Fuel tanks and fuel line

A universal flexible spout for fuel cans and portable tanks that makes pouring gasoline or diesel easy and spill-free. Compatible with various EVAL jerry can models (12 L, 22 L, 30 L, etc.), this spout screws on securely and features a built-in tip filter to catch debris. Made of fuel-resistant plastic, the bendable nozzle lets you pour at a convenient angle, minimizing spills and foaming.

• Easy Pouring: Ensures a smooth fuel flow when refueling boats, ATVs, generators, etc., with no glugging or splashing
• Flexible Design: The soft nozzle can flex, helping you direct the stream precisely and reach tank openings at awkward angles
• Universal Fit: Fits standard fuel can necks (EVAL and others) – includes a threaded collar for a tight, leak-proof attachment
• Built-In Filter: Fine mesh screen at the tip prevents dirt and sediment from entering your tank, protecting your engine
• Protective Cap: Comes with a small cap for the spout to stop drips or evaporation during transport and storage

A vertical tank level sensor (fuel or water) with a standard 5-hole SAE flange for easy mounting. Made of 316 stainless steel, this sender is compatible with most analog gauges (available in 240-33 Ω or 10-180 Ω ranges). It provides accurate, reliable level readings with no external moving arms. Suitable for fuel (gas/diesel) and water tanks, 12/24 V compatible – a universal solution to upgrade your boat’s tank monitoring.

• Standard Flange: 5-bolt S5/SAE pattern – bolts directly into many factory sender holes or pre-cut tank openings
• Stainless Probe: All shaft and sensor components are SS316 – resists fuel, water, and corrosion for long service life
• Accurate Sensing: Vertical float design with multiple reed switches provides stable, error-free readings even in rough seas (no sticking arm)
• Universal Compatibility: Available in 240-33 Ω (US standard) and 0-190 Ω / 10-180 Ω (European) versions – works with Teleflex, Faria, VDO, and other gauges
• Various Lengths: Offered in different lengths to fit tank depth (e.g. 15 cm up to 70 cm); custom lengths available on request for perfect fit

A special anti-froth funnel that connects to your boat’s fuel filler during refueling. It prevents overflow and splashing by turning foam back into liquid and draining it into the tank. Fitting cap sizes Ø38 mm and Ø50 mm, this attachment greatly speeds up and safeguards fuel fills – especially for diesel tanks prone to foaming.

• Spill-Free Refueling: Stops fuel from overflowing and foam from escaping the filler neck during high-speed fills
• Smart Action: Returns fuel foam to liquid and channels it back into the tank, reducing mess and fuel loss
• Universal Fit: Suits standard deck filler openings of 38 mm and 50 mm via a snug connection (for both gasoline and diesel)
• Easy to Use: Simply attach in place of your cap while refueling – no modifications needed; remove and stow after filling
• Robust Build: Durable fuel-resistant plastic construction; compact (~25 cm tall) for easy onboard storage

An angled deck filler neck (~30°) for easy hose routing in tight spaces. Made of cast 316 stainless, this filler comes in versions for fuel (marked "Fuel" – for Ø50 mm or Ø38 mm hose) and for water (marked "Water" – for Ø38 mm hose). Each variant features a screw cap with retaining chain to prevent loss, and an O-ring for watertight sealing. Stylish and durable, it upgrades your deck’s look while ensuring secure, leak-free refueling.

• Angled Neck: ~30° tilt eases hose run, avoiding kinks – perfect for low-profile decks or side mounting where straight fillers won’t fit
• 316 Stainless Steel: Mirror-polished finish resists corrosion from fuel and saltwater; stands up to impact and heavy use
• Fuel or Water: Clearly labeled caps – “Fuel” for gasoline/diesel, “Water” for freshwater, to prevent fill-up mix-ups
• Secure Cap: Screw-in cap with attached chain to avoid dropping it overboard; O-ring provides a tight seal to keep water out of the tank
• Standard Sizes: Models for Ø50 mm hose (high-flow diesel fills) and Ø38 mm hose (standard petrol/water); 3-hole mounting flange for sturdy deck installation

A high-quality brass fuel hose connector with 1/4" NPT thread, designed for secure fuel line connections. Suitable for gasoline or diesel and built to resist corrosion and heat:

• Premium brass construction – corrosion-resistant and fuel-safe material
• Standard 1/4" NPT male thread fits fuel tanks, filters, or pumps securely
• Available with barb sizes Ø6.35 mm, Ø7.9 mm, and Ø10 mm to fit various hose diameters
• Ensures a reliable, leak-free connection in your boat’s fuel system

A flexible plastic spout for easy, safe pouring of fuel from jerrycans into tanks. This nozzle attaches securely to the can’s neck and ensures controlled, splash-free fuel transfer:

• Compatible with standard fuel cans (incl. EVAL 5, 10, 20 L sizes) – quick twist-on attachment
• Flexible accordion design for directing flow into hard-to-reach filler openings
• Made of antistatic, fuel-resistant polyethylene – prevents static sparks and withstands gasoline/diesel
• Reduces spills and fuel wastage – smooth pouring with built-in venting for an even flow

A brass T-shaped fitting with 1/4" threads, designed to split or join fuel and water hoses. This durable 3-way connector resists corrosion and allows two hoses to share one source:

• Solid brass T-connector – resilient against fuel, oil, and saltwater
• Standard 1/4" threaded ports (female) – easily pairs with standard fittings and hose barbs
• Ensures even flow to two outlets – ideal for feeding two engines from one fuel tank
• Secure, leak-proof junction – suitable for marine fuel lines, freshwater plumbing, or oil systems

Spare flexible pouring spout for EVAL plastic fuel cans, available in versions for 10-liter and 20-liter jerrycans. Restore your can’s functionality and pour fuel without spills:

• S1 variant – spout for 10 L fuel can (small diameter)
• S2 variant – spout for 20 L fuel can (large diameter)
• Quick and easy to install in place of a lost or damaged original nozzle
• Provides smooth fuel flow and a tight seal to prevent leaks during pouring

A compact plastic hose barb with 1/4" male thread, designed to connect an ~8 mm ID hose to tanks, engines, or pumps. Perfect for small fuel or water setups, this connector provides a secure, durable link:

• Marine plastic – resists corrosion from fuel and saltwater exposure
• 1/4" BSP male thread fits standard ports on tanks, fuel filters, or water pumps
• Ø8 mm barb for 5/16" (~8 mm) hoses – snug hose fit and easy clamping
• Small form factor for tight spaces, delivering high reliability against leaks

Plastic hose tail connector for attaching a hose to a valve or tank outlet with male threads. Available in 5 sizes – to fit 1/2", 3/4", 1", 1-1/4", and 1-1/2" threads. Suitable for plumbing and fuel systems, this fitting ensures a strong, leak-proof connection:

• Durable polymer (PP) – resists fuels, oils, and UV exposure without cracking
• Choose size: 1/2", 3/4", 1", 1-1/4", or 1-1/2" – covers a wide range of applications
• Barb inner diameter matches standard hose sizes (e.g., 1/2" thread ≈ fits 13 mm ID hose)
• Easy installation – screws onto valve/tank, hose secures with clamp for a tight seal