Oars, covers, and biminis

A universal aluminum T-top sunshade for boats, designed to protect the center console area from the sun. Light yet sturdy, this Ø44mm model offers a balance of strength and flexibility – adjustable to fit various consoles and equipped with a high-quality ATLAS canopy. It’s an ideal choice for recreational and semi-professional use on medium-sized boats.

• Strong Ø44mm aluminum frame (anodized) – provides stability with minimal weight, featuring reinforced resin joints and excellent weld quality
• Adjustable mounting – adapts to console widths (up to ~100 cm), a universal solution for different models of motorboats and RIBs
• Blue ATLAS canopy (UV-protected & waterproof) – marine-grade 340 g/m² polyester, fade-resistant and easy to remove for cleaning
• 2.0 x 1.4 m shade coverage – fully shelters the console and helm area, protecting the captain and electronics from harsh sun
• Tested up to 25 knots – dependable at normal cruising speeds; no excessive wobble or noise when properly secured

Robust cover for jet skis, made from waterproof 300D polyester with PA/PU coating. Provides superior protection for your personal watercraft from sun, rain, dust, and debris, especially during storage out of water or off-season. Available in 3 sizes to fit different jet ski types:

• 300D heavy fabric – tear-resistant polyester with double-stitched seams, withstands UV rays and heavy rain; inner PA coating for complete waterproofing.
• Full coverage – covers the entire jet ski (hull, seat, handlebars), shielding it from fading, scratches, and dirt during storage or transport.
• Elastic hem – integrated elastic around the bottom edge for a snug fit to the hull; additional tie-down straps keep the cover secure in wind or when trailering.
• 3 sizes available – S for small jet skis (~260-290 cm length), M for standard 2-3 seater models (~270-320 cm), L for large 3-seater and touring models (~300-340 cm length, extra width).
• Easy to use – lightweight yet tough cover stretches over your jet ski in a minute; when removed, it folds neatly into the included storage bag.

A replaceable large oar blade for Ø35 mm diameter shafts, intended for heavy-duty oars on larger boats. The 60 x 12.5 cm size provides greater paddling force for moving the boat quickly. Made of reinforced ABS plastic, this spare blade withstands intensive rowing and harsh conditions. Available in different colors (e.g., grey, black) to match your equipment.

• Ø35 mm Compatibility: Fits handles with 35 mm diameter – typical for oars of larger inflatables and lifeboats.
• Large Surface: The 60 x 12.5 cm dimensions allow for a stronger push with each stroke, ideal for heavy boats or against currents.
• Reinforced Plastic: Constructed from high-strength ABS, reinforced to resist bending and cracking; withstands UV rays and saltwater without degradation.
• Easy Installation: Quick to swap – slide the new blade onto a Ø35 mm shaft and secure it firmly with a bolt/pin.
• Color Variety: Offered in more than one color option (e.g., black or grey) so you can replace your blade with a close match or improved visibility.

A robust rail guide with a swiveling roller, designed to guide ropes or loads being pulled at an angle. This compact (18 cm) metal assembly withstands working loads up to 200 kg and is perfect for mounting on trailers or decks where the pull line is off-center. The pivoting roller automatically aligns with the direction of force, ensuring smooth boat loading onto a trailer or hauling heavy gear without binding or chafing.

• Short track (18 cm) with a movable carriage – allows ~10–15° off-axis pulling without snagging or jamming the rope
• Swivel-mounted steel roller – follows the pull direction, providing smooth feed and reduced friction for loads up to 200 kg
• Heavy-duty metal construction (stainless steel) – impact and corrosion resistant, suitable for use in wet/salty environments and demanding conditions
• Built-in locking handle (spring pin) – secures the sliding carriage when needed and enables easy release for adjustment or removal
• Recommended uses: boat trailers, ramps, and davits – ideal for safely guiding a boat onto a trailer when it’s slightly off-line, as well as redirecting tensioned lines on deck without strain

The plastic strap bridge is a strong, durable loop designed for securing webbing straps to boat covers and canopies. Made of UV-resistant nylon, it won’t corrode and withstands marine conditions. It comes in two sizes to fit different strap widths, providing a secure anchor point for cover tie-downs during transport or storage.

• Material: High-strength plastic (nylon) construction, UV-stable and saltwater-proof
• Sizes: Small bridge (27 mm inner width) fits straps up to ~25 mm; Large bridge (40 mm inner width) fits straps ~40 mm wide
• Installation: Easily mounts with screws or rivets to the boat hull, frame, or canvas as needed
• Use Cases: Ideal for boat canopies, bimini tops, covers, and cargo straps – keeps webbing tight and in place
• Advantages: Will not rust, lightweight with smooth edges (prevents strap chafe and wear)

The EVAL console cover shields your boat’s helm (wheel, instruments, electronics) from rain, dust, and UV damage. Made of tough 300D polyester with a waterproof PU coating, it features reinforced double stitching and an integrated drawstring hem for a snug fit. Available in 4 different sizes to suit a range of boats – from compact RIBs to larger center-console vessels.

