Rubber Mooring Line Snubber 6–22 mm – Shock Absorber for Dock Lines

This high-quality rubber mooring snubber is an essential accessory for smooth and safe docking. It absorbs dynamic shock loads caused by waves, wind gusts, and boat movement, protecting your lines and deck fittings from sudden stress. Made from UV-stabilized marine-grade rubber, the snubber remains elastic and effective even after prolonged exposure to sun and saltwater. Easy to use, it installs directly onto your mooring or dock line – simply loop the rope through the snubber’s openings as instructed. No extra hardware or tools are required. Once in place, it immediately begins to cushion the tension on the line, making it ideal for both permanent berthing and temporary dockings in rough conditions. By adding snubbers to your mooring lines, you extend the lifespan of the ropes, safeguard your boat’s cleats and anchoring points, and gain peace of mind in all weather conditions during mooring.

Recommended Usage & Available Sizes:

• Small Size (Code 03345-1) – Fits rope diameter 6–12 mm. Best for small boats and runabouts up to about 4–5 m in length. Provides optimal shock absorption for lighter vessels and calm to moderate conditions.
• Medium Size (Code 03345-2) – Fits rope diameter 14–18 mm. Recommended for mid-sized boats, yachts, and cruisers up to around 10 m long. Absorbs stronger jolts for heavier vessels and more challenging conditions.
• Large Size (Code 03345-3) – Fits rope diameter 20–22 mm. Ideal for large yachts and ships up to ~15 m in length. Delivers maximum protection when mooring bigger vessels or in very rough seas.

Regardless of size, using a snubber on each mooring line is highly advised for extended stays at the dock or when facing choppy waters. This will shield your boat from sudden jolts, reduce noise and wear on lines, and ensure you dock with confidence and security every time.