Oars, covers, and biminis

Plastic oarlock and base set for inflatable boats, providing a watertight oar mounting. Available in two sizes – Ø43 mm and Ø52 mm inner fork width – to accommodate different oar thicknesses.

• Complete Set: Includes U-shaped oarlock horn + round base for gluing/mounting to the boat
• Sizes: Choice of Ø43 mm or Ø52 mm inner opening (fits oars of various diameters)
• Strength: Made from reinforced nylon with integrated stainless steel component for extra durability
• Sealed Fit: Special watertight base design prevents air leaks and water ingress into the tube

A chromed brass male clip/stud designed to be attached to canvas, tarpaulin or boat cover fabric. This male fastener part installs securely onto the material and provides an attachment point for a corresponding female clip or deck fitting. Made of solid brass with a shiny chrome finish for an elegant look and corrosion protection, it is compatible with common canopy and cover fastening systems.

• Male clip/stud that mounts directly on fabric (via crimping or riveting through the canvas)
• All-brass construction with chrome plating – rustproof and built for harsh marine conditions
• Pairs with code 03974 (female clip) – together they form a secure canvas-to-canvas connection
• Smooth rounded head – prevents chafing of fabric and gives a professional finished appearance
• Ideal for bimini tops, boat covers, side curtains, and other marine canvas attachments

Durable PVC base for mounting a bimini top (sun canopy) on inflatable boats. Ensures secure attachment and quick removal of the canopy as needed.

• Dimensions: 9 x 7 cm – wide base for stable support on the inflatable tube
• Material: UV-resistant PVC pad designed to glue onto PVC boat tubes
• Quick-release design: includes insert for Ø22 mm canopy pole, allowing easy detachment
• Universal use: ideal for small RIBs, dinghies, and other inflatable boats
• Corrosion-proof: all-plastic construction won’t rust – perfect for saltwater use

White plastic clip for holding an oar against the boat when not in use. Available in two sizes for Ø20 mm and Ø30 mm oar diameters. Ideal for securing oars alongside inflatable or hard boats.

• Sizes: Options for thin oars (Ø20 mm) and standard oars (Ø30 mm)
• Material: UV-resistant white nylon – will not corrode and withstands marine conditions
• Easy Mounting: Can be glued to an inflatable tube or screwed to a hard surface
• Secure Grip: Holds the oar firmly to prevent rattling or rolling while underway

A male clip with a 2-hole base made of chromed brass, designed for mounting on a solid surface (deck, gunwale, frame). This “foot” style fastener has two screw holes for firmly fixing it to the boat, and a protruding stud onto which a female canvas clip attaches. It provides a strong and stable anchor point for covers, ensuring canvas is held taut against the boat’s structure.

• Base plate with two 5 mm screw holes – standard spacing for easy installation
• Brass construction with chrome finish – weather-resistant for long-term outdoor use
• Mates with clip 03974 (female part) – creates a secure “canvas-to-boat” connection
• Low-profile, rounded design – won’t snag lines and is foot-friendly when stepped on
• Ideal for securing bimini tops, console covers, engine covers, etc., directly to the boat

Designed for cabin boats and cruisers, this 600D cover provides maximum stem-to-stern protection – including the cabin superstructure. Keep your cabin boat dry and clean through all seasons with a durable cover that withstands UV rays, rain, snow, and salty sea air.

• Ultra-Tough 600D Marine Fabric – repels water and resists fading, ideal for prolonged outdoor use.
• Extended Cabin Height – a special design that covers the boat’s entire cabin/coach roof, protecting windows, hatches, and electronics.
• Extra Reinforced Seams – critical areas are strengthened to endure tension from wind and water pooling.
• Secure Fastening – comes with strong ropes/straps to tie down under the hull; elasticated panels ensure a tight wrap around the boat.

Set of 2 combined brackets for holding an oar or boat hook, made of sturdy plastic with stainless steel reinforcement. Designed to mount on a boat and secure poles Ø28–32 mm in diameter for convenient storage.

• Dual-Purpose: Acts as a holder for oars or boat hooks – a universal bracket for any pole in the Ø28-32 mm range
• Materials: Tough UV-stable plastic body + flexible stainless steel insert for a secure snap-in grip
• Installation: Easy to screw onto deck, railing, or any solid surface (pre-drilled holes for quick mounting)
• Safety: Firm no-wobble hold – prevents the oar/hook from bouncing or falling out even in rough conditions

A chromed brass turn-button fastener for canopies, consisting of a base and a rotating tab, which acts as a locking mechanism for canvas. This “common sense” fastener secures the canvas with a quarter-turn – firmly locking a cover in place and preventing accidental release. It mounts with screws to a solid surface and pairs with a grommet or eyelet on the fabric.

• Classic marine twist-lock mechanism – rotate 90° to lock or unlock the canvas
• Made of chrome-plated brass – corrosion-resistant with a strong spring tongue
• Two mounting holes for screws – easy to install on wood, fiberglass, or metal surfaces
• Compatible with snap eyelet 03974 – the canvas stud/grommet engages under the turn tab
• Ideal for canvas doors, hatches, covers – where a more robust latch is needed than a simple snap

Telescopic boat hook made of lightweight yet sturdy anodized aluminium. Handy for all kinds of maneuvers – docking, grabbing mooring buoys, or retrieving lines. It features a durable plastic hook end and a non-slip PVC grip handle for a secure hold. Floating design – it won’t sink if dropped overboard.

• Two-stage telescoping pole (compact for storage, extends for use)

• Material: Aluminium alloy, anodized for corrosion resistance, ~30 mm diameter outer tube for rigidity

• Hook: Durable nylon hook with wide opening and blunt tip that won’t scrape your boat

• Locking: Twist-lock mechanism secures the pole at the desired length without slipping

• Safety: Bright-colored hook end (usually orange/red) for visibility; floats in water if accidentally dropped

A female canopy clip (socket) made of nickel-plated brass, intended to be attached to canvas. This piece acts as the receiving end of the fastening system – it connects with a male clip or turn-button on the boat. Durable and corrosion-resistant, it holds the fabric securely without tearing or distorting it, even with repeated use.

• Solid brass with nickel plating – excellent resistance to rust and wear
• Sized to fit clips 03997, 03977 and turn fastener 03975 – universally compatible
• Installs on fabric by crimping/riveting – forms a smooth grommet that won’t damage the material
• Strong spring retention – snaps tightly and won’t come undone unintentionally
• Ideal for all types of covers, side curtains, biminis – a standard component for canvas fastening or repairs