Deck equipment and accessories

AISI 316 stainless steel twisted shackle designed to connect fittings at 90° angles without twisting your lines. This twist shackle (also known as 90-degree D-shackle) is perfect for applications where the attachment points are oriented perpendicular to each other. It provides the strength of a D-shackle with a rotated pin, ensuring smooth alignment and reduced rope wear.

• Material: Marine-grade AISI 316 stainless steel (rust-proof in saltwater)
• Design: 90° twisted design allows perpendicular connections (eye and pin are at right angles)
• Usage: Ideal for sailboat rigging, attaching hardware at different orientations, and preventing line kinks

A practical mosquito net for boat hatches that keeps insects out while allowing fresh air to circulate through the cabin. It is easy to install and remove, made of fine durable mesh with an elastic edging for a snug fit on various hatch sizes. Available in three sizes to fit most common deck hatches.

• Insect Protection: Fine mesh screening blocks mosquitoes, flies, and bugs without restricting cool airflow.
• Easy Installation: Elasticated rim and lightweight design enable quick placement over an open hatch and secure staying in place.
• Universal Fit: Suitable for different hatch models – offered in sizes for small, medium, and larger openings.
• Compact & Lightweight: Folds down for compact storage when not in use and adds minimal weight on board.
• Durable Construction: UV-resistant, marine-grade materials ensure long-lasting use without tearing or degrading.

A high-quality stainless steel connector for joining three tubes at a right angle (90°). Designed for Ø22 mm tubing, this AISI 316 stainless elbow fitting is perfect for building boat railings, bimini frames, or other marine structures. It provides a strong, corrosion-resistant connection with a clean finish.

• Three-Way Connection: Allows three tubes to meet at one 90° junction, forming a T-shaped or corner configuration.
• Marine-Grade Stainless: Crafted from AISI 316 stainless steel – resists saltwater, rust, and weathering, ideal for marine use.
• 22 mm Diameter: Compatible with the common 22 mm boat tubing, ensuring a snug and secure fit.
• Durable & Reliable: Solid construction and precise casting deliver stability under load and vibration.
• Easy Installation: Features built-in set screws/pins (or holes for them) for quick fastening of tubes without special tools.

Install this polished stainless steel rod holder flush into your boat’s deck or gunwale for a sleek, permanent rod station. Made from AISI 316 stainless, it provides a strong 265mm long holder tube for trolling or rod storage:

• Flush Mount Design: Sits nearly flat in deck/gunwale – unobtrusive and safe underfoot
• Marine AISI 316 Steel: Mirror-polished stainless construction, won’t corrode; heavy-duty for offshore use
• Standard Dimensions: 42mm inner diameter, ~265mm tube length fits most rod butts and grips securely
• Secure & Sealed: Integrated flange with gasket for leak resistance; closed-bottom or drain fitting to channel water away

A versatile marine-grade U-bolt made of stainless steel, supplied with two backing plates to distribute load. Ideal for various onboard applications – securing rigging, equipment, rails, or ropes. Available in multiple sizes (lengths from 80 mm to 155 mm) with different rod diameters, allowing you to choose the right strength for the job.

• AISI 316 Stainless: Superior corrosion resistance in saltwater; perfect for marine use without rusting.
• Two Included Plates: Enable through-bolt mounting with support on both sides – add stability and protect the deck/mounting surface from compression.
• Range of Sizes: Models available with different bolt lengths and thread diameters (M5 up to M12) to handle light or heavy loads.
• Secure Fastening: U-shape wraps around pipes, bars, or cables, ensuring reliable hold even under vibration or shock loads.
• Universal Use: Serves as a tie-down point (pad eye), engine/trailer mounting, attachment for safety lines, antenna or bimini supports, and more.

): A stainless steel hasp & staple latch suitable for securing boat hatches, lockers, and cabinets. Compact, strong, and corrosion-resistant, this latch provides reliable closure and allows for a padlock to be added for extra security.

• Made of mirror-polished stainless steel (AISI 316) for maximum rust resistance
• Compact size (74 mm length x 27 mm width) – perfect for small hatches and compartments
• Robust construction stands up to vibration and shocks in marine conditions
• Padlock hole included – enables use of a padlock for added security
• Easy to install with screws (pre-drilled holes for flush mounting)

Round boat inspection hatches made of UV-resistant white plastic, available in three sizes – 4 inch, 6 inch, and 8 inch. Designed for easy access to compartments, tanks, or consoles, these hatches provide a watertight seal and secure closure. Suitable for installation on decks, transoms, or other flat surfaces. 

• Three sizes – 4″ diameter (cut-out ~101 mm), 6″ (~152 mm), and 8″ (~203 mm) to fit various onboard access needs
• Durable material – impact-resistant, UV-stabilized ASA/ABS plastic that retains color and integrity under sun and saltwater exposure
• Watertight closure – lid with rubber O-ring gasket to prevent water ingress into the compartment
• Easy installation – screw-down flange with pre-drilled holes; low-profile design that won’t snag and can be walked on safely
• Convenient opening – textured non-slip lid surface and indented grip (or key slot) for quick twist-open and close by hand

A high-quality rectangular deck hatch featuring a sturdy aluminum frame and clear tempered glass. It provides light and ventilation to the cabin while remaining watertight and durable. Equipped with a support arm for the open position and a secure locking mechanism. Available in three sizes to suit different boats (small, medium, large).

• Aluminum Frame: Lightweight yet strong anodized aluminum frame ensures corrosion resistance and a tight seal to the deck.
• Tempered Glass: The window is made of tempered glass (or thick acrylic) – impact-resistant, UV-stable, and scratch-resistant, allowing natural light in.
• Opening Design: The hatch opens easily via built-in handles; includes a support arm/stay to hold the lid open for ventilation.
• Watertight: Features a full-perimeter rubber gasket that prevents water ingress when closed, even in waves and rain.
• Three Sizes: Offered in cut-out sizes 176×230 mm, 211×211 mm, 260×260 mm (internal) – fitting various deck openings.

Secure your connections with our European Type Large D Shackle, crafted from premium AISI 316 stainless steel. This shackle is designed for durability and reliability in demanding marine and industrial environments. Features a long body design for easier attachment and a secure screw-pin closure.

• Material: AISI 316 stainless steel (marine-grade, corrosion resistant)
• Design: Extended “long” body for increased reach and easy connectivity
• Usage: Perfect for anchor chains, mooring lines, and general heavy-duty marine rigging

Our high-quality removable fishing rod holder combines convenience and marine-grade durability for avid boat anglers. Crafted from premium AISI 316 stainless steel, it boasts excellent corrosion resistance in saltwater environments. The holder’s tube has an internal diameter of 42 mm, comfortably fitting most fishing rods – from light spinning setups to heavier trolling gear – and its exterior is polished to a mirror shine, adding a touch of style to your boat while making it easy to clean.

• Removable Design: Two-piece rod holder allows you to detach the 42mm tube from its base when not in use for easy storage and a clear deck.
• Premium Stainless Steel: Made of marine-grade AISI 316 stainless steel, with a mirror-polished finish for superior corrosion resistance and a sleek look.
• Surface-Mount Base: Fixed-angle base mounts on your boat’s deck or gunwale, providing a stable holder for your fishing rod. Simply insert the rod holder tube into the base – no complex locking mechanism, just a secure friction fit for quick release.
• Versatile Use: 42 mm inner diameter fits most rod handles (spinning, casting, trolling). Ideal for adding rod holding capability to boats, RIBs, or docks – perfect for fishing, trolling, or storing a rod while at anchor.