Bow rollers and accessories

A compact bow anchor roller made of durable PVC, designed for small boats and inflatable craft. It assists in deploying and retrieving the anchor, protects the hull/tube from chafing by rope or chain, and guides the anchor line correctly during recovery. Ideal for mounting on the bow of inflatable boats (adhesive attachment) or small boats where corrosion-free hardware is preferred.

• Lightweight & Durable: Constructed entirely from UV-resistant PVC – will not rust, stands up to impacts and saltwater, ensuring long-lasting use.
• Compact Dimensions: Measures 14 cm (L) × 9.5 cm (W) × 6.5 cm (H) – perfect for tight spaces on small decks or on inflatable tubes.
• Boat Protection: Smooth roller guides the anchor rope or chain away from the inflatable tube or hull, preventing damage and abrasion during anchoring.
• Easy Installation: Can be bolted to the bow of rigid boats or glued onto the PVC fabric of an inflatable with appropriate adhesive (PVC base for gluing).
• For Small Anchors: Compatible with the lightweight anchors and rodes used on small craft (e.g., folding grapnel anchors 1.5–4 kg, small Danforth 2–3 kg, etc.).

A 2.0 m foldable aluminum gangway (passerelle) designed for easy boarding and disembarking from yachts and boats. Made of anodized aluminum with a non-slip tread surface, this gangway is lightweight, sturdy, and convenient to store – it folds in half. Equipped with stainless steel hinge pins for quick separation and transport. The perfect solution for marinas, docks, or stepping ashore.

• Strong & Lightweight: Constructed from marine-grade anodized aluminum – won’t rust and keeps weight low (~13 kg), allowing one person to easily deploy or remove it.
• Anti-Slip Surface: Walking platform features a grating coated with white anti-skid material, ensuring secure footing even when wet.
• Foldable Design: The gangway folds in half, with two quick-release stainless steel pins connecting the sections – folds/unfolds in seconds and stows compactly on deck or in a locker.
• Standard Dimensions: 2.0 m length, 33 cm width – suitable for small to mid-sized vessels. The width provides comfortable passage, and the slim profile fits common deck brackets.
• Boarding Convenience: Makes boarding passengers easy, especially when there’s a height gap between boat and dock. Can be used with handrail lines (not included) for added safety if needed.

A stainless steel anchor bow roller measuring 200 mm in length and 50 mm in width, suitable for small to medium anchors. Made of polished stainless steel, this bow guide allows the anchor and chain to run smoothly during deployment and retrieval, protecting your bow and deck. Easy to install on the bow – provides secure stowage for the anchor and makes anchoring operations easier.

• Quality INOX: Constructed entirely from marine-grade stainless steel – corrosion-resistant, strong, with a polished finish that looks great and withstands harsh marine conditions.
• Compact Size: 20 cm length, ~5 cm inner width – designed for small/medium anchors (approximately up to 10 kg) and their chains (fits chain about 6–8 mm).
• Smooth Chain Feeding: Features an integrated roller made of wear-resistant polymer or stainless, ensuring smooth rotation and minimal friction when handling rope or chain.
• Protection & Security: Keeps the anchor away from the hull during retrieval, preventing knocks against the bow. Also allows the anchor to be locked in place (pin hole provided – pin not included) when stowed for safe travel.
• Easy Universal Mounting: Pre-drilled base holes match standard layouts – simple to bolt onto the deck/bow structure with proper hardware. Suitable for sailboats and powerboats needing a reliable bow roller.

A heavy-duty bow anchor guide with double rollers, made of stainless steel, measuring 328 mm in length and 70 mm in width. This dual-roller assembly is designed for larger anchors and loads – the twin roller system provides better support and smooth chain movement at varied angles. Ideal for boats and yachts equipped with heavier anchors (10–20+ kg) that require reliable guidance and secure stowage of the anchor.

• Dual Roller Mechanism: Two sequential rollers share the load – the forward roller takes weight during retrieval, while the aft roller keeps the chain/rope aligned at the proper angle to the windlass or deck. This reduces wear and eases strain on the windlass.
• Robust Build: Solid marine-grade stainless steel frame with reinforced structure and a locking pin eye. Resists bending under heavy loads and won’t corrode – suitable for permanent installation on larger vessels.
• High Compatibility: Approximately 70 mm gap between rollers – fits wider anchor shanks of Delta, Bruce, Rocna, etc., in the ~10–20 kg range. Can accommodate thicker chain (up to ~10 mm) without binding.
• Safe Anchor Stowage: Extended 33 cm length holds the anchor well off the hull until fully on deck. A hole for a locking pin is provided – allows you to secure the anchor for safe travel underway.
• Professional Mount: Mounts to the bow with multiple fasteners – meant for boats 8 meters and up. Gives a professional finish and greatly improves convenience and safety in anchoring operations.

Achieve smooth anchor handling with this compact bow roller, made of marine-grade AISI 316 stainless steel. The high-quality construction ensures exceptional corrosion resistance and longevity, even in harsh saltwater conditions. Designed for small to mid-size boats, it enables trouble-free anchor dropping and retrieval while protecting your boat’s bow.

 

Sturdy bow anchor roller made of stainless steel, 300mm long, ensuring safe guiding of the anchor during launch and retrieval. Ideal for boats using anchors up to ~10kg, protecting the bow from impact and chafing.

• High-quality marine grade AISI316 stainless steel construction (corrosion-resistant)
• 300mm length, base approx 80×80mm – suited for anchors up to about 10kg
• Provides smooth, snag-free feeding of anchor chain and rope
• Shields the boat’s bow from damage during anchoring operations

Specialized bow roller designed for “Bruce” and “Force” style anchors (claw anchors), crafted from polished AISI316 stainless steel. Available in two lengths (380mm and 480mm) to accommodate anchors up to 10kg or 15kg. A self-launching design makes dropping the anchor easier, while secure holding ensures safe stowage.

• Mirror-polished AISI316 stainless steel body – superior corrosion resistance and strength
• Built for claw/Bruce anchors: 380mm version (for anchors ~up to 10kg, chain 6–8mm); 480mm version (for anchors ~up to 15kg, chain 8–10mm)
• Self-launching mechanism – hinged front section tilts to allow the anchor to drop freely when deploying
• Secure anchor lock in raised position – holds the anchor firmly at the bow during travel

Versatile double anchor bow roller made of AISI316 stainless steel, designed for heavier anchors (8–15 kg). Its twin-roller configuration ensures smooth passage of chain and rope, as well as extra stability when handling the anchor. The rugged construction guarantees reliability in all conditions.

• Dual roller system – two rollers guide both rope and chain without jamming
• Dimensions: 420mm length, 76mm width; suitable for ~8–15kg anchors (medium to larger boats ~7–10+ m)
• All-stainless (AISI316) build – saltwater-resistant construction for long-lasting performance
• Stable bow mounting – keeps the anchor aligned and secure, reducing swing and rattle in waves

Replacement plastic roller (sheave) for bow anchor roller assemblies. Ideal for swapping out a worn or broken wheel – restores smooth chain and rope movement. Sturdy construction with a metal insert for extended lifespan.

• Diameter Ø37.5mm, width 32mm – a standard size fitting many anchor rollers
• Made of reinforced plastic (black) resistant to UV and seawater exposure
• Built-in metal bushing – protects the wheel and pin from abrasion and wear
• Easy to install in place of the old wheel – quickly returns your anchor roller to full functionality