Fenders

A flexible protective rub rail made of premium EPDM rubber, designed to shield boat hulls and RIB tubes from abrasions and impacts. This P-section rubbing strake is highly resistant to UV, saltwater, and wear, absorbing shocks during docking and guarding your inflatable or fiberglass surfaces from damage. Price is per meter.

• Durable EPDM Rubber: Marine-grade synthetic rubber remains elastic from -40°C to +120°C and resists UV rays and ozone degradation.
• Impact cushioning: P-shaped profile (13.5 mm height) acts as a buffer against docks, pilings, and other boats, protecting inflatable tubes and hull sides from knocks.
• Broad coverage: 34.1 mm wide strip (2 mm thick) covers a large area for maximum protection without adding significant weight.
• Cut-to-length convenience: Supplied in rolls (e.g., 24 m), allowing you to cut the exact lengths needed for your boat or yacht.
• Long-lasting guard: Won’t age, crack, or deform from salt, sun, or weather – keeps your vessel looking new by preventing scuffs, scratches, and wear marks.

A 60 mm black EPDM strip designed to reinforce and protect boat keels, seams, and hull surfaces. This flexible rubber tape withstands weather, saltwater, and UV exposure, preventing mechanical damage from abrasion and impact. Price is per meter.

• Reinforcement profile: Ideal for bonding along keel lines or vulnerable areas – shields against wear from beaching and guards hull seams from impact stress.
• Premium EPDM: Synthetic rubber that stays flexible in extreme temperatures, won’t crack or deteriorate under sun or ozone exposure.
• Easy application: Glues on with marine adhesive to PVC/Hypalon or fiberglass; the 2 mm thin strip conforms smoothly to contours without wrinkling.
• Custom length: Supplied in rolls (e.g., 24 m) – cut to size to cover entire sections or specific high-wear spots as needed.
• Long-term protection: Safeguards your boat from chafing, scrapes, and leaks along joints, extending the hull’s lifespan and maintaining its pristine look.

PVC rub rail profile 30x45 mm designed for protecting the sides of hard-hull boats (fiberglass, aluminum, etc.). This rub rail forms a tough buffer around the boat’s perimeter to absorb impacts from docks, pilings, and other vessels. It is weather-resistant and impact-resistant, available in black (other colors optional), and is installed using a separate mounting track. Key features:

• Profile Size: 30 mm height x 45 mm width – a sturdy profile suitable for medium-sized boats
• Material: High-strength PVC – won’t crack and remains flexible in hot and cold climates
• Installation: Requires a mounting rail/base (sold separately) to be screwed to the hull; the PVC rub rail then snaps over it for a clean finish
• Protection: Cushions blows and abrasions on the hull; shields the paint/gelcoat when docking or bumping into objects
• Options: Available in black as standard; white or grey color options possible to match your boat’s design

Stainless steel bow guard (1.5 mm thick polished INOX) designed to shield your boat’s bow from scratches and impact when hauling the anchor or coming into contact with docks. Available in multiple sizes (small, medium, large) to fit various hull shapes and boat sizes. This highly polished protector defends the bow’s gelcoat or paint from damage and adds an elegant stainless steel accent to your boat. Key features:

• Material: Polished marine-grade stainless steel – fully corrosion-resistant in saltwater environments
• Thickness: 1.5 mm – thin enough to conform to the bow’s curve yet strong enough to absorb impacts
• Sizes (options): Comes in three size options (different length and width) – suitable for small, mid-sized, and larger boats
• Installation: Can be affixed with marine adhesive (for a clean, drill-free install) or with flush screws/rivets (depending on user preference)
• Protection: Safeguards the bow stem when raising the anchor or if the chain swings; prevents chips and cracks in the bow area and stops water intrusion into hull laminates

PVC end caps for rub rail profiles measuring 76.5 x 36.7 x 50 mm (height). Available in white and black to provide a neat and functional finish to the boat’s rub rail installation. These end caps close off the open ends of the rub rail, preventing water ingress and giving a clean, finished look to the hull. Key features:

• Size & Compatibility: 76.5 mm length x 36.7 mm width x 50 mm height – fits rub rail profiles approximately 50 mm tall (common medium/large rail systems)
• Colors: White (for light-colored rails/hulls) or Black (for dark-colored rails/hulls) – choose based on your boat’s color scheme
• Material: Durable UV-resistant PVC – resists cracking and withstands impact and weather exposure
• Installation: Attaches at the end of the rub rail (typically by press-fit and a small retaining screw or adhesive) to hold it securely in place
• Function: Prevents the rub rail from peeling or fraying at the ends; covers sharp edges for safety and improved aesthetics

