Quicksilver Gen III Fuel Filter Assembly for MerCruiser (2004–2015) – #892687A02

Keep your MerCruiser engine running at its best with the Quicksilver 892687A02 fuel filter kit, specifically made for models with the Gen III Cool Fuel system. From 2004 onward, many MerCruiser V6 and V8 MPI engines (e.g., 4.3L, 5.0L, 5.7L, 6.2L) came equipped with the Gen III “Cool Fuel” module that cools the fuel and uses this special water-separating filter. Quicksilver 892687A02 is the direct replacement cartridge for the original filter, ready to restore your fuel system’s factory performance. The kit comes with everything needed for the swap – a new filter element already housed in a new cartridge (cup) plus upper and lower seals. The new O-rings ensure a tight fit with no leaks after installation. This filter separates water from gasoline and catches any debris, protecting the engine from issues such as vapor lock, fuel starvation at high RPM, or clogged injectors. If your boat has a MerCruiser sterndrive or inboard engine (model years 2004–2015), replacing this Gen III fuel filter once a year or roughly every 100 hours is a must-do maintenance task. It will prevent unexpected power loss and ensure your engine runs smoothly under all conditions.

• Fitment: It’s a perfect fit for all MerCruiser engines using the Gen III Cool Fuel system – commonly found on MPI models in popular boats like Sea Ray, Bayliner, Crownline, and others in the mid-2000s. Check your engine’s service manual – if it lists filter 892687A02 or the superseding 8M0101609, this is the correct kit for your engine.
• Why It’s Needed: For powerful gasoline V8 engines (5.7L, 6.2L, 8.1L) that operate under heavy loads, clean fuel is critical. This filter helps prevent “lean” fuel conditions due to dirty fuel, which could lead to piston overheating. By using this filter, you’re safeguarding your engine at high speeds – important for towing water skiers, rapid cruising, or any high-demand use.
• Practical Benefit: The built-in water sensor (blue float) means your boat’s system will alert you (via light or buzzer, depending on your setup) if water accumulates in the filter. This gives you a chance to drain the filter or replace it before water reaches the engine – a major advantage for preventing costly repairs and ensuring safety.
• Easy Replacement: The kit is engineered for quick service – simply relieve fuel pressure, unscrew the filter cap, remove the old cartridge, and insert the new one with the provided seals. No special tools are required aside from a filter wrench for the cap. The whole process takes only minutes, and you’ll immediately benefit from smoother engine performance afterward.
• OEM Reliability: Using a genuine Quicksilver filter guarantees that the materials (such as the seals and plastic bowl) are compatible with gasoline and additives and won’t degrade or react. This is crucial to avoid leaks under high pressure and temperature. Steer clear of cheap knock-offs to preserve your warranty and peace of mind on the water.