Socket – Plastic, Waterproof, 30A

The 30A “New Edge” inlet offers a modern look and enhanced functionality for your yacht. Its low profile means only a thin outline is visible on the deck – with no bulky covers sticking out that could be hit or get in the way. The white color is chosen to blend with typical boat finishes and to avoid heating up under the sun. Although entirely plastic, the inlet is designed to be extremely durable: the housing is reinforced and pressure-resistant, and the lid is tested for thousands of open/close cycles. A key feature is its ability to work with 16A plugs – this is achieved through an internal design that allows a smaller diameter plug to properly engage the pins (via an optional adapter ring or built-in compatibility in the shape). For owners, this means flexibility: if you visit a marina where only 16A service is available, your inlet can accommodate it via an adapter without needing a different receptacle. The IP56 protection of the “New Edge” series covers typical deck conditions – stormy rain, salt spray in rough seas, washing down with a hose. This makes the inlet suitable for mounting on both vertical surfaces and horizontal decks (with a recommendation to place it in well-drained areas).

• Versatility: The “New Edge” 30A socket is an excellent choice for refitting an older boat or as a factory upgrade on a new one – it gives a contemporary appearance and can replace standard round inlets without major modifications. If your boat sometimes uses a generator or shore supply at 16A, this inlet can handle both, simplifying your system and reducing the number of required inlets.
• Enhanced Safety: While IP56 is a step below IP67, the inlet provides reliable protection for most real-world scenarios. One advantage of a slightly “breathable” design is the avoidance of condensation – air can slightly circulate when no plug is inserted, preventing moisture build-up inside. When a plug is connected, the mechanical design ensures the lid stays tucked away securely, so no one will trip on it, and water is directed away from the opening.
• Aesthetics & Ergonomics: Hidden screws and smooth curves – the inlet is meant to be unobtrusive. This is especially valuable for sailboats, where deck hardware should be as low-profile as possible to avoid fouling sails or lines. Ergonomically, the lid has a subtle finger tab that makes it easy to open, yet it doesn’t protrude excessively.
• Usage Tips: During installation or rewiring, always clearly mark which wire goes to which terminal – the “New Edge” module has labels, but when you remove it, ensure you put it back in the correct orientation (it’s usually keyed, but just in case). After installation, test with both a 30A plug and a 16A plug (via adapter) to confirm that connections engage smoothly. Periodically clean the lip of the lid and the gasket of dust and salt so it always closes tightly.