Oars, sockets and rowlocks

A round oar stop collar with an inner diameter of Ø35 mm and a length of 85.7 mm, made of grey PVC plastic. This collar prevents the oar from sliding too far through the oarlock while rowing, by fixing the oar’s position. It installs easily on the oar shaft and ensures more efficient and safe rowing.

• Size: Inner diameter 35 mm (for oars Ø35 mm), collar length ~85.7 mm – provides a broad contact area for support
• Material: Durable PVC (light grey) – impact-resistant, UV-stable, and saltwater-proof; lightweight and non-corroding
• Function: Acts as a stopper – keeps the oar at the optimal position in the oarlock so it doesn’t slide out or in too far
• Installation: Slides onto the oar shaft; can be secured with a small screw or adhesive to prevent slipping
• Application: Suitable for boat, dinghy, and canoe oars around 35 mm diameter – an ideal spare accessory if original oar stop rings are lost or worn

A chromed brass rowlock with base designed for secure and durable attachment of an oar to your boat. Ideal for small rowing and inflatable boats, this set provides a reliable pivot point for rowing:

• Material: Made of brass with a chrome-plated finish for maximum corrosion resistance in marine environments.
• Base Socket: Includes a brass base socket (52 mm depth) with two mounting holes for easy installation on the gunwale.
• Standard Size: 12 mm pin diameter – compatible with most boat oars and sockets.
• Reliability: Rugged construction withstands heavy rowing and is a superior alternative to plastic rowlocks that can break easily.
• Application: Perfect for wooden dinghies, fishing boats, and inflatables (2–4 m length) where a stable oar lock is required.

A set of lightweight aluminum oars, specially designed for inflatable boats and dinghies. These oars disassemble into 2 pieces for easy storage, combining durability and convenience. Key features:

• Lightweight Construction: Aluminum shaft Ø29 mm with reinforced plastic blades – resists corrosion and impact, yet remains light for effortless rowing.
• 2-Piece Design: Each oar consists of two sections that assemble quickly. When taken apart, each piece is short enough to fit in a carry bag or inside the boat itself.
• Ideal for Inflatables: The lengths (143 cm, 153 cm, 163 cm) are optimized for small inflatables, rubber dinghies, and rowable rafts. Also suitable as replacements for original equipment oars.
• Comfortable Grips: Ergonomic T-shaped handles on the top end provide a comfortable grip and control over the oar.
• Easy Transport: The entire set is compact and lightweight – perfect for camping, beach trips, or as spare gear, without taking up unnecessary space.

A classic set of wooden oars made from white birch – lightweight, sturdy, and featuring a traditional square blade profile. Sold in pairs and available in various lengths (2.0 m, 2.3 m, 2.5 m) for rowboats, fishing boats, and canoes. Key features:

• High-Quality Wood: Crafted from white birch, known for its excellent strength-to-weight ratio and moisture resistance, giving the oars natural flex and buoyancy.
• Lightweight & Balanced: “Light type” oars – reduced weight to minimize rowing fatigue without sacrificing strength. Well balanced for smooth, consistent strokes.
• Square Blades: Flat, rectangular blades with a classic design that ensures a steady catch in the water and efficient propulsion. Ideal for gentle rowing and precise control.
• Protective Finish: The polished surface is varnished/sealed to guard against moisture, UV rays, and cracking. This extends the lifespan of the wooden oars and maintains their pleasing appearance.
• Different Sizes: Available in lengths of 200 cm, 230 cm, and 250 cm. Choose according to your boat size: shorter for small boats, longer for wider boats and more powerful rowing.

Secure your oarlocks with this reliable galvanized base socket. It provides a sturdy mounting point on your boat for the oarlock pin and is built to withstand harsh marine conditions without rusting. Two size options are available to fit different installation needs.

• Solid galvanized steel base for long-lasting corrosion resistance
• Fits standard 13 mm oarlock pins for a secure, wobble-free oar connection
• Offered in two sizes/styles to accommodate various boat mounting configurations

A spare bolt (pin) for an inflatable boat oarlock system. This component replaces a lost or damaged rowlock pin and ensures your oar remains securely attached to your inflatable boat:

• Compatibility: Designed to fit the inflatable boat rowlock assembly (EVAL code 02199-7) and similar oarlock systems on rubber dinghies.
• Durable Build: Brass pin with threading and a tough PVC locking cap provide a secure hold, resistant to corrosion and harsh marine conditions.
• Safety Design: The locking cap is equipped with a tether cord to prevent dropping or losing the pin in the water when detached.
• Easy Installation: Quickly swaps in for the original pin – allows you to fasten or release the oar from the rowlock in seconds without tools.
• Essential Spare: A must-have spare part for any inflatable boat owner with oars, ensuring you’re never left unable to row due to a lost or broken oarlock pin.

A chromed rowlock socket (oarlock base) designed for flush mounting on a boat’s gunwale, measuring 60x23 mm with a 12 mm internal bore. The robust brass construction with chrome finish provides a long-lasting support point for your oarlock:

• Material: Brass with a polished chrome plating – resists corrosion, impact, and heavy stress.
• Dimensions: Rectangular base 60 x 23 mm (two mounting holes) and 12 mm inner diameter to accept the rowlock pin.
• Mounting: Flush (vertical) mount on a horizontal surface – easily secures to the gunwale or flat surface with 2 screws.
• Universal Fit: Compatible with most standard 12 mm rowlock pins (brass or stainless) – perfect for replacing worn-out or plastic sockets.
• Usage: Ideal for rowboats, wooden skiffs, canoes, or small sailboats where a reliable, durable oarlock base is needed.

A rowlock with blind (closed-bottom) socket made of chromed brass. Perfect for modern boats with double hulls or plastic construction, this product ensures reliable rowing without the risk of water seepage:

• 2-in-1 Design: Includes a U-shaped rowlock with bayonet lock and a sealed bottom socket (base) that doesn’t require through-hull drilling – ideal for boats with hollow gunwales or double walls.
• Material & Build: All-brass construction with a mirror-polish chrome finish – high strength, corrosion resistance, and a sleek appearance.
• Dimensions: Pin diameter Ø12 mm (standard); inner width of fork ~45 mm; height above base ~58 mm. The base covers holes up to Ø46 mm – replaces plastic sockets without modifications.
• Stability: The bayonet locking mechanism prevents the rowlock from popping out during rowing. The oar stays securely attached until you intentionally release it with a twist and pull.
• Use Case: Suitable for boats ~3–5 m (fishing boats, workboats, RIBs with rigid sides) where you want to upgrade from flimsy plastic oarlocks to sturdy metal ones. Ideal for plastic or fiberglass boats with double-skin hulls, as the blind socket keeps water out.

A universal aluminum paddle with a 35 mm shaft – durable, affordable, and easy to use. Suitable for various small boats (rowboats, inflatables, fishing dinghies). Available in multiple sizes for the best fit. Key features:

• Sturdy Aluminum: Made of a tough aluminum tube (35 mm diameter), this paddle resists bending and corrosion, ensuring a long service life.
• Standard Design: No fancy mechanisms – a one-piece paddle with a simple design, which makes it reliable and low-maintenance.
• Variety of Lengths: Available in 140 cm, 160 cm, and 180 cm lengths, covering the needs of very small boats up to medium-sized rowboats.
• Comfort Grip: Smooth plastic T-handle for a comfortable hold. It allows good control while rowing and reduces hand fatigue.
• Broad Blade: Plastic blade with an optimal surface area to generate thrust in the water. The blade is securely attached to the shaft and withstands the stress of vigorous rowing.