Solas Amita 4 Aluminum 4-Blade Propeller 11.1x11 for Suzuki 35-65 HP

The Solas Amita 4 11.1x11 is designed to get the most out of your Suzuki 35-65 HP motor, especially if your boat is relatively light or you’re seeking extra speed. With an 11″ pitch, this four-blade prop allows your engine to run at lower RPMs at cruising speed and achieve a higher top speed at wide-open throttle. This can result in better fuel economy and less engine strain in the long run.

Despite the higher pitch, the Amita 4 11.1x11 retains the hallmark advantages of a four-blade design – excellent pulling power out of the hole and superb maneuverability. The boat accelerates smoothly without prop ventilation, and at high speeds the handling stays stable and precise. If you’ve been running a prop with a smaller pitch (e.g., 9″ or 10″) and found your engine hitting the rev limiter too easily, moving up to an 11″ pitch can optimize its performance and increase your speed.

Recommended Applications:

• Light & Fast Vessels: Perfect for fast boats ~4–5 meters, RIBs with lightweight hulls, or any setup where, say, a 60 HP engine can push the boat beyond recommended RPM with a lower-pitch prop. With this propeller, you’ll bring those RPMs down and convert that excess power into forward speed.
• Prevent Over-Revving: For owners who find that with a current 9″ or 10″ prop their engine hits the RPM limiter, an 11″ pitch is the logical next step. It will load the engine slightly more, keeping it in the optimal rev range, which protects against over-revving and improves overall efficiency.
• Smooth Cruising: At cruising speeds, a higher pitch means lower RPM for the same boat speed. This often translates to a quieter, more economical operation – an important factor on longer cruises or fishing trips where you spend hours on the water.
• Quality & Durability: Like all Solas propellers, the Amita 4 11.1x11 is built from high-grade aluminum with an integrated rubber hub to absorb shocks and vibrations. It can withstand minor impacts with underwater debris, offering some protection to your drivetrain. Its coating shields against corrosion, so you can use it in freshwater lakes or saltwater bays with confidence.
• Compatibility & Installation: Intended for Suzuki and other brands (Johnson/Evinrude) with 13-spline shafts in the 35-65 HP range. Installation is straightforward – simply replace your old prop with the Solas Amita 4 11.1x11, using the same thrust washers and cotter pins (if applicable). You’ll be up and running with improved performance in no time.