Flush Mount Fishing Rod Holder – Polished AISI 316 Stainless (Built-In 265mm)

This flush mount rod holder is a professional-grade fixture that adds both functionality and a clean look to your boat. When installed, the only visible part is the sleek oval/round flange and the top of the rod tube, which sits flush (or nearly flush) with the mounting surface. This design eliminates any protruding parts on deck that could stub toes or snag lines, making it a safe choice for active fishing decks. Crafted from AISI 316 stainless steel, it’s built to withstand the rigors of marine use – from crashing waves over the bow to the constant wet/dry cycles that lesser metals can’t handle. The mirror-polished flange not only looks great but also makes it easy to wipe clean.

With a tube length of approximately 265mm (about 10.5 inches), this holder provides deep support for your rod. The inner diameter of about 42mm accommodates standard rod butts, including those with gimbal butts if the holder has a cross-pin at the bottom. Many flush rod holders come with a pin across the bottom interior to index rods with gimbal butts, preventing the rod from spinning – a useful feature when using trolling rods. If your rod doesn’t have a gimbal, the pin also serves as a bottom stop for the rod handle. The bottom end of the tube can either be closed or fitted with a hose barb (drain fitting). Our model typically includes a drain option: you can attach a hose to channel any water that enters the rod holder away to the bilge or overboard, which keeps your storage areas dry (especially important if mounting on the gunwale where waves might splash in, or in a horizontal position where rain could collect).

Installation requires cutting a hole in the chosen mounting location. This holder usually needs a hole saw cut of roughly the tube’s diameter (plus clearance), and three or four screws to secure the flange. It comes with a rubber gasket that sits under the flange to create a waterproof seal against the deck. Once installed, the holder becomes a permanent and very sturdy part of your boat. It’s capable of withstanding heavy loads, such as the leverage from a large fish strike or the weight of a big rod and reel bouncing in chop.

Usage: Flush mount rod holders are a staple on fishing boats for a reason. They are perfect for trolling, as they hold rods at a consistent angle (commonly angled outward at 15°, 30°, or 45° depending on model – this particular model is likely a moderate angle to combine versatility for both trolling and storage). They are also great for bottom fishing, keeping rods secure while waiting for a bite. When not actively fishing, many boaters use them to store dock hooks, deck brushes, or even an umbrella or grill post – they are versatile receptacles. Given their sleek profile, you can install multiple flush holders around your boat (gunwale, transom top, bow area) without cluttering the look.

Our polished stainless flush holder not only serves a practical role but also adds value and style to your vessel. The gleaming flange on the gunwale gives a hint of serious fishing capability. Maintenance is minimal: occasionally check the mounting screws for tightness and ensure the drain hose (if used) remains clear. A quick rinse after exposure to salt will keep it shining and salt-crystal free.

In terms of recommendations, flush holders like this are generally suggested for boats of medium to large size (since you need some depth/space beneath the mounting surface for the tube). If mounting on a small boat, check that there’s at least 265mm of clearance below (no fuel lines or wiring in the way). Because this unit is built to high standards, it’s suitable for offshore sportfishing boats targeting big game – it will hold up under the stress of that kind of fishing.

By installing this flush mount rod holder, you create a reliable and permanent rod station on your boat that’s always ready for action. It’s the kind of upgrade that both anglers and boat enthusiasts appreciate for its mix of durability, elegance, and usefulness.