Sea-Line S2 Extra Shine Hologram Remover – Finishing Polish for Swirl-Free Mirror Shine

Sea-Line S2 Extra Shine Hologram Remover is a top-tier finishing polish that represents the final step toward a perfect shine on any boat surface. S2 is universal for all types of finish coats and is specifically formulated to tackle their unique challenges – eliminating micro-scratches, “spider web” swirls, and hologram effects left after previous polishing stages. Using S2 in the final step ensures the surface will have a mirror-like gloss with no visible defects, along with an exceptionally smooth feel. The compound contains high-quality minerals with an extremely fine grit that polish gently yet effectively – the result is a finish with deep wet shine and no circular marks even under direct sunlight.

In use, S2 Extra Shine stands out for its pleasant workability: it doesn’t throw dust or splatter; the optimized balance of abrasives to binder keeps the compound sufficiently wet for extended polishing without drying into powder that could scratch or soil adjacent areas. Any residue after polishing is easy to wipe off with a microfiber cloth, leaving the surface absolutely clean. The compound is silicone-free, which is a crucial advantage – it doesn’t temporarily fill scratches, so you see the true result of your polishing, and it also means it’s safe for repainting or bonding with no contamination issues. S2 is especially recommended for dark colors, where the standards for a flawless finish are highest – it can impart depth and clarity to dark blue, black, or other intense colors without any remaining micro-marring.

• Applications: Use Sea-Line S2 Extra Shine as the final step in polishing gelcoat or paint, after working with heavier compounds (such as S0, S1 or S07). S2 will bring out the maximum gloss and remove any traces left by the prior compounds. It is particularly valuable when polishing dark hulls and parts, where even minor holograms are noticeable – S2 ensures the finish is optically clean. The compound is also suitable for refreshing a surface that is already shiny but has developed light swirls over time – a single pass with S2 can return it to a showroom gloss. After polishing with S2, it’s recommended to apply a protective sealant (like S4 wax or S5 spray) to preserve the achieved result.
• Usage Instructions: Apply a small amount of S2 polish onto a soft polishing pad (e.g., lambswool or fine foam). Use a rotary polisher with adjustable speed – start at low RPM (~800–1000) to spread the polish evenly over the work area, then gradually increase speed up to about 1800–2000 RPM until the surface reaches full gloss. With S2, during the final polishing passes, reduce the pressure and RPM to “jewel” the finish – make the last passes with light pressure and low speed (not exceeding 2000 RPM) to ensure a flawless result. Once you’re done, wipe away any polish residue with a clean microfiber cloth. You’ll reveal a surface with an outstanding shine and absolutely no optical defects. Now is the perfect time to apply a protective wax, such as S4 or S5, to seal in that result.