Oars, covers, and biminis

Durable plastic end cap for bimini top frames or boat rail tubes (fits 22 mm and 25 mm). Ensures a finished look and protects tube ends from damage and moisture. Easy push-in installation for a secure, rattle-free fit.

Key Features:

• Material: High‑strength, UV-stabilized plastic for long-lasting use in marine conditions.
• Size Compatibility: Fits Ø22 mm (7/8") and Ø25 mm (1") round tubes – commonly used on bimini tops and railings.
• Protective Function: Caps off sharp tube edges to prevent injury and keep out water and debris, helping avoid corrosion inside metal tubes.
• Easy Installation: Simple push-in design – no tools needed. Snug fit ensures the cap won’t fall out or rattle during boating.
• Finished Look: Provides a neat, factory-finish appearance to your bimini top frame or railing.

Protect your inflatable boat with our high-quality 600D cover, engineered to withstand all weather conditions. This heavy-duty cover shields your boat from UV rays, rain, dust, and mildew, giving you peace of mind during storage or transport.

• Durable 600D Polyester Fabric (PU Coated) – completely waterproof and UV-resistant for maximum protection.
• Reinforced Ripstop Weave – the fabric is enhanced to resist tearing and abrasion, ensuring a long service life.
• Mold & Mildew Resistant – designed not to trap moisture, preventing mold growth during extended coverage.
• Elastic Hem & Adjustable Straps – provide a snug fit around your boat and secure the cover against wind or while trailering.

Set of chromed brass oarlocks designed for inflatable dinghies and tenders, available in two diameters – Ø12 mm and Ø14 mm – to fit various oar sizes and boat types.

• Rugged Build: Cast in chromed brass for superior saltwater resistance and load strength
• Sizes: Ø12 mm option (for smaller oars) and Ø14 mm option (for larger, heavy-duty oars)
• Compatibility: Fits most inflatable boat models (Zodiac, Bombard, etc.) – designed for standard oar sockets/bases
• Complete Set: U-shaped horn with brass mounting pin to insert into the socket (matching socket/base available separately or as needed)

High-quality marine snap fasteners (“press studs”) made of stainless steel, perfect for boat covers, bimini canvas, and protective tarpaulins. This set includes all the components needed for a secure fastening system – the top cap with spring socket, the base stud for mounting, and a backing plate for fabric installation. Designed to resist corrosion and provide a firm hold, these snaps keep your cover tightly fastened even in strong winds or boat motion.

• Material: cap made of AISI 316 stainless steel with brass spring insert – superior rust resistance in marine conditions
• 17 mm head diameter – standard size fits most marine canvas, sprayhoods, and upholstery applications
• Set includes: female snap (A+B parts) for fabric, male stud (C part) for hard surfaces, and a backing counter flange (D part) for attaching the stud through fabric
• Positive “click” locking action – stays securely fastened and will not pop open due to wind load or vibration
• UV-resistant and weatherproof – built to last outdoors in sun and saltwater environments without degradation

Give your boat canopy or railing a finished, secure touch with our AISI 316 stainless end fitting. This high-quality end cap for 22 mm or 25 mm tubing is mirror-polished for an elegant look and offers excellent corrosion resistance. It ensures your bimini top or rail assembly is both sturdy and stylish, locking the tube in place and providing a smooth, safe connection point.

Key Features:

• Compatibility – Fits round tubing of 22 mm and 25 mm diameter (common sizes for bimini tops and railings), with models available for each size. Ensures a snug, wobble-free connection.
• Premium Material – Crafted from AISI 316 stainless steel for long-term resistance to corrosion, ideal for use in marine environments where lesser metals would deteriorate.
• Mirror-Polished Finish – High-gloss finish provides an attractive, professional look and smooth feel, matching other polished hardware on your boat.
• Secure Attachment – Once in place, the end fitting firmly locks the tube end, enabling you to attach canopy fabric or connect to deck mounts without worry. It adds structural strength and prevents tube ends from sliding or collapsing.
• Versatile Application – Perfect for finishing the ends of bimini top frames, sprayhoods, railings, or handrails on boats. It serves as a connecting joint in canopy frames and railing systems, giving them a clean finished end and a point to bolt onto other hardware.

