Marine 4-Gang Rocker Switch Panel with Breakers (4-Switch Electrical Panel)

This marine 4-gang electrical panel combines functionality and safety by providing centralized control of four different electrical devices on board, each with its own circuit protection. The panel comes pre-assembled – the four rocker switches (ON/OFF type) are factory-wired to their respective built-in circuit breakers and common power buses. This greatly simplifies installation: you only need to run the main power feed (+12/24 V and ground) to the panel and connect the outputs to your respective devices.

Features:

• Integrated Breakers: The panel features four resettable thermal circuit breakers, mounted directly next to each switch. The rated values – two at 5 A, one at 10 A, and one at 15 A – are chosen to cover typical circuits:
  • 5 A: suitable for navigation lights, gauges, cabin lights, or small pumps
  • 10 A: suitable for a medium load circuit like courtesy/deck lights, electronics, or a stereo system
  • 15 A: suitable for a bilge pump, a small refrigerator, or a spotlight
• If a circuit exceeds these currents, the corresponding breaker will “trip” (its button will pop out), cutting power and protecting the circuit from damage. Once you address the issue, simply press the button back in to reset the breaker – no need to replace fuses.
• Water Resistance & Sturdiness: The front face of the panel is designed for the marine environment – UV-resistant (won’t fade or crack from sun exposure) and sealed around the switches and breakers. The breakers have rubber boot covers to shield them from water ingress, and the switches have internal gaskets making the mechanism splash-proof. The panel front is rated IP65, sufficient to withstand rain, spray, and the occasional wave splash on deck.
• LED Backlit Switches: Each rocker switch has a built-in LED indicator that illuminates when the switch is in the ON position. This allows you to easily see which circuits are active in the dark or at night. The LED indicators are colored (commonly red), which is easy on night vision and immediately draws attention to any active circuit on the panel.
• Customization: The kit includes a set of labels/decals with various icons and text for common applications – e.g., “Bilge Pump”, “Anchor Light”, “Cabin Lights”, “Accessories”, etc. You can apply the appropriate label above or below each switch in the designated area, so your panel is clearly labeled and user-friendly for anyone on board.
• Easy Installation: Physically, installation requires cutting a rectangular hole approximately (around 120×95 mm) and drilling four corner holes for the mounting screws. All necessary stainless steel mounting screws are provided. The rear of the panel is relatively shallow, allowing installation even in tighter consoles or bulkheads. The internal wiring (including a common ground bus) is pre-arranged, saving time and ensuring the components are correctly connected. A wiring diagram is included to clearly show which wire corresponds to which output circuit. It’s recommended to connect your devices using appropriately gauged wires for the current (for example, ~16 AWG for 10–15 A circuits) to ensure safe operation.

With this 4-gang marine switch panel, you get a professional-looking and functional all-in-one solution for controlling your onboard systems. There is no need to build each circuit and fuse separately – the panel does it for you in an elegant way. This improves your boat’s reliability and safety: if something overloads (short circuit or a faulty device), the breaker reacts instantly. Control is centralized – you can see at a glance which circuits are on, and you can reset a breaker or turn off a device with a simple press. It’s an ideal solution for small to mid-sized boats where space is at a premium, but high functionality and safety are required from the electrical system.