600D Day Cruiser Boat Cover (with Console) – Heavy-Duty White Cover

This rugged 600D cover is specially crafted for boats with a console or small cabin (such as day cruisers, bowriders, or RIBs with a helm console). It features expanded dimensions and a unique cut that allows it to cover not only the hull but also the elevated center section – the steering console, windshield, and seating areas. Thanks to its raised middle profile, the cover creates a tent-like shape that prevents water from pooling on top of the console and ensures rainwater runs off to the sides. The 600D material has an inner silver coating that reflects UV rays and further protects the boat’s plastic and vinyl components (dash, seats, electronics) from overheating and cracking. The front of the cover tapers to snugly fit the bow, while the rear has ample length and girth to envelop the engine well or an outboard motor. Adjustable nylon straps with quick-release buckles are included – they run under the hull and clip together, allowing fast and easy securing. Additional ties can be used around the console itself if needed to cinch the fabric around it.

Use Cases: This cover model is ideal for boats up to ~7 m in length that are equipped with a central or side console. It enables you to confidently leave your boat outdoors in the marina or on a trailer, without worry about rain, dust, or UV rays. Even during extended periods, your boat’s interior (console gauges, upholstery) will remain dry and protected. When properly strapped, the cover can withstand windy conditions – you can even use it during long-distance trailering. It’s recommended to prop the cover up (the console itself can serve as a support) to ensure a slope for water runoff when in use.

• Size 475x240 cm (Code 0063342): Suitable for console boats around 4.7 – 5.0 m in length. Fully covers ~4.8 m boats, including a low windshield and helm console.
• Size 525x260 cm (Code 0063344): For boats about 5.25 m long. Ideal for 5.1–5.4 m boats, this size’s extra width (2.60 m) can accommodate boats with a wider beam and consoles that have forward seating.
• Size 600x280 cm (Code 0063346): Designed for boats around 6.0 m in length. Provides generous coverage for 5.7–6.2 m boats, also suitable for console RIBs where the inflatable tubes add to the beam.
• Size 625x280 cm (Code 0063348): Fits boats approximately 6.25 m long. This size gives a bit of additional length for 6.1–6.4 m boats, ensuring the transom and motor are fully covered.
• Size 650x300 cm (Code 0063350): Suitable for boats around 6.5 m in length. With a 3.00 m width, this cover spans beamy 6.3–6.7 m boats, including those with a roll bar or frame above the console (up to a certain height).
• Size 700x315 cm (Code 0063352): The largest size – for boats roughly 7.0 m long. Completely covers 6.8–7.2 m boats, providing protection even for taller glass windshields and small cabin tops.

By choosing this 600D console boat cover, you’re giving your vessel the best care possible. It’s engineered with the needs of speedboats and RIBs with consoles in mind – hence it fits tightly and won’t flap around.

Benefits: keeps your boat’s electronics and helm dry, protects seats and cushions from UV aging, and shields the hull from dirt and minor impacts (branches, hail). When it’s time to launch, removing the cover is quick, and underneath your boat will be just as clean as when you covered it.