Give your open boat (plastic or aluminum hull) complete protection with this high-quality 600D cover. It’s designed to shield your boat’s hull and interior from sun, rain, leaves, and dust, thereby extending the lifespan of your vessel.

• High-Strength 600D Polyester (PVC/PU coated) – withstands heavy rain, snow, and intense sun without leaking or fading.
• Flexible, Reinforced Design – features strengthened seams and a cut that wraps securely around the boat’s bow and stern.
• Breathable & Mildew-Resistant Fabric – prevents condensation and mold growth underneath the cover during long-term storage.
• Adjustable Fit – elastic edging and included ropes/straps ensure the cover stays firmly in place even in wind or during transport.

A small specialized wrench tool designed for quickly tightening and loosening marine fasteners and turn-buttons on your boat. Made of nickel-plated brass for corrosion resistance, this key fits common canopy twist-lock fasteners, “common-sense” turn locks, and other small screw heads found on boat covers. It enables you to securely fasten or release canvas fittings without damaging the fabric or hurting your fingers.

• Custom shape for marine turn-button fasteners and screw-in snap heads on boat covers and awnings
• Compact size and ergonomic grip – easy to handle even in tight spaces on deck
• Constructed from chromed brass – will not rust and withstands the marine environment
• Prevents scratching of hardware – precisely fits the slot of the fastener to avoid slips
• Simple to use: allows quick locking/unlocking of canvas panels, straps, and covers, even one-handed

A replacement oarlock top part for inflatable boats (Ø35 mm diameter). This plastic holder with a brass pin securely locks the paddle to the boat’s socket, ensuring smooth rowing without the oar popping out. Key features:

• Standard Size: Ø35 mm cylindrical insert compatible with most inflatable boat oarlock bases (check your socket’s diameter for fit).
• Durable Material: Made of impact-resistant plastic that withstands flexing during rowing and won’t crack in cold conditions.
• Brass Locking Pin: Built-in brass pin/axle that won’t corrode – provides the hinge connection to the base and locks in place to prevent the oar from slipping out.
• Easy Installation: Fits into the existing oarlock socket on your boat and secures via the integrated pin or latch. Allows quick release when you need to remove or stow the oar.

Sturdy plastic deck base for mounting bimini top support poles at a 90° angle. Made of UV-resistant polymer for long life. Ideal for securing canopy frames on decks or any flat surface at a right angle.

Key Features:

• Angle Design: Fixed 90° bracket holds bimini poles upright when mounted on a flat surface, perfect for decks or transoms.
• Material: Durable, weather-resistant plastic that won’t corrode – lightweight yet strong enough for marine use.
• Easy Mounting: Rectangular base with countersunk screw holes for quick installation on fiberglass, wood, or metal surfaces (stainless mounting screws recommended).
• Protection: Eliminates metal-on-metal contact (no direct metal hinge on deck), reducing noise and vibration while protecting the mounting surface.
• Low Maintenance: Will not rust; UV-stabilized to resist sun damage and color fading over time.

Shield your center-console or windshield boat with this specialized 600D cover. Designed for day cruiser and RIB boats with consoles, it provides full protection for the entire hull – including the console and seating areas – against harsh weather elements.

• Thick 600D Polyester (silver UV coating) – reflects sunlight and guards your boat against scorching sun and heavy rain.
• Raised Middle Profile – the cover’s cut is taller in the center to accommodate consoles/windshields and to allow water to run off.
• Adjustable straps & clips – make it easy to secure the cover under the hull and around the console, ensuring stability in wind and during transport.
• UV & Mildew Resistant Fabric – the dense material prevents UV damage and won’t foster mold even with prolonged use.