ROKK Hidden Wireless Charger (Flush Mount, 10W, Waterproof)

The ROKK wireless charger offers a cutting-edge solution for charging mobile devices on board without dealing with cords. Hidden installation means the charger module is mounted underneath a surface (wood, fiberglass, or plastic of a thickness specified by the manufacturer), and on the top side there are virtually no protruding parts – only a slim rubber ring or mark indicating the charging spot. Simply place your smartphone (or other Qi-enabled device) on that spot, and the charger will automatically begin charging it inductively at up to 10W (fast charging, compatible with modern iPhones, Samsungs, etc.). The unit is IPX6 waterproof, which means it is protected against powerful water jets – no problem to have it in the cockpit, on an open dash at the helm, or in wet rooms. Even in rain or spray, the internal electronics are hermetically sealed. The charger runs on either 12V or 24V DC input, so it can hook up directly to the vessel’s electrical system. For added safety, it has built-in protection against surges and excessive current, as well as overheating. Installation is relatively straightforward: you’ll need to cut a hole as per the instructions (for the recessed part) and secure the module from below (usually with screws), ensuring a gasket is in place for watertightness. On the top surface, a pad/ring is adhered or fitted, which acts both as a locator and a non-slip surface – it prevents the phone from sliding due to boat motion or waves. ROKK Wireless is a product line by Scanstrut, proven for quality in the marine industry, so you can count on its reliability and performance. With this charger, your phone will always be at hand and powered – for example, while using navigation apps, without the risk of the battery dying during long voyages.

• Benefits of Hidden Mount: Keeps surfaces smooth and free of clutter – ideal for modern yachts and boats with clean designs. There are no exposed elements to get damaged or corroded
• Ease of Use: No more hunting for a cable on board – just set your phone down in the designated spot and it begins charging. Waves and heeling won’t easily dislodge it thanks to the non-slip pad
• Usage Scenarios: Install the charger on the helm console so your phone (running charts or music) stays charged in view; or in the saloon table – so guests can charge their devices simply by leaving them on the table
• Compatibility: Qi standard ensures it works with most smartphones that support wireless charging. For phones with cases: it charges through most non-metallic cases (up to a certain thickness ~3-5mm). Check the instructions for maximum surface thickness and material (wood, plastic) for optimal performance