Ladder Retaining Clip – Plastic Holder for 22–25mm Tube (Marine Ladder Bracket)

Keep your boat’s boarding ladder secure and your deck organized with our plastic ladder retaining clip. This handy holder is specifically designed to grip a ladder’s tubing (or any round rail/tube) of 22 to 25mm diameter (approximately 7/8″ to 1″), which covers the standard size of most removable or folding swim ladders used on boats. Constructed from high-quality marine-grade plastic (polymer) that is UV-stabilized, it withstands sunlight, salt, and temperature extremes without cracking or becoming brittle, ensuring a long service life even in harsh marine environments.

Measuring 76mm in length, the clip provides a generous contact area to hold your ladder firmly. The design features a U-shaped clamp that the ladder leg snaps into. The plastic has just enough flex to allow easy insertion and removal of the ladder tubing, but it’s rigid enough to hold the ladder tightly in place during travel. This prevents the ladder from rattling, swinging outward, or falling off when the boat is underway or trailered. By securing the ladder, you avoid potential scratches or dents to your boat’s transom and eliminate annoying noise or movement.

Key features and usage:

• Secure ladder storage: When your boarding ladder (or dive ladder) is not deployed in the water, use this clip to lock it against the transom or gunwale. Many boaters mount a pair of these clips to stow a folding ladder vertically on the transom. The clips hold the ladder’s side rails, so it won’t bounce or slide. This is especially useful for inflatable boats or RIBs, where a ladder might otherwise hang loosely, or for any boat where you remove the ladder after use and want to stow it securely along a rail.
• Versatile holder: Aside from ladders, this clip can be used to hold other tubular equipment. For instance, it can secure a boat hook, keeping it reachable yet out of the way. It can hold a gaff, a deck brush handle, fishing rod (gaff or net) handles, or even a section of bimini top frame when folded. In RVs or homes, similar clips are used for holding pipes or tools – so you might find additional creative uses on board or on shore.

The ladder clip is available in multiple colors – typically white, grey, and blue – so you can choose the color that best matches your boat’s color scheme or deck. The white version blends nicely with white gelcoat or marine interiors, grey is neutral and often matches metal or aluminum finishes, and blue can complement certain accents or just be easily visible.

Design & Installation:
Each clip has a flat base (76mm long) with two countersunk screw holes for mounting. Installation is straightforward: position the clip where the ladder leg naturally rests when stowed (often one near the ladder’s bottom end and one near the top for a two-clip system). Make sure the placement allows the ladder to fully engage in the clip and consider using two clips per ladder for maximum stability (one clip can work for lighter ladders or to secure one end). Mark the hole positions, drill pilot holes (if mounting into fiberglass or wood), and then use the provided stainless steel screws to fasten the clip. If mounting on a very smooth or curved surface, adding a small amount of marine adhesive sealant under the base can help keep it firmly in place and seal any screw holes.

Once installed, using the clip is simple: push the ladder’s tube into the clip until it snaps in. The clip’s jaws will flex and then grip around the tube. To release, pull the ladder tube out with a firm tug – the plastic will flex and let it go. The material is resilient and designed for countless snap-in/snap-out cycles without losing its grip or shape.

These clips are relatively low-profile when mounted, meaning they won’t pose a hazard when the ladder is removed. Their rounded edges and smooth finish prevent any snagging on ropes or gear and are safe to brush against (no sharp metal parts). They are also lightweight and will not corrode, requiring virtually no maintenance beyond an occasional rinse.

By using ladder retaining clips, you’ll protect both your ladder and your boat: the ladder stays put (no chafing or banging into the hull), and it’s always ready for deployment when needed. No more tying the ladder with improvised cords or worrying about it shifting. Whether you have a small powerboat, a sailboat with a swim ladder, or even a pool ladder at home, this plastic clip is a simple and effective solution to keep it secure.