Electrical Equipment

Copper crimp cable lugs for terminating heavy-duty cables. Tin-plated to resist corrosion, they are ideal for battery terminals, ground connections, and other high-current links. Available for cable sizes from 4 mm² up to 95 mm².

• High-purity copper with tin plating – excellent conductivity and no corrosion or oxidation
• Cable cross-section sizes: 4, 6, 10, 16, 25, 35, 50, 70, 95 mm² (covers a wide range of cable gauges)
• Bolt hole diameters from M5 to M12 (depending on lug size) – fits standard battery posts, studs and bus bars
• Crimp-on installation (requires crimping tool) – provides a strong, low-resistance bond between wire and lug
• Use cases: terminating battery cables, starter motor leads, main ground straps, solar & inverter wiring, and other high-current connections

A small ON/OFF rocker switch module with built-in LED illumination, designed as a replacement for boat switch panels. Runs on 12V and lights up when the switch is on, providing a clear status indication. This switch snaps into compatible panel frames (or mounts via clips) and is commonly used in accessory or dash panels for controlling devices like lights or pumps. Rated around 10A, it’s an ideal spare part to restore functionality to worn-out switches on your control panel.

Heavy‑duty 22 mm brass push‑button switch, sealed with rubber, waterproof, ideal for marine use.

Enhance your vessel’s control panel with this marine-grade push‑button switch. It features a chrome-plated brass housing and a durable rubber seal, designed to withstand salt spray and moisture. With a panel cut-out diameter of 22 mm and an external bezel diameter of 30 mm, it installs easily via threaded bushing and nut. The momentary push‑button delivers reliable performance for horn, ignition, kill switch, or emergency functions. Robust waterproofing ensures durable operation in harsh environments—essential for any boat helm.

A waterproof 12V power socket in white, designed for marine use. This standard “cigarette lighter” outlet features a protective cap and locking collar to provide a secure power source for accessories (GPS units, chargers, lights) on board.

Enhance your boat's electrical system with this 6-gang waterproof switch panel, featuring durable rubber covers for each switch, ensuring protection against water ingress and reliable performance in marine environments.

An in-line glass tube fuse holder for 6.3x30mm (AGC/JTC) fuses featuring a built-in LED indicator that lights up when the fuse blows. Handles up to 30A on 12V circuits. A convenient, high-visibility solution for protecting electronics in automotive and marine applications.

Durable rubber seal cap for marine-grade switches, available in Ø 10mm and Ø 12mm sizes to prevent water ingress.

Protect your marine switch panels with Eval’s waterproof seal caps (code 01372). These robust rubber caps snugly fit switch shafts of Ø 10 mm (01372‑10) and Ø 12 mm (01372‑12), preventing water, dust, and salt spray from entering the control housing. Made from durable, UV-resistant rubber, they are essential in maintaining IP integrity of your marine electrical systems. Easy to install—just push over the switch shaft—and ideal for helms, outdoor instrument panels, and exposed switch arrays.

A reliable universal bilge pump panel compatible with all 12/24V systems. Equipped with a three-function toggle (Auto/Off/Manual) and dual LED indicators, this panel provides easy bilge pump control and protection via a built-in fuse.

• Suitable for all types of bilge pumps with float switch or electronic sensor
• 3 operating modes: Automatic (via float switch), Off, Manual (manual override pumping)
• Spring-loaded Manual position – returns automatically to prevent leaving the pump running unintentionally
• Dual-LED illuminated Marina toggle switch – indicates pump status (e.g. red for manual, green for auto mode)
• Built-in 25A fuse for overload and short-circuit protection
• Compact panel (~75×60 mm) – easy dashboard installation, water-resistant and vibration-proof design

Waterproof inline fuse holders with pre-attached 260mm leads for blade-type fuses. Available in two versions: one for standard ATO fuses (up to 30A) and a smaller one for mini blade fuses (up to 30A). Both feature sealed caps and durable cables, ideal for marine and automotive use.

Enhance your anchoring system with this marine-grade windlass control panel. Featuring a waterproof Up/Down switch with spring release, integrated safety fuse holder, and dual LED indicators, it ensures reliable and safe windlass operation. Note: Requires connection to a remote switch; does not control the windlass directly.