30W, 70W & 100W Rigid Monocrystalline Solar Panels (IP67 Waterproof)

These rigid monocrystalline solar panels provide a reliable source of green energy for your boat, RV, or off-grid system. They use high-efficiency cells that maximize the current harvested from sunlight, even in cloudy conditions. The rugged build features a corrosion-resistant aluminum frame and tempered glass protecting the solar cells from impacts, salt spray, and hail. This ensures years of operation with minimal loss of performance.

With an IP67 protection rating, the panels are fully waterproof and dustproof. That means they can withstand rain, sea spray, and high humidity – perfect for marine environments or installation on a deck, RV roof, or other outdoor areas. Each panel comes with pre-attached solar cables and waterproof MC4 connectors for easy hookup to a charge controller and your electrical system. By using these panels, you can keep your batteries charged and run onboard equipment with solar energy, reducing the need for generators or shore power.

• 30W Panel: Compact size ideal for maintaining battery charge on smaller boats (around 4–6 m) or camper vans. Perfect for trickle-charging a battery, powering lights, a small camping fridge, or other minor loads. It helps offset idle power draw and extends your battery’s life.
• 70W Panel: A mid-range output recommended for medium-sized boats (6–8 m), RVs, or remote cabins. It provides significantly more energy – enough for lighting, navigation instruments, charging phones/laptops, and other moderate devices. It can keep batteries topped up during longer trips or when at anchor for extended periods.
• 100W Panel: A high-output panel suitable for larger vessels (8+ m) or more complex off-grid systems with multiple appliances. This panel generates ample power to charge larger battery banks and run equipment like navigation electronics, lights, pumps, etc. It can be used alone or combined with additional panels for even greater energy production.
• Flexibility & Expansion: You can wire multiple panels together (in parallel or series, depending on system requirements) to achieve higher power or voltage. This allows you to expand your solar array if your energy needs increase over time.
• Usage Tips: For best results, mount the panel facing direct sunlight and keep its surface clean. Use an appropriate PWM or MPPT charge controller (e.g., a 30A unit for a 100W panel) to connect to your battery and prevent overcharging.