Pumps and Equipment

12V electric bilge pump for boat bilges, available in two capacity options: 500 GPH or 750 GPH. This compact pump is designed to keep your boat’s bilge dry by automatically (with an optional float switch) or manually removing unwanted water. Ideal for small to mid-sized vessels, the pump is easy to install and corrosion-resistant.

• Flow 500 / 750 GPH – choose 500 GPH (~1890 L/h) for boats up to ~16 ft or 750 GPH (~2835 L/h) for boats up to ~23 ft, for faster dewatering
• 12V powered – standard marine voltage, low current draw (2.2A / 2.5A) for continuous operation without draining the battery
• Compact design – low-profile, small footprint fits into tight bilge spaces; easily removable strainer for cleaning
• Versatile outlet – 19mm (3/4”) outlet nozzle with adapter for 29mm (1-1/8”) hose, ensuring efficient discharge and compatibility with various hose sizes
• Durable construction – impact-resistant plastic housing and stainless steel motor shaft; fully submersible sealed unit with overheat protection

A reliable universal bilge pump panel compatible with all 12/24V systems. Equipped with a three-function toggle (Auto/Off/Manual) and dual LED indicators, this panel provides easy bilge pump control and protection via a built-in fuse.

• Suitable for all types of bilge pumps with float switch or electronic sensor
• 3 operating modes: Automatic (via float switch), Off, Manual (manual override pumping)
• Spring-loaded Manual position – returns automatically to prevent leaving the pump running unintentionally
• Dual-LED illuminated Marina toggle switch – indicates pump status (e.g. red for manual, green for auto mode)
• Built-in 25A fuse for overload and short-circuit protection
• Compact panel (~75×60 mm) – easy dashboard installation, water-resistant and vibration-proof design

A powerful manual bilge pump (Ø50 mm diameter) for removing water from your boat, available in two sizes (390 mm and 550 mm length). This hand piston pump provides fast dewatering without electricity and comes with an extension nozzle and flexible coiled discharge hose to direct the water overboard.

• Two versions available: 390 mm (compact) and 550 mm (for deeper bilges) body length
• Large Ø50 mm cylinder – moves a high volume of water per stroke for quick pumping
• Includes an extension nozzle attachment to reach down into low areas of the bilge
• Special flexible spiral hose for discharge – directs water overboard, resists kinking
• Provides controlled pumping action – primes easily and creates strong suction for efficient water removal
• Lightweight and portable – no power needed, perfect as an emergency pump or for boats with no electrical system

TMC electric bilge pump with a capacity of 450 GPH (28 L/min) at 12V – a reliable dewatering solution for small and medium boats. This compact submersible pump has low power draw (~1.5A) and mounts easily at the bilge bottom. It features a strainer base and a 20 mm (3/4") discharge port for simple hose connection overboard.

• Flow rate: 450 GPH (gallons per hour) ≈ 28 L/min – quickly removes accumulated water
• Power: 12V DC, draws ~1.5 A – efficient and suitable for boat battery systems
• Discharge outlet: Ø19–20 mm (3/4") – standard size fitting for bilge hose
• Max head: ~2 m – pumps water up and out with sufficient height
• Compact dimensions (approx. 93×84 mm) – fits into tight bilge spaces; easy to snap off for cleaning
• Durable plastic construction (impact-resistant ABS) with stainless steel shaft – resists saltwater corrosion for long service life

Automatic submersible Ocean bilge pumps with built-in sensor (no separate float needed). These pumps provide reliable automatic water removal, activating when the bilge water rises and shutting off once the bilge is dry. An ideal solution for keeping your boat dry without manual effort or oversight.

• Fully automatic operation: Turns on when water level rises and shuts off when water is removed.
• No false triggers: Will not pump oil – motor oil in the bilge will not activate the pump.
• Easy maintenance: Features a snap-off strainer base for quick cleaning of debris.
• Multiple models: Available in 600, 750, and 1100 GPH versions, in both 12V and 24V, to suit boats of various sizes and needs.

An automatic float switch that turns your bilge pump into a fully automatic dewatering system. As the water level rises, this compact float (113x54 mm) triggers your pump on, and when the water recedes, it turns the pump off. An essential device to protect your boat from flooding when no one is on board.

• Automatic pump control: Activates and deactivates your bilge pump based on water level, no manual switching needed.
• Compact design: Small form factor (~113 mm length) allows easy installation even in tight bilge areas.
• Durable housing: Impact-resistant, non-corrosive plastic construction built for the marine environment.
• Universal compatibility: Works with most 12V/24V bilge pumps (supports loads up to ~15A) – a standard solution for small and mid-sized boats.

Automatic float switch for 12V bilge pumps (supports up to 10A load), featuring a protective cover. Reliably triggers your pump when water rises and stops it when water recedes, while the cover shields the mechanism from debris for trouble-free operation.

• For 12V systems: Designed for 12V pumps (up to 10A) – ideal for small to mid-sized boats.
• Automatic operation: Float monitors water level and turns pump on/off with no manual intervention.
• Protective housing: Cover shields the float mechanism from debris, preventing jams or damage.
• Easy installation: Standard design with mounting holes – quick to install and wire in-line with your pump.

Universal automatic float switch for bilge pumps, compatible with 12V, 24V, and 32V systems (supports up to 14A). This heavy-duty float enables automatic control of higher-power pumps, ensuring reliable operation even on larger boats and yachts.

• Multi-voltage: Operates on 12V, 24V, or 32V – a flexible choice for various vessels.
• High amperage: Handles up to 14A current – suitable for higher-capacity pumps with strong output.
• Rugged build: Heavy-duty design with water-resistant housing and a reliable mechanism for long service life.
• Auto protection: Activates your pump as water rises and shuts it off as it recedes – prevents flooding without human intervention.

Automatic bilge pump float switch with an elongated slim profile (130 x 44 x 54 mm). Designed for installations in tight spaces, it reliably switches your pump on when water is present and off when it’s drained. An ideal solution for bilges with low clearance or crowded equipment.

• Slim profile: Only 44 mm wide – fits into narrow or shallow bilges where standard floats can’t.
• Automatic control: Monitors water level and operates the pump, protecting your boat from flooding without manual switching.
• Durability: Marine-grade plastic housing and a dependable mechanism that works in fresh or saltwater.
• Universal: Compatible with most 12V/24V bilge pumps (standard amp rating) – suitable for a wide range of boats and yachts.

High-water bilge alarm system – includes an audible buzzer (85 dB) and a float sensor. When water rises above normal levels, the float triggers a loud alarm to alert the crew of potential flooding. Designed for 12V systems (float switch handles up to 14A, allowing parallel pump control if needed).

• Loud 85 dB buzzer: Highly audible alarm that catches attention even in noisy conditions.
• Float sensor: Detects high water level and automatically activates the alarm when danger is present.
• 12V compatible: Runs on standard 12V DC; float switch can control pumps up to 14A (if required).
• Enhanced safety: Early warning of excessive bilge water – gives you time to react and save your boat from severe damage.