Electrical equipment
Water System and Pumps
Mooring Equipment and Anchors
Trailer parts
Oars, covers, and biminis
Accessories for inflatable boats
Steering systems and cables
Parts and consumables for engines
Fuel tanks and fuel line
Marine paints, varnishes and preparations
Sonar, Navigation and Radio Equipment
Interior equipment and comfort
Deck equipment and accessories
Life-saving and signaling equipment
Watersports equipment (7)
Inflatable boats
Fiberglass boats
Outboard engines
Electric engines
90° Stainless Steel Rail Elbow Joint – AISI 316 (25 mm)
Designed for heavy-duty railing needs, this 90° stainless steel elbow joint connects 25 mm (1 inch) tubing to form strong right-angle corners on your boat. Made from premium marine-grade AISI 316 stainless steel, it withstands the toughest conditions – saltwater, UV exposure, and constant stress – without corroding or weakening. This fitting is ideal for larger boats and yachts with 25 mm rail systems, allowing you to construct or refit corner sections of bow and stern railings, as well as other structural frames.
The elbow is built to handle the higher loads typically encountered on big vessels. It secures 25 mm rails using heavy-duty set screws or bolts that lock the tubing in place. Once installed, the joint forms a rigid 90° angle that will not wobble or loosen, ensuring that the guardrail or frame remains firm even under significant stress (for example, when people lean on it or during rough weather).
Use Cases and Recommendations:
- Ideal for yachts, flybridge cruisers, and large motorboats that use 25 mm rail tubes for railing structures and require especially strong corner joints.
- Use it for the corners of bow rails (pulpits) or stern rails (pushpits) on vessels where railing strength is critical for safety.
- Suitable for the frames of bimini tops and hardtops that require 1" tubing elbows, as well as for building radar arches or watersport towers.
- Recommended for vessels around 7 meters and above, where 25 mm rails are common – this elbow ensures the railing joints withstand wave impacts and active use by crew and passengers.
- Installation is straightforward: slide the fitting onto the two tube ends forming the corner and tighten the stainless set screws with the appropriate Allen key (for high-vibration areas, applying a thread-locker can provide extra security).
By choosing this marine 25 mm elbow connector, you ensure longevity and safety for your yacht’s railing system. Your guardrails will remain solid and shiny, matching the high quality of your boat’s hardware, and passengers can move around the deck safely thanks to the robust corner joints.
