Repair Service Kit for Toilet 01430 (Models 2008 & Newer)

This service kit for toilet 01430 (post-2008) contains everything required for a complete rebuild of the pumping mechanism and seals. The newer manual toilet models produced from 2008 onward introduced an improved “Twist & Lock” system to secure the plunger and prevent flooding. Our kit is specifically designed to service these models – every part inside is updated to match the manufacturer Jabsco’s improvements.

By using this kit, you will replace every major part subject to wear: from the O-rings and gaskets to the piston rod itself and the air vacuum breaker. This means after the refit, your toilet will be virtually brand new – the handle will move freely, the necessary vacuum for flushing will be generated, and the annoying leaks around the pump will be gone for good.

The 01430-10 service kit is also ideal if you’ve acquired a used boat with an existing toilet – rather than risking old seals, you can proactively swap everything out and start “fresh” with a renewed system.

Usage and Recommendations:

• Compatibility: This kit is intended for EVAL/Jabsco manual toilets model 01430 manufactured after 2008 (corresponding Jabsco part code 29045-3000). For earlier models (1998–2007), use the alternate kit 01430-1.
• When to Use: It’s recommended to use the full kit when you observe multiple issues – for example, the pump is hard to operate, there are leaks in various spots, and flushing performance has dropped. One overhaul with this kit addresses all problems at once.
• Long Voyages: If you’re embarking on a long journey or circumnavigation, carry this kit on board. It allows a complete repair in case of a malfunction without needing to source individual parts while at sea.
• Preventative Maintenance: Even if your toilet is functioning normally, performing a full rebuild approximately every 5 years with a service kit like this is good practice. It prevents unexpected failures and keeps the sanitation system in top condition.