Railings and handles

A compact plastic handle (205 x 55 mm) for boats made of weather-resistant PVC – ideal for both interior and exterior installation.

• Dimensions: 205 mm length, 55 mm height – conveniently compact to fit in tight spaces
• Durable PVC construction resists UV rays and saltwater for long service life
• Easy to install with two bolts; suitable for mounting on decks, cabins, lockers
• Light grey color blends with most boat interiors and stays cooler under sunlight

A large, robust plastic handle (250 x 65 mm) for boats, providing a steady grab point on deck or in the cabin. Available in light grey or white.

• 250 mm length x 65 mm height – heavy-duty build offers a comfortable two-handed grip under higher load
• Tough PVC construction, UV and weather resistant (built for marine use)
• Simple installation with two bolts (one at each end) for secure attachment; will not corrode
• Colors: light grey or white – choose to match your boat’s design and style

Angled stainless steel rail base (60° tilt) with a rectangular flange. Perfect for mounting railing posts or bimini support poles on sloped surfaces. Made of marine-grade AISI 316 steel with a mirror polish for durability and style. Fits 22 mm or 25 mm diameter tubes.

Key Features:

• Angled Design: 60° tilt built into the base – ideal for sloped deck edges, cabin sides, or transoms where vertical (90°) bases won’t align with the railing.
• Rectangular Flange: Elongated base (about 8 x 4.5 cm) ensures a strong hold and spreads the load. The rectangular shape resists twisting forces better on a slope and often accommodates two mounting screws or bolts.
• Premium Steel: Constructed from AISI 316 stainless steel, offering marine-grade corrosion resistance. The entire piece is mirror polished for a premium look and easy cleaning.
• Tube Fit: Available for Ø22 mm and Ø25 mm tubes – the angled socket is precision-machined to grip the pipe securely at the correct angle. A side grub screw is included to lock the tube in position once installed.
• Applications: Suitable for railing stanchions, grab rails, bimini top braces, or any custom tubing installation at a 60° angle. Provides a stable pivot or attachment point that matches the geometry of your boat.

A plastic end cap for boat rail tubes (available in 22 mm or 25 mm diameter) that protects and finishes off open pipe ends on your vessel.

• Durable black plastic material, UV-stable and crack-resistant
• Standard diameters: 22 mm (7/8") and 25 mm (1") – fits most boat railings and tubing
• Easy to install with a snug push-in fit, no tools required
• Keeps water and debris out of the tube, gives a finished look, and removes sharp edges for improved safety

A plastic connector for Ø22 mm rail tubing, designed to easily and flexibly join boat handrails and guardrails. This adjustable clamp-style base lets you add or modify railings without welding – simply attach it to an existing tube and it securely holds the second tube in place. Made of weather-resistant plastic, it comes in black or white to match your boat’s hardware.

• For Ø22 mm Tubes: Compatible with standard 22 mm diameter stainless tubes commonly used for rails and bimini frames.
• Easy Installation: Two-piece clamp that wraps around the tubes and tightens with screws – no drilling into the boat needed. It can be repositioned or adjusted in height as required.
• Durable Plastic: Constructed from UV-stabilized, impact-resistant polymer that won’t corrode and stands up to marine conditions.
• Fixed 90° Angle: A fixed joint that holds connected tubes at a right angle (perpendicular) – ideal for attaching horizontal railing sections to vertical stanchions.
• Color Options: Available in black or white versions to complement your vessel’s trim and style.

A 60° angled plastic base for mounting a Ø22 mm tube. This bracket allows you to attach railings, canopies, or handles on surfaces where a slanted angle is needed (e.g., boat coaming or console). It’s strong yet lightweight, made from UV-resistant plastic, providing a stable support for tubular structures. Ideal for installing bimini top supports, canvas frame brackets, or grab rails on inflatables and small boats.

• 60° Angle: Pre-angled base holding the tube at a 60-degree angle relative to the mounting surface – perfect for sloped gunwales or consoles.
• Standard Diameter: The socket fits Ø22 mm (7/8") tubes, giving a snug fit for the most common size of stainless tubing.
• Base Dimensions: Compact 91×40 mm footprint with screw holes (typically 2 or 4) – small in size yet distributes load securely.
• Durable Build: Made of reinforced nylon/ABS that won’t corrode; built-in UV protection prevents degradation and yellowing.
• Easy Installation: A lightweight piece that screws or bolts onto the deck or hull. Suitable for DIY installation – a quick way to add an angled tube support.

A plastic base for mounting a Ø22 mm rail tube at a right angle (90°). This compact 74×39 mm bracket serves as a foot/flange to attach the tube to horizontal surfaces (deck, platform) or vertical walls. Made of impact-resistant, weatherproof plastic, the base provides a strong anchor for a railing, canopy frame, or other structure. Suitable for small to mid-sized boats, inflatable boats (with bolt-on hard mounts), and various accessories.

• 90° Angle: Holds the tube perpendicular to the mounting surface – ideal for vertical stanchions on railings, bimini frames, or holders.
• Standard Ø22 mm: Fits 22 mm tubes, which insert easily and can be secured with a set screw through the provided hole.
• Durable Plastic: Marine-grade plastic (nylon) body with UV protection – won’t rust, won’t degrade in sunlight, safe for fresh or saltwater use.
• Easy Installation: Small rectangular base with 2 holes – fastens with screws/bolts to your surface. Its compact size allows installation even on narrow areas.
• Versatile Use: Employed for attaching boat railings, navigation light poles, canvas frame legs, seat braces, and more.