EVAL

A robust rail guide with a swiveling roller, designed to guide ropes or loads being pulled at an angle. This compact (18 cm) metal assembly withstands working loads up to 200 kg and is perfect for mounting on trailers or decks where the pull line is off-center. The pivoting roller automatically aligns with the direction of force, ensuring smooth boat loading onto a trailer or hauling heavy gear without binding or chafing.

• Short track (18 cm) with a movable carriage – allows ~10–15° off-axis pulling without snagging or jamming the rope
• Swivel-mounted steel roller – follows the pull direction, providing smooth feed and reduced friction for loads up to 200 kg
• Heavy-duty metal construction (stainless steel) – impact and corrosion resistant, suitable for use in wet/salty environments and demanding conditions
• Built-in locking handle (spring pin) – secures the sliding carriage when needed and enables easy release for adjustment or removal
• Recommended uses: boat trailers, ramps, and davits – ideal for safely guiding a boat onto a trailer when it’s slightly off-line, as well as redirecting tensioned lines on deck without strain

The plastic strap bridge is a strong, durable loop designed for securing webbing straps to boat covers and canopies. Made of UV-resistant nylon, it won’t corrode and withstands marine conditions. It comes in two sizes to fit different strap widths, providing a secure anchor point for cover tie-downs during transport or storage.

• Material: High-strength plastic (nylon) construction, UV-stable and saltwater-proof
• Sizes: Small bridge (27 mm inner width) fits straps up to ~25 mm; Large bridge (40 mm inner width) fits straps ~40 mm wide
• Installation: Easily mounts with screws or rivets to the boat hull, frame, or canvas as needed
• Use Cases: Ideal for boat canopies, bimini tops, covers, and cargo straps – keeps webbing tight and in place
• Advantages: Will not rust, lightweight with smooth edges (prevents strap chafe and wear)

The EVAL console cover shields your boat’s helm (wheel, instruments, electronics) from rain, dust, and UV damage. Made of tough 300D polyester with a waterproof PU coating, it features reinforced double stitching and an integrated drawstring hem for a snug fit. Available in 4 different sizes to suit a range of boats – from compact RIBs to larger center-console vessels.

• Material: 300 Denier polyester fabric with waterproof PU coating; built to withstand sun and seawater
• Design: Elastic cord perimeter + drawstring fastening – cinches tight around the console for secure fit
• Seams: Double-stitched seams with extra reinforcement/taping to endure strong wind without tearing
• Protection: UV-resistant treatment prevents sun damage and fading; keeps console dry and dirt-free in all weather
• Sizes: 4 sizes (S, M, L, XL) – fitting most boats (approx. 3 m up to 7 m). Choose the right size based on your console’s height and width.

A spare paddle blade for Ø30 mm oar shafts, measuring 60 x 12.5 cm, designed for standard oars on medium-sized boats. This sturdy plastic blade restores your oar if it breaks or wears out, maintaining the same rowing efficiency. Compatible with Ø30 mm handles (aluminum or wood) and engineered for quick, secure installation.

• Ø30 mm Socket: Fits oars with 30 mm diameter – commonly used on medium inflatable boats, rowboats, and canoes.
• Optimal Size: The 60 x 12.5 cm blade provides an excellent balance of power and ease of rowing for boats around 3–4 m.
• Durable Plastic: Material resists impacts, flexing, and UV rays; keeps its shape even with prolonged use.
• Swap in Minutes: Intuitive installation – slide onto the handle and secure with a bolt; no special tools required.
• Practical Spare Unit: Indispensable as a backup part in your boat kit – compact and lightweight yet a lifesaver in an emergency.

The Ø5 mm plastic snap stud base is part of a marine canvas fastener system (snap buttons for boat covers). This piece acts as the male stud mounted on a hard surface (hull, fiberglass, frame) to which the canvas attaches via a snap. Made of impact-resistant plastic, it will not corrode and comes in white or black to blend with your boat’s trim.

• Function: Male snap stud (base) for press-stud fasteners – secures covers, curtains, cushions by snapping together with the female part
• Installation: Mount with a flat-head screw (Ø4.8–5.5 mm); 5 mm inner diameter accommodates standard screws flush
• Material: Tough engineering plastic (UV-stabilized) – non-corrosive and marine-grade for saltwater use
• Colors: White or black – choose to match your boat or canvas color, with no rust stains over time
• Advantages: Lightweight, no sharp edges; securely holds the snap under vibration and high winds, won’t scratch surfaces

A SOLAS-approved LED lifejacket light that automatically activates and flashes when immersed, greatly increasing the visibility of a person in the water at night. It features a 5-year life lithium battery and provides bright flashing illumination for over 8 hours continuously. Compact and easy to attach to any lifejacket, this light is a vital life-saving device in emergencies at sea.

• Automatic water activation via built-in sensor (no manual action needed upon immersion)
• Bright white LED strobe light, highly visible to rescuers in darkness
• Over 8 hours continuous operation – exceeds SOLAS minimum requirements
• Long-life lithium battery with 5-year shelf life (no battery replacement during service life)
• Manual off switch for battery conservation and manual on for testing or non-water activation
• SOLAS/MED approved – mandatory on commercial vessels, strongly recommended on all lifejackets and immersion suits