Ventilation

High-quality stainless steel louvered vents to improve airflow on board. Offered in two sizes – small and large – these grilles provide continuous ventilation and an elegant look, with no risk of rust.

• Polished AISI 316 Steel: Mirror-finish marine stainless, highly resistant to corrosion, gives a sleek appearance and long service life.
• Louvered Design: Angled slats deflect direct water spray while allowing free airflow into the compartment.
• Two Sizes: Small: 203 x 108 mm (approx 20.3 cm length) with 3 slats. Large: 320 x 108 mm (approx 32.0 cm length) with 5 slats – fit different vent opening requirements.
• Low-Profile Mount: Installs nearly flush to the surface for a clean, professional look on your boat.
• Versatile Use: Great for ventilating cabins, engine rooms, battery lockers, or any enclosed space on board that needs air circulation.

An affordable and durable plastic vent grille ideal for ventilating interior spaces on your boat. Easy to install, with horizontal louvers that ensure constant airflow and reduce condensation without letting in direct splashes.

• Quality ABS: Made of white ABS plastic – lightweight, impact-resistant, and will not corrode in the marine environment.
• Louvered Design: Angled slots allow air to circulate while limiting water ingress and harsh light.
• Compact Size: Outer dimensions 260 x 127 mm fit standard vent cutouts. Perfect for small cabins, lockers, or heads on board.
• Easy Mounting: Four pre-molded screw holes in the corners enable quick and secure attachment to walls or panels.
• Use Case: Designed for indoor ventilation on a boat – cabin bulkheads, cabinet doors, head (bathroom) panels or bilge areas. Also suitable for RVs or home use where a small vent is needed.

Upgrade your ventilation system with our premium Vent Cover. Crafted from high-quality AISI316 stainless steel and featuring a stunning mirror-polished finish, this vent cover combines durability with a sleek, modern aesthetic.

• Marine-grade AISI 316 stainless steel clamshell vent cover for protecting ventilation openings from water intrusion.
• Available in two sizes (45x40 mm and 55x63 mm) to fit various vent cutouts on boats and yachts.
• Low-profile, polished design shields against spray and rain while allowing air circulation into cabins and engine compartments.

This self-bailing scupper valve keeps your cockpit dry and safe by automatically draining water out while preventing backflow. Ideal for boats with self-draining decks, it greatly improves water evacuation and is easy to maintain:

• Neutral buoyancy ball ensures a tight seal (won’t float up and break the seal).
• Provides 70% faster drainage flow than standard scuppers for quick deck drying.
• Convenient twist-off design for easy, tool-free cleaning – just twist, remove and rinse debris.
• Corrosion-resistant stainless steel pin and screws for durability in harsh marine conditions.
• Complies with ABYC standards for cockpit drains – delivering reliable, safe performance.

A compact plastic vent grille ideal for ventilating small compartments and cabins on your boat. Its durable, UV-resistant construction ensures long service life, and the design makes installation a breeze:

• Dimensions 124 x 112 mm – small footprint fits in tight spaces like lockers and consoles.
• Reinforced UV-stabilized ABS plastic – won’t crack or yellow under harsh sun and saltwater exposure.
• Easy installation – flush-mount frame with four screw holes for quick, secure attachment to hull or cabin wall.
• Low-profile louver design – sits nearly flat and angled slats deflect water splashes, keeping interior dry.
• Provides steady airflow – promotes ventilation to reduce moisture, mildew, and odors in enclosed areas.

A larger plastic vent grille designed to provide optimal airflow for bigger compartments. Made of UV-resistant ABS for dependable outdoor use, it installs easily and lets in more air:

• Dimensions 210 x 108 mm – expanded surface area delivers significantly more airflow compared to smaller grilles.
• Durable ABS with UV protection – stands up to prolonged sun exposure with no cracking or material degradation.
• Easy screw mounting – mounting flange fits the cutout and secures with 4 screws in minutes for a snug fit.
• Wide, angled slats – allow maximum air intake while deflecting rain and spray away from the opening.
• Ideal for engine rooms and bilges – improves air circulation, reducing heat and moisture in larger spaces.

Ensure optimal ventilation with our premium Stainless Steel Vent. Made from high-quality, mirror-polished AISI316 stainless steel, this vent offers superior corrosion resistance and a sleek aesthetic. Ideal for marine and various applications. Dimensions: 12 x 12 cm.

• 120 x 120 mm square ventilation grille made of polished AISI 316 stainless steel for marine use.
• Louvered slat design allows airflow into cabins or lockers while preventing ingress of rain and debris.
• Ideal for ventilating engine rooms, fuel lockers, and cabin spaces; highly resistant to saltwater corrosion and UV.

A specialized corrugated hose for ventilating engine compartments and bilges. Its self-extinguishing, heat-resistant design ensures safe removal of hot air and fuel vapors while remaining flexible for easy installation:

• Diameter Ø80 mm – standard size compatible with marine blowers and vents (fits 3-inch / 75–80 mm openings).
• Heat-resistant up to 130°C – withstands hot engine gases and air without deforming or failing.
• Self-extinguishing material – will not support combustion if exposed to flame, enhancing engine room fire safety.
• Highly flexible & lightweight – snakes through tight spaces, bends, and around equipment easily without kinking.
• Reinforced with metal wire helix – maintains its shape, resists vacuum collapse and vibration, ensuring steady airflow.

A 12-volt marine blower fan for forced ventilation of engine compartments. Built with a reinforced plastic impeller and ignition-proof motor, it rapidly expels fuel vapors and cools the space:

• Robust, heat-resistant build – housing made of reinforced thermoset plastic with corrosion-proof components, resists impact, vibration, and engine-room heat.
• High-flow radial turbine (~7 m³/min) – centrifugal fan design delivering maximum airflow through long ducts and complex hose runs.
• Flange mount for easy bulkhead install – integrated round flange allows direct fan mounting on a flat wall; inlet diameter Ø102 mm (4") fits standard vent cutouts.
• Compatible with Ø100–102 mm hoses – connects to common flexible marine ventilation hoses, ensuring a tight seal for optimal suction/exhaust performance.
• Certified (ISO 8846 / ISO 9097, CE, USCG) – motor is spark-safe and meets international ignition protection standards for operation in gasoline vapor environments.