Easterner

High-strength sliding bracket for a secondary outboard engine, made of AISI 316 stainless steel. Allows vertical movement of the motor (raise/lower ~70 cm) with multiple lockable positions and a safety strap. A wooden pad (25 x 20 cm) provides a stable mounting surface for engines up to 15 HP (60 kg). Ideal for boats that require adjustable auxiliary motor depth or need to retract the kicker when not in use.

• Capacity: engines up to 15 HP / 60 kg (suitable for 9.9–15 HP four-strokes)
• Material: 316 stainless steel (marine grade) – heavy-duty construction with robust slide rails and fasteners
• Sliding mechanism: Teflon rollers for smooth travel; automatic locks at each position
• Safety: includes a strong strap to secure the motor to the bracket, preventing vibration or bounce

Adjustable transom bracket for a secondary outboard made of stainless steel, available in two versions – standard (L=60.5 cm travel) and extended (L=90 cm travel). Suitable for engines up to 15 HP (60 kg). Equipped with automatic locks, a safety strap, and a wooden motor pad (13 x 20 cm). Allows choosing a shorter or longer vertical range depending on transom height.

• Two models: 02311 (60.5 cm slide travel for standard transoms) / 02311-90 (90 cm slide travel for tall transoms)
• Capacity: up to 15 HP / 60 kg – for both sizes
• Construction: 316 stainless steel rails and hardware; Teflon sliders for smooth movement
• Use case: for boats ~4–7 m; select model based on transom or platform height requirements

A complete fuel filter/water separator with a plastic mounting head and replaceable 10-micron cartridge. It delivers high-grade filtration for gasoline or diesel – removing water and fine particles to protect your engine. With a flow rate of 182–404 L/h, this filter suits a wide range of marine engines. The kit includes 10 mm hose fittings and a spare filter element for convenience.

• 10-micron fuel/water separator – captures rust, sediment, and separates water
• Lightweight, durable plastic head for easy onboard installation
• Flow rate up to ~404 L/h – suitable for single or twin mid-to-high power engines
• Clear bowl (optional) or sight indicator – lets you monitor filter condition
• Includes standard 10 mm barbs and a replacement filter cartridge for convenience

Genuine replacement kit consisting of a clear bowl and filter element for the fuel water separator filter code 01836-1 (Mercury/Yamaha). This kit allows quick replacement of the entire lower part of the filter – an ideal solution when the filter is heavily contaminated or the bowl is damaged. Includes a transparent cup with built-in 10-micron filter and a gasket for a tight seal.

• Spare lower unit for separator 01836-1 – clear bowl + filter element
• 10 micron filter element integrated in the cap, ready to install
• Restores filter efficiency – swap out the old contaminated part for a new one
• Easy installation: unscrew the old bowl, attach the new one with the provided seal
• OEM quality by EVAL – guaranteed compatibility and reliability

A 10 µm replaceable filter element compatible with Yamaha/Mercury gasoline fuel separators (codes 01836-1, 01866-1, etc.). This spare cartridge restores the filter’s ability to remove water and contaminants without replacing the entire bowl. Easy to install and essential for regular maintenance.

• Genuine 10 micron spare filter for Mercury/Yamaha separators
• Fits models 01836-1, 01866-1, 01836-2, 01866-2 (Eval) – direct replacement
• Removes fine particles and water, protecting your engine from contaminated fuel
• Quick installation: remove old element, insert new one with seal
• Ensures your fuel separator filter performs at peak efficiency

A 10-micron fuel-water separator filter for gasoline that removes water and fine debris to protect your engine. Suitable for outboard motors over 15 HP and standard Ø10 mm fuel hoses. Key features:

• Efficient 10-micron filtration to trap water, rust, and contaminants
• Durable filter assembly with replaceable element (spare element code 03601-1) for easy maintenance
• Clear collection bowl (spare bowl code 03601-3) to monitor separated water and sediment
• Shields your boat’s fuel system and extends engine life in harsh marine environments

A compact fuel filter-separator designed for small outboard engines up to 15 HP. Reusable design – the filter element can be cleaned and reused. Fits Ø8 mm fuel lines. Key features:

• Separates water and debris from gasoline, protecting small engines from damage
• Washable filter element – no replacements needed, simply clean periodically
• Lightweight, durable housing ideal for tight spaces in small boats and inflatables
• Easy inspection and service – transparent section to monitor contamination buildup

A specialized PVC base designed to attach a fishing rod holder (model 03258) onto an inflatable boat. It provides a stable, waterproof bond to the boat’s tube, allowing you to mount a rod holder without drilling through the material.

• High-quality PVC pad – flexible and resistant to UV rays and saltwater
• Fits rod holder model 03258 – secure interface for attaching the rod holder
• Glue-on installation on PVC tubes – reliable mount with no drilling or screws
• Enhances inflatable boat fishing – add a rod holder quickly and conveniently

A universal boat seat base with both sliding and swiveling capabilities, made of anodized aluminum. It allows fore-and-aft seat adjustment and 360° rotation with lock, providing flexibility and convenience in seat positioning. The compact design (338×182×70 mm) fits a variety of seat models and pedestals.

• Combined function: integrated slide track + rotating platform with swivel lock mechanism.
• Dimensions: 338×182×70 mm – low-profile, robust base suitable for various applications (helm seats, bar stools, etc.).
• Material: anodized aluminum (marine-grade) for corrosion resistance, with steel components for strength.
• Installation: universal – mounts between the seat and deck or pedestal; standard bolt hole pattern for broad compatibility.

A swiveling mechanism for a boat seat that allows 360° rotation of the chair. A standard steel swivel plate measuring 15×15 cm, it installs between the seat and its base to provide smooth turning. Extremely durable with a corrosion-resistant coating for marine use.

• Size: 150×150 mm – universal design with four mounting holes (fits most seats and pedestals).
• Rotation: 360° free rotation of the seat for flexible orientation.
• Sturdy build: steel construction with corrosion-resistant finish (galvanized or painted) to prevent rust.
• Installation: easy – 4 bolts to the seat, 4 bolts to the pedestal or deck; low-profile design adds minimal height.