Sea-Line Cleaner Degreaser – Surface Cleaner and Degreaser Before Painting

Sea-Line Cleaner is an indispensable product for the final stage of surface preparation before painting, priming, or laminating. This degreaser is a blend of organic solvents specifically selected to dissolve and remove a variety of contaminants that could compromise coating adhesion and quality. Oily films, wax or silicone residues, salt deposits – all are dangerous to a good finish as they can cause defects (e.g., small circular craters known as “fisheyes”) in the paint. Sea-Line Cleaner effectively eliminates these impurities, leaving the surface clean and dry, ready for paint or resin application.

• Usage – Two-Towel Method: For best results, each area should be washed at least twice. First, apply a thin layer of cleaner to a manageable section (e.g., 2ft x 2ft / 50×50 cm) – you can spray it on or wet a clean, lint-free cloth with the cleaner and wipe it on. While the surface is still wet, immediately wipe it with the first cloth, absorbing and lifting off the contaminants; do not let the cleaner evaporate before wiping – this is critical. Then promptly dry the same area with a second clean, dry cloth, removing any remaining solvent and dissolved grime. Inspect the dry cloth – if you see any dirt or grease on it, reapply the cleaner and repeat the process with fresh cloths until the second cloth comes away completely clean. Work in sections like this until the entire surface is perfectly clean. Use new clean cloths frequently so you aren’t redepositing oil back onto the surface.
• Benefits & Properties: Sea-Line Cleaner is formulated with a controlled evaporation rate. This means the degreaser doesn’t evaporate too quickly (giving you time to dissolve and wipe away dirt) but also doesn’t linger excessively (so as not to slow down the workflow). This balance allows for maximum cleaning efficiency. The product is suitable for metal surfaces (steel, aluminum), fiberglass/gelcoat, and plastics commonly used in boat building. It leaves no residue – the surface will be completely dry and grease-free, ready for the next steps. Using this cleaner greatly reduces the chance of paint flaws such as craters, fisheyes, or poor paint flow. Even microscopic traces of silicone or oil can ruin the finish of new paint; hence, Sea-Line Cleaner is considered a must-use product before any painting or refinishing. Regular use prior to repairs and coatings ensures long-lasting adhesion and an ideal appearance of the finish.
• Tips for Safe and Effective Use: Work in a well-ventilated area or outdoors, as the solvent fumes are flammable and should not be inhaled in high concentration. Wear solvent-resistant gloves and safety glasses to avoid contact with skin and eyes. Do not substitute universal thinners or acetone in place of this specialized Cleaner – even if they seem similar, they may evaporate too fast or leave invisible residues. (For example, acetone flashes off so quickly that dirt often remains on the surface instead of being wiped away.) Sea-Line Cleaner is specifically formulated for this purpose and yields optimal results. After cleaning, allow a few minutes for any remaining solvent to fully evaporate before starting to paint or apply coatings. Ensure that the surface is not touched with bare hands after degreasing – oils from your skin can also compromise adhesion. By using Sea-Line Cleaner correctly, you will achieve a professionally clean surface and the perfect foundation for any protective or decorative coating.