Mini Recessed LED Courtesy Light 12/24V (71x15 mm, Inox Face, Blue or White)

This miniature LED fixture (71 mm long by only 15 mm tall) is designed to provide decorative and safety lighting on board without taking up space or drawing attention when off. Its visible face is made of polished stainless steel, which blends seamlessly with any modern boat interior or exterior – plus, it ensures long-term resistance to saltwater and humidity. The light installs flush – using a concealed screw mounting system – so once in place, only the slim inox bezel is visible, lying flat against the surface.

Inside are 3 LED chips of roughly 0.75W each, combining for about 2.25W of light output. They emit a focused glow suitable for marking pathways or highlighting specific areas. For example, when installed at intervals along the companionway steps to the cabin, these lights safely outline each step in the dark. They can also be embedded around the cockpit seating area or in the floor of the salon to create a pleasant ambiance and guiding illumination at night.

A major advantage of model 01989 is its dual-voltage compatibility – it runs on both 12V systems (common in smaller boats) and 24V systems found on larger yachts. This makes integration straightforward with no additional voltage converters needed. The LEDs are long-lived (typically over 30-50 thousand hours), so you won’t need to replace them for years. The lamp comes in two light color options: blue – favored for night lighting because it preserves night vision and adds a modern aesthetic, and warm white – for brighter, more natural illumination of interior spaces.

Use Cases & Recommendations: It’s perfect for illuminating steps, thresholds, deck outlines, and cabinets. You can use this mini LED light wherever you want subtle illumination: for instance, in the cockpit around seating, on the stairway to the flybridge, around the engine room perimeter, or even inside the head compartment as a night light. Recommended for boats of all sizes (from 3–4 m skiffs to large yachts) – on small boats it can serve as primary orientation lighting (given the limited space, even a small light goes a long way), and on large vessels it functions as accent lighting for design and safety. On longer yachts, these lights are often installed in series along corridors and deck edges to create a continuous guide line of light. Thanks to its 24V capability, installation on high-voltage yacht systems is plug-and-play. If mounting outdoors (on deck), ensure the provided gasket is seated properly to keep water out. Choose the blue version for a high-tech, modern accent at night, or the white light if you need a bit more brightness for general visibility.