Deck equipment and accessories

A heavy-duty T-fitting cast in stainless steel (AISI 316) for joining boat railing tubes at a 60° angle. Provides a strong and reliable connection for rail systems, available in two diameters to fit common tube sizes.

• Cast AISI 316 Stainless: Entire fitting is cast from high-grade 316 stainless steel for maximum strength and corrosion resistance.
• 60° “T” Design: Special Y-shaped configuration that joins three tubes at a 60° angle – ideal for bow rail splits or angled railing sections.
• Two Ø Sizes: Comes in versions for 22 mm (7/8") and 25 mm (1") tubing, covering the standard rail sizes on most boats.
• Secure Grip: Precise tube sockets and optional set screw holes ensure a tight, wobble-free joint that withstands vibration and stress.
• Polished Finish: Smooth, mirror-polished surface matches other railing hardware and won’t chafe lines or hands upon contact.

A convenient side storage pocket that organizes and secures your boat’s gear. This large, rigid compartment made of white ABS plastic features an elastic front net to prevent items from falling out, even in rough seas.

• Durable ABS Build: Rigid white ABS plastic body resists impacts, saltwater, and UV exposure – built for long-term use on board.
• Elastic Mesh Netting: The front is equipped with a stretchy mesh that holds items in and allows visibility. The net expands to accommodate odd-shaped gear (included on netted version only).
• Large Capacity: With external dimensions 540 x 244 x 120 mm, the pocket can hold a wide array of items – from tools and charts to beverages, sunscreen, and more.
• Easy Installation: Mounts to any flat vertical surface (console side, cabin wall, etc.). Self-adhesive screw cover caps are included to give a clean finished look after screwing in place.
• Two Options: With Net: Provides extra security in waves – nothing tumbles out. Without Net: Open-top pocket for quick grab-and-go access – ideal for interior use or calmer conditions.

A robust marine-grade padlock made from corrosion-resistant materials, perfect for securing lockers, hatches, and equipment on your boat. A brass body and stainless shackle ensure long life even in saltwater. Available in multiple sizes to fit every onboard locking need.

• Marine-Grade Build: Chrome-plated brass body and stainless steel shackle resist rust and sticking, even in damp, salty conditions.
• Safety Lock Mechanism: High-quality locking cylinder (Abloy-type) for enhanced security and pick resistance.
• Choice of Sizes: Padlocks approximately 25, 30, 40, 50, and 60 mm wide are available – from small locker locks to large hatch and door locks.
• Versatile Use: Ideal for locking deck lockers, storage hatches, anchor chain lockers, engine compartments, or even securing an outboard motor (with a chain/cable).
• Weather Resistant: Built to withstand rain, salt spray, and UV exposure without rusting or seizing, ensuring smooth operation in marine environments.

Upgrade your RIB (rigid inflatable boat) with this heavy-duty stainless steel roll bar, featuring an adjustable width and fold-down design for easy storage. Built to mount lights, antennas, and accessories, it enhances safety, style, and functionality on your inflatable boat.

• Marine-Grade Steel: Fabricated from polished AISI 316 stainless steel for superior strength and corrosion resistance in harsh marine environments.
• Adjustable Width: Telescoping base fits boat transoms from 106 cm to 156 cm (small model) or 156 cm to 206 cm (large model) for a customized fit on various RIB size.
• Fixed Height & Folding Design: Stands 120 cm high for optimal visibility, and features foldable bases that allow the bar to tilt forward for low-clearance storage or transport.
• Accessory Mounting Plates: Integrated mounting plates on top and sides accommodate navigation lights, antennas, radar reflectors, or fishing rod holders.
• Improved Safety & Style: Provides a sturdy handhold for passengers and crew, while giving your RIB a sleek, professional look and a convenient place to attach equipment.

