AAA World-wide Enterprise

Waterproof connector set including a male plug and female socket, designed for 12V or 24V systems. Available in 2-pin or 4-pin versions, this set provides a reliable electrical link for equipment on your boat or vehicle. Ideal for powering auxiliary gear (lighting, pumps, coolers, etc.) with a quick-disconnect capability. Built for marine environments – with rubber seals and a robust housing to withstand moisture, spray, and corrosion.

• Plug & Socket Set: Includes one male plug and one female socket for a complete connection
• 2-Pin or 4-Pin Options: Choose 2-pin (two-conductor) or 4-pin for more complex wiring needs
• 12V/24V Compatible: Suitable for both 12-volt and 24-volt electrical systems
• Water-Resistant Design: Sealed connectors keep water and dirt out when connected
• Durable Build: Corrosion-resistant metal pins and tough plastic housing for long-lasting performance

Multi-position screw terminal block with 4 or 6 way points for joining electrical conductors. Equipped with nickel-plated steel screws and nuts, it provides secure contacts (up to ~20 A each) and proper insulation between circuits. Ideal for branching wires in boats, vehicles, and machinery.

• Available in 4-way (4-screw) or 6-way (6-screw) versions – choose based on your wiring needs
• Max current ~20 A per connection; operating voltage up to ~30 V DC (low-voltage systems)
• Steel screws with nickel plating – strong threaded connections, protected against rust
• Insulating base resists oil/fuel – prevents shorts between adjacent terminals or to chassis ground
• Easy panel mounting with screws; multiple blocks can be aligned in a row to create larger distribution assemblies

Durable green starboard navigation light for boats up to 20m, ensuring clear nighttime visibility and compliance with marine regulations. It features a rugged housing and simple installation:

• 12V, 15W bulb casting a bright green 112.5° beam per COLREG standards (vessels ≤20m)
• Tough plastic housing (white or black) resists UV, corrosion, and impacts
• Fully waterproof sealed design to prevent water intrusion and salt damage
• Easy surface mount with included screws and gasket; fits on any vertical hull area
• Certified ~2 NM visibility range for enhanced safety during night voyages

A white stern light for boats up to 20m that clearly marks your vessel’s rear at night. It features a broad 135° beam, durable housing, and easy installation to ensure safety and compliance:

• 12V, 15W white marine bulb illuminates a 135° stern arc per COLREG requirements
• Sturdy plastic housing (white) resists UV rays and saltwater; fully sealed against leaks
• Ideal for mounting on the transom or aft rail – compact, low-profile design
• Provides ~2 NM visibility from behind to alert overtaking vessels of your presence
• Quick installation with included hardware; easy upkeep with replaceable bulb or LED upgrade option

A dependable red port-side light for boats up to 20m that boosts safety during night voyages. It offers a 112.5° light sector, rugged durability, and convenient installation:

• 12V, 15W red bulb provides a clear 112.5° beam (port side) meeting navigation requirements
• Durable housing (white or black) made of high-quality plastic, resistant to UV and marine exposure
• Waterproof and shock-resistant build for reliable operation in rough conditions
• Quick mount on the hull – stainless screws included; low-profile design that preserves boat aesthetics
• Visible at ~2 NM, ensuring your port side is noticed in time by other vessels

A ready-to-use cable set with connectors for quick and reliable hookup of a solar panel to a boat, RV, or other photovoltaic system. Enables fast installation without soldering or special tools.

• Complete kit: Includes a twin solar cable (positive & negative leads) with factory-attached standard solar connectors (MC4 compatible) – everything needed to link your panel to a charge controller.
• Easy & secure connection: Plug-and-play connectors allow rapid panel attachment/detachment, eliminating risk of cross-wiring. Color-coded for + and – to prevent polarity mix-ups.
• Weather-resistant: Cables feature UV-resistant insulation for outdoor use. Connectors are waterproof (IP67) and sealed against dust and corrosion – ideal for marine environments and long-term outdoor exposure.
• Proper gauge & length: Made with multi-strand copper conductors of optimal gauge to minimize voltage drop for typical solar currents. Provides ample length (generous lead on both positive and negative) for flexible panel placement.
• Universal compatibility: Compatible with all standard 12V/24V solar panels and PWM/MPPT controllers. Perfect for boats, yachts, campers, RVs, home solar setups, garden lighting, and more.

Powerful marine LED underwater light for transom or hull installation, built with a polished Ø137.5 mm stainless steel body for long-lasting performance in saltwater. Available in 4-LED or 6-LED configurations and in either brilliant white or vivid blue illumination to create an impressive underwater glow.

• Rugged Build: Machined AISI 316 stainless steel housing (137.5 mm length) with mirror finish – resists corrosion and impact
• Fully Submersible: IP68 waterproof rating – engineered for continuous underwater use without water intrusion
• Multi-Variant Output: Choose 4 LEDs (~3W total, ~372 lm) or 6 LEDs (~10W total, 603 lm) for extra brightness
• Dual Color Options: White LED for maximum brightness and visibility, or Blue LED for an attractive ambient glow beneath the waterline
• Wide Beam: 120° illumination angle – lights up a broad area behind your boat, perfect for night leisure and fish-attraction

A versatile series of underwater LED lights featuring corrosion-proof plastic housings with optional stainless steel bezels. Two sizes are available – compact (Ø96 mm) with 3 LEDs and extended (160.7 mm length) with 6 LEDs, in either blue or white color. The stainless “SS” versions focus the beam into a narrow 15° spot, while the standard plastic models provide a wide 120° flood illumination.

• Sizes: Small model 96.2 x 59.2 x 22 mm (3 LEDs); Large model 160.7 x 59.2 x 22 mm (6 LEDs)
• Power: ~5.4 W (small, white) or 12 W (large, white) – 10–30V DC input supports both 12V and 24V systems
• Brightness: White output ~710 lm (6 LED) / ~460 lm (3 LED); Blue output ~159 lm (6 LED) / ~88 lm (3 LED)
• Construction: Marine-grade polymer body; “SS” variants add a polished 316 stainless steel bezel for a premium look
• Beam Angle: 120° wide beam (flood) on standard versions; 15° narrow beam (spot) on INOX bezel models – ideal for long-range underwater lighting

A compact Ø80 mm underwater light featuring a high-output 5W LED chip enclosed in a mirror-polished AISI 316 stainless steel housing. Perfect for smaller boats, jet-skis, or accent lighting, this lamp provides a bright white or stylish blue illumination and is fully IP68 waterproof for below-waterline installation.

• Material: Solid 316 stainless steel body with mirror finish – resists rust and saltwater corrosion
• LED Power: 5W high-power LED – equivalent to ~50W halogen brightness with minimal heat generation
• Voltage: Universal 12V or 24V DC input (operates on both via built-in driver)
• Dimensions: 80 mm diameter; only 25 mm thick – low-profile design for transom or hull mounting
• Colors: Available in bright white for maximum visibility or deep blue for an ambient underwater glow