with a sturdy ceramic bowl, corrosion-resistant hardware, and gaskets meeting ISO 8099 marine waste standards.
• Quiet Water Valve: Low-noise flushing system with internal anti-siphon valve – minimizes sound during filling and discharge, suitable for any area on your yacht.

Oval plastic drain plug with flange base for fixed installation on a boat. Features a 25 mm inner drain diameter and comes in two body length options – short (~27 mm) and long (~67 mm) – to fit different transom or hull thicknesses. A separate spare inner plug (male insert) is included for replacement in case of loss or wear. Made of white ABS material for a watertight seal and durability. Ideal for transom drain points – allows quick draining by removing the plug.

• Oval base with screw holes – easy to mount on transom/deck; low-profile flange sits flush against the hull
• 25 mm inner diameter – standard drain size (can attach to 25 mm hose if needed for draining)
• Two length options: ~27 mm (for thin walls) and ~67 mm (for thick walls) – choose according to your boat’s hull/transom thickness
• Spare plug (code 00923-2) – an additional inner “stopper” insert for replacement; prevents downtime if the original plug is lost
• Secure seal – equipped with a rubber O-ring for watertight closure; ABS plastic is UV-resistant and impact-resistant

A reliable universal bilge pump panel compatible with all 12/24V systems. Equipped with a three-function toggle (Auto/Off/Manual) and dual LED indicators, this panel provides easy bilge pump control and protection via a built-in fuse.

• Suitable for all types of bilge pumps with float switch or electronic sensor
• 3 operating modes: Automatic (via float switch), Off, Manual (manual override pumping)
• Spring-loaded Manual position – returns automatically to prevent leaving the pump running unintentionally
• Dual-LED illuminated Marina toggle switch – indicates pump status (e.g. red for manual, green for auto mode)
• Built-in 25A fuse for overload and short-circuit protection
• Compact panel (~75×60 mm) – easy dashboard installation, water-resistant and vibration-proof design

A 90-degree plastic hose adaptor designed to securely connect a Ø38 mm hose to tanks or hull fittings at a right angle. Made of white nylon for strength and durability in marine conditions.

• Tough white nylon construction – impact-resistant and non-corrosive in fresh or saltwater
• Connection size: 1¼″ internal threaded inlet and smooth 38 mm hose barb outlet
• 90° elbow design allows installation in tight spaces without kinking the hose
• Ideal for rigid water or fuel tanks – enables convenient angled routing of fluid lines
• Easy to install – screws into tank fitting and secures hose with a clamp for a leak-free connection

Upgrade your onboard shower experience with Keji II – an advanced marine shower head featuring a push-button that locks for continuous flow. Made of chromed brass, the Keji II offers a luxurious look and exceptional durability. Its “continuum flow” mode allows water to run without constantly holding the button, giving you at-home convenience even at sea. This handset is a perfect high-end upgrade for any boat shower, delivering top-tier quality and practicality.

• Function: Lockable push-button (continuum flow) – press once to start water flow and it continues until pressed again
• Material: Solid brass with chrome plating – highly corrosion-resistant, with an elegant shine and long service life
• Durability: Brass construction withstands heavy use and saltwater exposure with no leaks or mechanism failure
• Compatibility: Universal hose connection – fits standard marine shower hoses and built-in systems
• Benefits: Provides hands-free comfort while showering on board, similar to a home shower, yet with the reliability needed for yachts and boats

Nylon T-shaped connector for joining hoses in a boat’s fuel or water system. Enables a 90° branch or merge of flow between three lines. Available in a wide range of sizes (Ø10, 12, 14, 16, 18, 20 mm) for various onboard applications.

• Durable Nylon: Made from high-grade nylon, resistant to fuel, oil, and saltwater – suitable for all marine fluid systems.
• T-Shaped Connection: Joins three hoses (one inlet to two outlets or vice versa) at a 90° angle for efficient flow distribution or combination.
• Six Sizes: Offered in Ø10, Ø12, Ø14, Ø16, Ø18, Ø20 mm – covering everything from small fuel hoses to large water hoses on your boat.
• Easy Fit: Ribbed barbs insert firmly into hoses; secure with clamps for a stable, leak-proof connection.
• Universal Use: Great for repairs and custom setups – ideal for fuel lines, cooling systems, water outlets (sinks, showers), ballast or bilge lines, and more.

Straight inline threaded connector for water pumps with 1/2” threads. Allows direct connection of a pump to threaded pipes, fittings, or valves with no bends. Made of durable plastic, this fitting is lightweight and immune to rust – ideal for fixed plumbing systems on boats.

• Thread: 1/2” female thread on one side, 1/2” male thread on the other*
• Inline design – connects the pump “in a straight line” with the rest of the plumbing
• Reduces the need for extra adapters – fewer potential leak points
• Compatibility: Standard BSP threaded fitting, fits 1/2” pumps and pipes
• No corrosion or galvanic issues – plastic material safe for drinking water and saltwater environments

A rigid marine holding tank for sewage (black water) with an integrated 12V pump, available in two capacities – 40 L or 60 L. This ready-to-install kit meets ISO 8099 standards, ensuring easy containment and discharge of waste:

• Complete Kit: Includes a 12V electric pump, shut-off valve, 5-hole level sensor flange, and mounting hardware – everything needed for installation.
• Easy Pump-Out: Built-in pump enables quick emptying of the tank via a deck fitting or directly overboard (where legal), without relying on gravity drain.
• Size Options: Two versions – 40 L (approx. 500×390×300 mm) or 60 L (650×390×300 mm) – to fit your boat’s space and usage requirements.
• ISO 8099 Standard: Designed to meet marine waste tank regulations – odor-resistant, securely sealed, and safe against leaks or spills.
• Universal Compatibility: Works with all types of marine toilets (manual and electric) – makes it easy to upgrade your boat with an eco-friendly waste management system.

Our plastic boat drain plug with base is the ideal solution for efficiently draining water from your boat’s hull, preventing unwanted accumulation. Made of high-quality nylon plastic, it offers long-lasting durability in marine environments and a reliable watertight seal. Perfect for transom installation on small to mid-sized vessels.

• Watertight design with O-ring seal – prevents leaks and water ingress.
• Standard Ø23 mm size fits most boats around 3–5 m (10–16 ft) in length.
• Sturdy base flange made of UV-resistant plastic (nylon) for secure hull mounting.
• Integrated hose connection on inner side to channel water directly overboard.
• Available in white or black to match your boat; spare insert plug available separately for backup.