Trailer lights and accessories

A standard 7-pin trailer socket connector made of durable plastic. Mounts on your towing vehicle or trailer and provides a reliable electrical link for all trailer lights.

• Standard 7-Pin Socket: Supports all necessary lighting functions – turn signals, brake lights, tail/marker lights, fog/reverse – through the standard 12V trailer wiring system.
• Rugged Plastic Construction: Lightweight housing is corrosion-proof and impact-resistant, with a spring-loaded cover that shields the socket when not in use, keeping out dust and water.
• Easy Installation: Features standard mounting holes (usually 2-bolt mount) for attaching to your vehicle. Inside, screw terminals allow quick connection of each of the 7 wires to the correct pins.
• Universal Compatibility: Suitable for cars, SUVs, vans, and trucks equipped with a tow bar, as well as for all kinds of trailers and caravans using a 7-pin electrical setup.

A universal 7-pin trailer plug (male connector) made of tough plastic. It attaches to your trailer’s wiring cable and plugs into the vehicle’s socket, ensuring reliable transmission of signals to all the trailer lights.

• Standard 7-Pin Plug: Suitable for all light and heavy trailers, caravans, and boat trailers that use a 7-wire electrical system. It carries the signals for turn indicators, brakes, tail lights, etc., to the towing vehicle.
• Durable Build: Weather-resistant, corrosion-proof plastic housing. Ergonomic shape for an easy grip when plugging in or unplugging.
• Secure Connection: Sturdy metal connector pins ensure a snug fit with the female socket on the vehicle. A cable gland and strain relief at the rear prevent wires from pulling out and keep water from entering.
• Easy Assembly: Disassemblable design – simply unscrew the housing, connect the 7 wires to the labeled screw terminals, and reassemble. Compatible with cables of various diameters.

A set of two galvanized mounting brackets for square trailer tail lights. Allows easy installation and removal of the lights using wing nuts – ideal for boat trailers or trailers that are frequently submerged.

• Quick Attach/Detach: The included wing nuts enable tool-free tightening and release, so you can remove or attach your lights in seconds – perfect for taking lights off before backing your boat into water or for secure storage.
• Heavy-Duty Galvanized Steel: Brackets are made of steel with a hot-dip galvanized coating to prevent rust and corrosion. Designed to withstand wet conditions and exposure to marine environments.
• Universal Design: Meant for standard square trailer lights (~100 mm size), providing a secure hold. Compatible with our tail light models and light kits for easy integration.
• Complete Set: Comes with two brackets (for left and right sides) and all necessary hardware (bolts, wing nuts) for straightforward mounting to your trailer frame.

A complete trailer rear light kit including two tail lights (left & right) with four functions each, and a pre-wired 7.5m cable with a 7-pin plug. A ready-to-use solution to equip trailers and boat trailers with proper lighting.

• 4-Function Lights: Each lamp combines brake light, tail light, turn signal, and license plate illumination, providing full rear signaling for your trailer.
• Ready-to-Use Kit: Comes pre-wired with a 7.5m harness and standard 7-pin trailer plug – no additional wiring needed. The 7.5m length covers most small to mid-size trailers.
• Easy Installation: Mount the lights to your trailer with the included bolts, run the cable along the frame, and plug it directly into your vehicle’s tow socket. Quick setup with no special tools required.
• Standard 12V System: Designed for 12V vehicle electrical systems. If needed, bulbs can be swapped for 24V versions to use with commercial trucks.
• Reliable Construction: Sturdy plastic lamp housings and quality incandescent bulbs ensure bright, clear light output. The harness is insulated and resistant to wear and weather for long-lasting performance.

A premium LED trailer light kit including two tail lights (left & right) and a 7.5m wiring harness with a 7-pin plug. It delivers bright, energy-efficient illumination and is fully waterproof – perfect for boat trailers and heavy-duty use.