• Material: 300 Denier polyester fabric with waterproof PU coating; built to withstand sun and seawater
• Design: Elastic cord perimeter + drawstring fastening – cinches tight around the console for secure fit
• Seams: Double-stitched seams with extra reinforcement/taping to endure strong wind without tearing
• Protection: UV-resistant treatment prevents sun damage and fading; keeps console dry and dirt-free in all weather
• Sizes: 4 sizes (S, M, L, XL) – fitting most boats (approx. 3 m up to 7 m). Choose the right size based on your console’s height and width.

A spare paddle blade for Ø30 mm oar shafts, measuring 60 x 12.5 cm, designed for standard oars on medium-sized boats. This sturdy plastic blade restores your oar if it breaks or wears out, maintaining the same rowing efficiency. Compatible with Ø30 mm handles (aluminum or wood) and engineered for quick, secure installation.

• Ø30 mm Socket: Fits oars with 30 mm diameter – commonly used on medium inflatable boats, rowboats, and canoes.
• Optimal Size: The 60 x 12.5 cm blade provides an excellent balance of power and ease of rowing for boats around 3–4 m.
• Durable Plastic: Material resists impacts, flexing, and UV rays; keeps its shape even with prolonged use.
• Swap in Minutes: Intuitive installation – slide onto the handle and secure with a bolt; no special tools required.
• Practical Spare Unit: Indispensable as a backup part in your boat kit – compact and lightweight yet a lifesaver in an emergency.

A high-quality stainless end fitting for boat canopies (bimini tops), featuring a ball-and-socket swivel for full range of motion. This eye end installs at the tube terminus of the canopy frame (Ø22mm or Ø25mm) and provides a flexible connection to the mounting base – allowing the top to pivot and fold without straining the supports. Made of polished AISI 316 steel, it offers a combination of sleek appearance and corrosion-proof strength.

• AISI 316 stainless steel – durable end fitting, resistant to rust and saltwater, ideal for marine use
• Spherical “ball” head – swiveling insert that allows 360° movement in all directions for optimal angle alignment
• Standard sizing and compatibility – available in two diameters (22mm and 25mm) to fit the most commonly used canopy frame tubes
• Secure attachment – inserts into the tube and locks in place with a set screw/pin, ensuring a sturdy link between the canopy frame and its deck hinge or bracket
• Eases folding of the canopy – the ball joint design relieves stress during folding or raising of the top, extending the life of the canvas and hardware

The Ø5 mm plastic snap stud base is part of a marine canvas fastener system (snap buttons for boat covers). This piece acts as the male stud mounted on a hard surface (hull, fiberglass, frame) to which the canvas attaches via a snap. Made of impact-resistant plastic, it will not corrode and comes in white or black to blend with your boat’s trim.

• Function: Male snap stud (base) for press-stud fasteners – secures covers, curtains, cushions by snapping together with the female part
• Installation: Mount with a flat-head screw (Ø4.8–5.5 mm); 5 mm inner diameter accommodates standard screws flush
• Material: Tough engineering plastic (UV-stabilized) – non-corrosive and marine-grade for saltwater use
• Colors: White or black – choose to match your boat or canvas color, with no rust stains over time
• Advantages: Lightweight, no sharp edges; securely holds the snap under vibration and high winds, won’t scratch surfaces

A premium stainless steel T-top by Oceansouth Atlas – engineered for maximum durability and versatility. Built from polished AISI 316 tubing (Ø35mm) and fitted with a high-quality canopy, this T-top is adjustable in width and height (up to 140 cm wide, 210 cm tall), making it universal for various boats. It’s available in two versions: a standard model and one with 4 integrated rod holders (for fishing enthusiasts).

• Frame made of polished AISI 316 stainless steel, Ø35mm – top-tier corrosion resistance and a sleek finish; ideal for saltwater and professional use
• Adjustable “Atlas” design – width adjusts from ~50 cm to 140 cm, height up to 210 cm, ensuring a snug fit on almost any center console
• Durable canopy (OceanBlue) – waterproof and UV-proof Atlas fabric 280 g/m² in blue color; easily removable for cleaning or storage
• Easy assembly and removal – modular construction allows quick disassembly (canopy and top frame slide out) for transport or offseason storage
• Available model with 4 rod holders – variant 48.195.51 includes four built-in stainless rod holder tubes, turning the T-top into a perfect fishing platform