Transom boards and transom pads

A white plastic transom pad protects your boat’s stern from damage when mounting an outboard motor. This durable plate (300 x 220 mm) spreads the engine clamp load and prevents slipping or scratches on the transom.

• Size: 300 x 220 mm (also available in a larger 430 x 350 mm version for higher horsepower engines)
• Material: tough UV-resistant polypropylene with a textured surface for secure grip of engine clamps
• Shields fiberglass/wood transoms from crushing, cracking, and scratches caused by motor clamps
• Easy to install with screws or adhesive – suitable for all boat types and outboard motors
• Weatherproof, saltwater-proof, and oil-resistant – provides long-lasting transom protection

A robust aluminum transom bracket for an auxiliary outboard engine (up to 35 kg). This adjustable mount lets you easily raise and lower your kicker motor, featuring durable stainless steel springs and four locking tilt positions for the ideal angle.

• Capacity: up to 35 kg (suitable for outboard engines ~up to 10–15 HP)
• Foldable design with 4 locking positions – allows lifting the motor out of the water when not in use
• Constructed from anodized aluminum (frame) and marine-grade stainless steel (springs & bolts) for corrosion-resistant durability
• Sturdy mounting pad made of multi-layer marine plywood (sealed coating) – withstands vibration and UV exposure, ensuring a firm clamp
• Easy transom installation – perfect for small powerboats, fishing vessels, and sailboats needing a backup engine

When you need the strongest solution for your auxiliary engine, choose our heavy-duty stainless steel motor bracket. Engineered for motors up to 25 HP (60 kg), this bracket features a rugged AISI 316 stainless steel build and a resilient plastic mounting pad (white or black) to handle larger outboards with ease.

• Supports outboard motors up to 25 HP / 60 kg
• Heavy-gauge AISI 316 stainless steel frame with high-strength plastic pad (white or black)
• Four-position adjustable bracket with stainless springs for easy lifting and lowering of heavy motors

Upgrade to maximum durability with our stainless steel auxiliary motor bracket. Built to support engines up to 20 HP (40 kg), this heavy-duty bracket combines AISI 316 stainless steel construction with a weatherproof plastic mounting board (available in white or black) for long-lasting performance.

• Supports outboard motors up to 20 HP / 40 kg
• Marine-grade AISI 316 stainless steel frame with durable plastic pad (white or black)
• Four adjustable tilt/height positions with stainless springs for secure motor positioning

Secure your small outboard motor with our lightweight anodized aluminum bracket. Designed for engines up to 15 HP (40 kg), this bracket offers sturdy support for your auxiliary motor and comes with a durable plastic mounting board available in white or black.

• Supports outboard motors up to 15 HP / 40 kg
• Lightweight anodized aluminum frame with UV-resistant plastic mounting pad (white or black)
• Four adjustable height/tilt positions with spring assist for optimal engine placement

A sturdy stainless steel bracket for a backup outboard engine rated up to 40 kg. This fixed transom mount provides a reliable support for an auxiliary motor (up to ~15 HP) with its all-steel construction and a stable, wide wooden mounting block.

• Max engine weight: 40 kg (approximately up to 15 HP motors)
• All polished marine-grade stainless steel – resists corrosion and built for long-term use
• Solid marine plywood mounting pad (replaceable) – dampens vibrations and ensures a firm clamp on the motor
• Fixed mounting angle with option to choose from multiple tilt positions during installation (pre-drilled holes)
• Easy transom installation – ideal for backup motors on fishing boats, sailboats, and RIBs; use of a safety tether is recommended for security

Looking to mount a heavier auxiliary outboard? This heavy-duty stainless steel bracket with a wooden pad is engineered to handle engines up to 15 HP (60 kg) with ease, offering a reliable secondary motor mounting solution. Crafted from premium AISI 316 stainless steel, it combines strength, corrosion resistance, and a classic design.

• Supports outboard motors up to 15 HP / 60 kg – high load capacity for larger kicker engines
• Heavy-duty AISI 316 stainless steel frame with a thick marine-grade wooden pad
• Spring-assisted, adjustable bracket with multiple positions for optimal motor trim and height
• Built to resist rust, saltwater, and vibration – for long-lasting, secure performance

A lightweight yet tough plastic pad for mounting your outboard engine, designed to protect and reinforce the transom. Made from reinforced, UV-resistant polypropylene with a textured non-slip surface, this plate distributes clamp pressure and prevents engine slippage. Available in multiple sizes (e.g. 270×100 mm and 227×87 mm) and colors (white or black) to suit your setup.

• Even load distribution – protects the transom from pressure points and dents
• Reinforced polypropylene – UV-resistant plastic that stays strong under sunlight
• Anti-slip texture – new type of knurled surface for a tighter and safer engine grip
• Easy to use – slips between the motor clamp and transom; shields the boat’s “mirror” (transom) from scratches and wear

A rectangular 300×95 mm aluminum plate designed for mounting and reinforcing outboard engine installations or accessories on the transom. Made of high-strength anodized aluminum, it serves as a backing plate on the inside of the transom or as a solid base for various brackets. The plate distributes the stress from bolts, preventing transom cracks and flex, and can be drilled to accommodate your specific hole pattern.

• High-strength anodized aluminum – rust-free, adds rigidity to the mounting
• 300×95 mm size – covers a broad area, fits standard bolt layouts
• Reinforces the transom as an interior backing plate for engine installations (including higher horsepower)
• Easy to drill/work – can be customized with holes; versatile usage

Grey PVC base for mounting the transom board on inflatable boats. This stern support bracket securely holds a 25 mm thick wooden transom plate to the tubes, providing a strong, watertight bond between the inflatable hull and the rigid transom.

• Repair & build ready: Ideal for replacing worn-out supports or installing a new transom – fits standard 25 mm transom board thickness.
• Wide gluing area: Large PVC pad (540 x 100 mm) glues to the tube for maximum hold – distributes stress and ensures reliability even with higher engine thrust.
• Robust construction: Made of reinforced PVC, resists pull and twist forces, handling engine vibrations and shocks.
• One transom set: Typically used in pairs (left & right) – sold per piece so you can replace only one side if needed.
• UV & salt resistant: The grey PVC material won’t degrade from sunlight or seawater – remains flexible and strong over years of use.