• LED Technology: Built-in LEDs provide strong, crisp light for brake, tail, turn, and license plate functions. Faster response when braking and better visibility compared to standard bulbs.
• Waterproof Design: Fully sealed light housings (water and dust protected) allow submersion without damage. No worries when launching your boat or driving in heavy rain.
• Long Life & Efficiency: LEDs last much longer than bulbs (up to 50,000 hours) and consume less power – protecting your vehicle’s battery and electrical system.
• 12V/24V Compatible: The kit works with both 12V car systems and 24V truck systems without modifications – the LEDs adapt to the voltage input.
• Complete Pre-Wired Kit: All necessary components are included – a 7.5m wiring harness with 7-pin plug, pre-connected to the LED lights at the factory. Just mount and plug in.

A red triangular reflector for the rear of trailers and boat trailers. A safety essential that reflects headlights and alerts other drivers to the presence of your trailer on the road.

• Standard Triangular Design: Classic red triangle (~15 cm sides) meeting European trailer reflector regulations for rear visibility.
• High Reflectivity: Special prismatic surface that brightly reflects light even from long distances or in poor visibility conditions.
• Rugged Construction: Made from durable polymer that withstands impacts, vibrations, UV rays, and moisture without cracking or fading over time.
• Easy Installation: Pre-drilled holes for screws or bolts – simply mount the reflector on the rear of the trailer (typically one on the left and one on the right side).
• Enhanced Safety: Increases the side and rear visibility of a parked or towed trailer, even when the main lights are off.

A durable 7-pin trailer connector (female socket) with a metal housing, designed for standard 12V trailer lighting systems. The robust metal body ensures a long-lasting and reliable connection between your vehicle and trailer. Suitable for mounting on the tow vehicle (female side) – highly resistant to weather and corrosion.

• Rugged metal housing: Withstands impact, vibration, and rust, ideal for frequent towing and wet conditions.
• Standard 7-pin configuration: Connects all essential trailer lights – turn signals, brake lights, tail lights, fog light, and ground.
• Easy installation: Universal mounting holes; includes a spring-loaded cover to keep contacts clean when not in use.
• Secure connection: Firmly grips the trailer’s male plug with no wobble or disconnects during travel.
• European quality: Made in EU, compliant with ISO 1724 standard for 12V trailer connectors, ensuring safety and compatibility.

A ready-to-use extension cable with a 7-pin plug and 7-pin socket for trailers. Available in two lengths – 3 meters and 5 meters – to suit standard 12V trailers and caravans. This harness makes connecting easier when your existing cable is too short or worn out.

• Complete wiring: 7-core cable with factory-fitted male plug and female socket – plug-and-play with no additional wiring needed.
• Two length options: Choose 3m or 5m according to your needs – shorter for normal trailers, longer for caravans or larger setups.
• Standard 7-pin (12V): Compatible with all standard trailer light systems (turn, brake, tail, etc.). Color-coded wires for easy identification.
• Durable & flexible: Cable features a flexible PVC jacket resistant to wear, UV rays, and moisture. Connectors are corrosion-resistant for long service life.
• Universal use: Perfect for extending an existing harness, creating temporary connections, or replacing a damaged trailer cable on utility trailers, boat trailers, or campers.

Coiled 7-pin trailer cable that stretches up to 5 meters when needed. It comes with a male plug and female socket – ready to connect to 12V trailer or caravan systems. The spiral design keeps the cable off the ground and tangle-free during transit.

• Self-retracting cable: The coiled shape keeps the cable neat and compact; it elastically extends when the trailer turns or moves away, and springs back when tension is relieved.
• Extends up to 5m: When not stretched, the cable is compact, but under pull it provides about 5 meters of reach – suitable for longer vehicle-trailer combinations.
• Durable material: Made from high-quality polyurethane or PVC, resistant to kinking, stretching, UV rays, and extreme temperatures.
• 7-pin standard connectors: The male and female connectors are standard 7-pin (12V), compatible with all passenger and light commercial vehicles. Secure contacts ensure no signal loss.
• Ideal for: Boat trailers, trucks, trailers with varying tongue lengths, or any situation where a straight cable would drag or tangle. Suitable for both 12V and 24V systems (truck standard lighting).