LED 360° Anchor Light (White, Black, or Stainless Housing)

The “Evoled” series of LED anchor lights offers a modern, energy-saving solution to illuminate your boat when anchored overnight. With 360° visibility around your vessel, other mariners can spot you from afar, preventing collisions in the dark hours. Beyond its technical advantages, this light comes in three distinct housing styles – white, black, or stainless steel – to complement any boat aesthetic, whether it’s a contemporary powerboat or a classic sailing yacht. The built-in LEDs consume extremely little power (~2W), so you can confidently leave the light on all night without draining your battery. The unit is completely sealed at the factory, meaning there are no serviceable parts – install it and forget it, knowing it will shine whenever you need it.

• Use cases: Used as an anchor (all-round white) light during nights or low-visibility conditions when your vessel is stationary (anchored or moored outside a marina). The 360-degree bright white light clearly signals your presence to nearby ships, keeping you safe from unwelcome close calls. It can also double as a general deck or camp light thanks to its low draw, for instance when rafting up with friends or overnighting in a calm cove.
• Vessels/environments: Suitable for sail and power boats up to 20 m (65 ft) in length – from small yachts and catamarans to larger cruisers that stay out overnight. The COLREG72/ABYC-C5 certifications ensure the light meets requirements for this class of vessel (typically 2 NM visibility, mounting height, etc.), so you can be confident about compliance. The light is bright enough to be noticed in busy waterways or remote areas where you might be the only one out there in the dark.
• Installation tips: It can be mounted in various places – most commonly at the masthead (for sailboats) or on a dedicated light pole or arch (for powerboats), so it’s as high as possible and unobstructed by other structures. The 100 mm tall design means the fixture is compact and lightweight, minimizing stress on the mounting point. Connect the two wires to your 12V system (using a 1–2A fuse, since the draw is low). If upgrading from an older anchor light – these models are dimensionally compatible with many standard bases, making it easy to switch to LED. Maintenance: Virtually maintenance-free – there are no bulbs to replace (the LEDs last for tens of thousands of hours) and the unit is sealed. Just periodically check the clear lens – if salt deposits accumulate, wash it with water to restore full brightness. Ensure the electrical connections are well-insulated from moisture during installation for long-term reliability.