Solar Flashing LED Warning Beacon (6 LEDs, Green/Yellow) with Monocrystalline Panel

This solar LED beacon provides reliable, high-visibility signaling with no external power required. The built-in 0.25 W monocrystalline solar cell charges the included 1600 mAh Ni-MH battery during the day, and an intelligent sensor automatically activates the light at dusk. The lamp flashes at approx. 90 times per minute with bright pulses that catch the attention of mariners and observers. It comes in two color variants – Green (04618-GR) and Yellow (04618-Y) – each suited for different applications: The green light is often used to mark clear paths, starboard-side navigation markers, or as a general signal, whereas the yellow light conveys caution, special purpose markers, or highlights work areas. The unit is built from polycarbonate and ABS with added shock protection – made to withstand marine weather challenges. It is fully waterproof and will operate even in heavy rain or spray. Installation is simple: mount it onto a buoy, pole, railing, or other surface; with an optional base (e.g. code 04588) it can also be set up in a fixed position. Zero maintenance: All it needs is sufficient sunlight by day – no wiring and no nightly battery changes required.

• Buoy and Navigation Markers: The solar beacon (especially the green version) is perfect for attachment to buoys or channel markers, indicating safe passages, harbor entrances, or hazards – it charges by day and reliably flashes at night unattended.
• Special Marking & Work Zones: The flashing yellow light attracts attention and is used to signal construction areas on water, race courses, fishing nets, or dredging operations – enhancing safety by alerting others to their presence.
• Emergency Anchor Light and Gear: It can serve as a temporary anchor light for small boats or life rafts when a standard white light isn’t available – by flashing, the yellow beacon signals your position to others (Note: for permanent anchoring, official regulations require a steady white light).
• Long Autonomous Operation: After a full charge, the lamp runs all night (8–10+ hours), which is ideal for off-grid locations or as a backup signal in emergencies.
• Easy Setup & Portability: The compact design (Ø72×153 mm) allows quick placement and relocation. The lamp is self-contained with no external wires – just secure it and it automatically operates on its own.