Set of stainless steel end caps for finishing boat rub rail profiles of approximately 40 mm or 50 mm in height. These high-grade polished stainless caps provide a luxurious finish to your rub rail and offer superior durability compared to plastic end pieces. The set includes two caps (port and starboard) to fully equip both ends of your boat’s rub rail. Key features:

• Models/Sizes: Two versions – small cap (60 x 47 x 19 mm) fits ~40 mm profiles; large cap (73 x 57 x 25 mm) fits ~50 mm profiles
• Material: Marine 316 stainless steel with mirror polish – resists corrosion, UV, and impact
• Contents: Each set includes 2 caps (typically one left and one right) for symmetrical installation on both sides of the boat’s transom
• Installation: Attach to the rub rail ends using countersunk screws or rivets (pre-drilled holes provided); applying sealant is recommended for a watertight fit
• Advantages: Far stronger and longer-lasting than plastic caps; adds a stylish look – the polished steel complements other metal hardware on your boat

PVC end caps for one-piece rub rail measuring 142 x 37.5 x 49 mm. Offered in white and black, these caps are made for the larger rub rail profiles found on RIBs and other boats. The extended length (142 mm) base covers and protects the profile’s end even on larger cross-sections. Ensures a finished look and robust protection at the transom. Key features:

• Dimensions: 142 mm length x 37.5 mm width x 49 mm height – fits one-piece rub rail profile ~49 mm tall
• Colors: Available in black or white – choose to match your rub rail or hull color
• Material: High-quality PVC plastic – impact-resistant, saltwater-proof, and UV-stable
• Installation: Slides over the rub rail end; can be secured with a screw through a built-in hole or glued in place for a cleaner appearance
• Use Case: Designed for RIBs and hard boats with factory one-piece rub rails – protects the rail ends from tearing or damage, and makes it easier to attach covers/ropes at the stern

PVC rub rail profile for inflatable boats with 24 mm height, designed to reinforce and protect the sides of your inflatable’s tube. Made of flexible PVC, this profile guards against impacts and abrasion during boat-to-boat contact or docking. It prevents water from seeping into the tube seams and doubles as a track for attaching canvas clips and accessories. Available in black, dark grey, or light grey, as well as two base width options (75 mm or 95 mm) to suit your needs. Key features:

• Profile Size: 24 mm height; offered with base widths of ~75 mm or ~95 mm for different coverage levels
• Material: Soft PVC (flexible and shock-absorbing) – gentle on inflatable tubes; UV-stabilized to resist fading
• Purpose: Shields the sides of inflatable boats, RIBs, and tenders from scratches, bumps, and chafe
• Extra Function: Stops water from tracking into the tube seams; allows mounting of canopy clips, covers, or lines along the side
• Installation: Glued onto the boat’s fabric (PVC or Hypalon) using appropriate adhesive; the profile is flexible to follow the tube’s curvature

Flexible PVC rub rail with a 30x14 mm profile, designed to shield the hull of small boats from bumps and scrapes during docking. Ideal for boats ~3–5 m.

• Durable PVC construction: UV-resistant and marine-grade for long-lasting use.
• Easy installation: Mounts using an aluminum or PVC track (sold separately) for secure attachment to the hull.
• Flexible design: Conforms to hull curves; ideal for boats approximately 3–5 m in length.
• Reliable protection: Cushions impacts and prevents damage to the boat’s gelcoat and paint.

Durable PVC rub rail with a 35x28 mm profile provides extra protection for medium-sized boats (~5–7 m). The taller, wider profile absorbs heavier impacts, and the two-tone design (black base with a white stripe) gives a modern, high-contrast look.

• Reinforced build: Larger cross-section handles strong impacts and protects the hull in rough seas or collisions.
• Premium material: UV-stable PVC for long-term use in saltwater without cracking or fading.
• Easy installation: Mounts directly to the hull or on a T-shaped aluminum rail (for added strength), with fasteners hidden for a clean finish.
• For 5–7 m boats: Ideal for fishing, leisure, and RIB boats in the mid-size range that need tougher gunwale protection.