Base for Removable Anchor Light – Chrome-Plated Zinc, 12° Angled

The removable light base 01264-CZ12 is designed to provide a secure mounting point for detachable marine navigation lights on your boat. Crafted from a high-strength zinc alloy with a chromium plated finish, this base offers both durability and a sleek appearance. The chrome plating not only gives it a mirror-like shine that matches other yacht hardware, but also protects the metal from saltwater corrosion. This ensures a long service life even in harsh marine conditions, without rust or degradation of the electrical contacts.

A standout feature of this model is the built-in 12° tilt. Many boat surfaces (for instance, cabin tops, windscreen frames, or foredecks) are slightly inclined. If you mount a light base directly on such surfaces, a standard light pole would lean at an angle, preventing the light from being truly vertical. This product solves that problem – its top is engineered as a wedge, so when installed on an angled surface it automatically levels your light pole upright. The result is a vertically oriented light that shines correctly and is visible as intended in all required directions. This is important for meeting COLREG regulations regarding light sectors, and it greatly improves the detectability of your vessel.

Additionally, the base comes with a handy flip-up cap. When you remove your portable light (for example, during daytime or when trailering the boat), you simply rotate the cap to cover the socket. This keeps the internal electrical contacts and socket protected from rain, waves, dirt, and physical damage. It significantly extends the lifespan of the unit by keeping the connections dry and clean, always ready for the next use. The cap is hinged to the base, so you won’t misplace it and it locks shut to avoid rattling.

Installation and compatibility of the 01264-CZ12 base are straightforward. The base is designed to receive standard light poles of about 19 mm diameter, which typically use a 2-pin plug for power. This covers most removable anchor and masthead lights on the market, making the product very versatile – it can work with a wide range of light models (including those from EVAL, Osculati, etc.). The built-in socket is two-pole and provides a reliable 12V connection to power your lamp. The base has pre-drilled holes for screws, allowing firm attachment to fiberglass, wood, or metal surfaces. It’s recommended to use a bedding compound or gasket under the flange during installation to ensure a watertight seal on deck.

Usage & Recommendations:

• This chromed base is ideal for small and mid-sized boats that use detachable mast lights. For example, if you have a fishing boat, yacht, or RIB up to ~10–12 m without a permanently mounted anchor light, you can install this base at a convenient location (on the wheelhouse roof, radar arch, or foredeck). When you need the light – insert the pole into the base; when you don’t – remove it, and the base stays low-profile and unobtrusive.
• Mounting on angled surfaces: Thanks to the 12-degree built-in angle, this base is highly recommended for installations on sloped areas – e.g., on a cabin top that has camber for water runoff, or an inclined bow deck. The internal wedge design will set your pole light straight up without the need for shims or guesswork.
• Strength & security: Unlike all-plastic bases, the chrome-zinc base withstands greater loads and shocks. If you frequently insert and remove the light pole, the metal socket will maintain its threads and contacts longer. This makes the product suitable for rougher use and for boats subject to vibration and dynamic forces (high-speed craft or offshore use).
• Compatible lights: The 01264-CZ12 base works with a wide array of 360° lights – from standard incandescent poles to modern LED light masts, as long as the diameter and plug type match. The manufacturer (EVAL) specifically pairs this base with their removable all-round light (code EV716149), but in practice it can accommodate any similar light. This broad compatibility means you can upgrade your light later without changing the base.
• If you need a lighter-duty option: In cases where weight is critical or budget is tighter, Five Marine also offers a plastic base (code 01263-P16) with a 16° angle. The plastic base is inherently corrosion-proof and lighter. However, for maximum toughness, a premium look, and long-term service, the chrome-plated zinc base 01264-CZ12 remains the superior choice.

With this chrome base, your removable navigation light will always be securely mounted and correctly oriented. The 01264-CZ12 base combines professional-grade quality and functionality that will contribute to higher safety and convenience on board – an advantage that will help you outshine competing solutions on the market which may be less optimized.