The Solas Amita 3 stainless 15x17 propeller is engineered to maximize thrust at takeoff and help your boat plane as quickly as possible. As the front (lead) prop in a duo-prop setup, it pairs with a rear prop to deliver a powerful push and superior control. The 17-inch pitch is on the lower side, allowing the engine to reach higher RPMs on launch – a big advantage for heavy hulls, additional load, or watersports (such as towing tubes or skiers). The durable stainless steel construction ensures the prop maintains its performance even under prolonged use and high stress.
Application & Recommendations: This prop is an ideal choice for boats around 24–30 feet (7–9 m) or those with higher displacement that need extra thrust to get on plane quickly. The Solas Amita 3 15x17 (C4 set) is commonly paired with Volvo Penta DuoProp drives and mid-range engines (around 200 HP) where strong acceleration is prioritized over absolute top speed. Tip: Use this front prop together with the matching 13.25x17 rear prop (right-hand) as a complete set – both propellers are designed to work in tandem for optimal performance. If later you wish to increase top speed at the expense of some acceleration, Solas also offers higher pitch options (19″ and 21″) corresponding to the C5 and C6 sets.
Features:
- 3-blade 17″ pitch front prop – provides greater pulling power; well-suited for loaded boats that need a “power” prop for takeoff
- DuoProp Synergy: Part of a twin counter-rotating prop set for Volvo Penta – this is the front left prop, which pairs with a rear right prop. The combination virtually eliminates cavitation and prop slip during sharp turns or heavy loads
- Reduced Slip, Quick Planing: The lower pitch means the prop moves a shorter distance through water per revolution, allowing the engine to spin up faster into its power band. The result is less strain on the engine and more efficient acceleration from standstill
- Rugged Build: Solas uses precision-cast stainless steel – the blades are thin yet extremely strong, improving speed potential and impact resistance (against floating debris, etc.)
- Volvo Penta Compatible: Fits the Volvo Penta sterndrive spline shaft (27 splines). Equivalent to OEM Volvo Penta C4 propeller (e.g., Volvo part 854834). Installs easily with existing hardware (prop nut, tab washer, cone) – a straightforward swap for your original prop
-
Engine Brand:Volvo Penta
-
Propeller material:INOX
-
Blades:3 blades
-
Rotation:Dual
-
Mounting, Tooth Spline:27
-
Diameter:15" // 38.1 cm
-
Pitch:17" // 43.18 cm