Upgrade your boat’s rail with this premium stainless steel rod holder. Made from AISI 316 marine-grade steel, it clamps onto 25–32mm rails to provide a secure, polished rod holder anywhere along your boat’s handrail:

• High-Quality Stainless: Crafted from corrosion-resistant AISI 316 steel with a mirror-polished finish for maximum durability and shine
• Rail Clamp 25–32mm: Adjustable clamp fits standard rails (1″ to 1¼″ diameter) – no drilling required
• Secure Rod Support: Holds your fishing rod in a 42.5mm inner diameter tube, keeping it stable during trolling or cruising
• Versatile Positioning: Can rotate around the rail for ideal rod angle; perfect for boat rails on bow, stern, or console

An affordable and durable plastic vent grille ideal for ventilating interior spaces on your boat. Easy to install, with horizontal louvers that ensure constant airflow and reduce condensation without letting in direct splashes.

• Quality ABS: Made of white ABS plastic – lightweight, impact-resistant, and will not corrode in the marine environment.
• Louvered Design: Angled slots allow air to circulate while limiting water ingress and harsh light.
• Compact Size: Outer dimensions 260 x 127 mm fit standard vent cutouts. Perfect for small cabins, lockers, or heads on board.
• Easy Mounting: Four pre-molded screw holes in the corners enable quick and secure attachment to walls or panels.
• Use Case: Designed for indoor ventilation on a boat – cabin bulkheads, cabinet doors, head (bathroom) panels or bilge areas. Also suitable for RVs or home use where a small vent is needed.

This round opening porthole in stainless steel is perfect for adding light and fresh air to your cabin without letting in insects. It features a built-in mosquito screen and comes in two sizes to suit different boats.

• Made of polished stainless steel frame with durable plexiglass window
• Integrated mosquito screen keeps bugs out while ventilating
• Available in two sizes (outer diameters 200 mm and 300 mm)
• Fits hull thicknesses from 16 to 33 mm
• Provides a watertight seal when closed for weather protection

Add a combination of reliability and style to your boat with our folding cleat made of AISI 316 stainless steel. This flip-up cleat lies flat when not in use, preventing tripping and giving your deck a clean look. Crafted from high-grade stainless steel for maximum corrosion resistance, it features smooth edges designed to protect your ropes from chafing while providing a secure tie-down point.

Key Features:

• Space-Saving Fold-Down Design – Cleat flips down flat into a recessed base when not needed, keeping the deck clear and safe from tripping hazards.
• Stainless Steel AISI 316 – Marine-grade 316 steel construction ensures excellent corrosion resistance and durability in saltwater environments.
• Smooth, Safe Edges – All edges are polished and rounded to protect mooring lines from chafing and to prevent injuries when walking on deck.
• Strong and Reliable – Despite its folding capability, the cleat is sturdy and reliable when deployed, providing a secure point to tie your boat.
• Two Sizes Available – Comes in 6-inch (152 mm) and 8-inch (200 mm) lengths to suit different vessel sizes and needs. Use the 6″ cleat for smaller boats and the 8″ cleat for larger boats or heavier duty applications.

High-quality jaw-eye swivel made of AISI 316 stainless steel, offering a secure rotating connection between a clevis (jaw) and an eye. One end features a jaw with a pin (shackle-like end) that can attach to an anchor, chain, or fitting, and the other end is a closed eye for tying or shackling a rope or chain. This design allows for 360° rotation, preventing tangles in anchor rodes and rigging. Ideal for connecting anchors to chains or joining dissimilar rigging components that need to rotate freely.

• Material: Marine-grade AISI 316 stainless steel (corrosion-proof)
• Design: One jaw (with removable pin) + one eye; swiveling joint for full rotation under load
• Usage: Ideal for anchor-to-chain connection, attaching swiveling to a deck fitting, or any application needing a rotatable link between a pin connection and an eye connection

A compact plastic storage locker designed to flush-mount in your boat, offering a convenient spot to organize accessories and gear on board. Its sturdy construction and UV-resistant material ensure long-lasting performance in damp, salty conditions.

• Outside dimensions: 240 x 145 mm; Inside: 195 x 95 mm; Depth: 48 mm
• Made of UV-resistant, weatherproof plastic (Luran) for durability
• Easy flush installation on any flat surface (cockpit, console, cabin wall) for a seamless look
• Provides a dry, protected space for tools, charts, keys, and small items
• Clean white design blends with boat interiors and will not corrode or rust