EVAL

The Ø5 mm plastic washer is a small yet important accessory for installing boat covers and hardware. It spreads the load of a screw head over a larger area, protecting fabric or surfaces from chafing and tear-out. Made of durable plastic, this washer will not corrode and fits screws with ~5 mm shank diameter (e.g. 4.8–5.5 mm). Available in white and black.

• Size: 5 mm inner diameter (fits standard #8–#10 screws); outer diameter ~12 mm to effectively distribute pressure
• Material: Tough UV-resistant plastic – withstands outdoor conditions without cracking or degrading
• Purpose: Acts as a spacer and reinforcing washer when fastening canvas, tarpaulins, covers, etc., with screws
• Usage: Place under the screw head (especially with countersunk/flat heads) to ensure even clamping and prevent direct metal-to-fabric contact
• Advantage: Lightweight, non-metallic washer – no rust or metal reaction; maintains a clean look and increases the strength of the assembly

A nylon protective pad for deck cleats – prevents deck damage and galvanic corrosion when installing cleats. It fits between the cleat and the surface, providing better sealing and load distribution.

• Tough engineering nylon material, UV-resistant and impervious to moisture and temperature changes
• Isolates the metal cleat from the deck (protects gelcoat/teak and reduces galvanic corrosion between dissimilar metals)
• Shields the deck finish from scratches and dents under strain from mooring lines
• Available in sizes to fit ~120 mm, ~150 mm, and ~200 mm cleats (small, medium, large)
• Easy to install – contoured to match the cleat’s base and bolt pattern for a snug fit

A spring-loaded stainless steel push button latch for locking and releasing hatches, doors, and cabinets. With a single press, it secures your lid, and with another press it releases – a convenient, low-profile catch designed for marine use.

• Made of premium 316 stainless steel – resists rust and corrosion in saltwater environments
• Flush, low-profile design – sits flat with the surface, no protrusions or snag points
• Easy one-handed operation – push to lock, push again to unlock instantly
• Compatible with deck hatches, inspection panels, cabin cabinets, or even RV/camper doors
• Robust spring mechanism – withstands vibrations and frequent use, ensuring long-lasting performance

Premium inspection hatch cover made of mirror-polished stainless steel 316, providing a dependable watertight seal for your boat. Ideal for accessing fuel tanks, compartments, and service areas on board.

• 100% Watertight Seal: A built-in rubber O-ring ensures an airtight, leak-proof closure to keep water out.
• Marine-Grade Stainless 316: Mirror-polished INOX 316 construction for superior corrosion resistance and long-lasting shine.
• Easy Open & Clean: User-friendly screw design with a self-cleaning thread prevents grit build-up, allowing smooth opening/closing and longevity.

High-capacity 90-degree deck drain designed for cockpits and decks. Features a sturdy stainless steel 316 drain grate and a durable nylon elbow connector, providing efficient water drainage (50.8 mm opening) from deck to hose.

• Heavy-duty cockpit scupper with a 316 stainless steel slotted grate for maximum water flow and corrosion resistance.
• 90° nylon elbow on the underside for easy hose attachment, directing water away without kinking hoses.
• Large 50.8 mm (2") drain opening efficiently clears water from decks during heavy rain or splashing.
• Combines the strength of stainless steel on the surface with lightweight, corrosion-proof nylon below deck.
• Ideal for self-draining cockpits, deck shower drains, or any area needing rapid drainage to keep your boat safe and dry.

B : 75 mm

C : 27 mm

D : 51 mm

E : 75 mm

The Ø17 mm snap fastener kit provides a top and bottom piece to secure boat covers, canvas, and cushions. Made of brass with a chrome-plated finish, these snaps combine corrosion resistance with an attractive shine. The 17 mm cap diameter ensures a firm grip and easy snap-on/snap-off operation. They install by crimping or pressing onto the fabric and are compatible with standard bases/studs (e.g. plastic or metal pins).

• Contents: Female part (cap) + male part (stud) for one complete snap; forms a full fastening set
• Material: Solid brass with electroplated chrome finish – 100% corrosion-proof in marine conditions
• Size: 17 mm head diameter (standard large size for marine canvas) – easy to snap even with gloves on
• Strength: Holds canvas securely; spring-lock design prevents accidental unfastening under tension or vibration
• Application: Ideal for bimini tops, boat covers, spray curtains, enclosures, and any marine canvas that needs reliable fastening to the boat

Foldable stainless steel ladder for easy boat boarding, with a comfortable 30 cm width and sturdy plastic steps. Available in 3-step or 4-step versions (lengths 64 cm and 86 cm) to suit different freeboard heights. Folds compactly for storage, perfect as a swim ladder or primary boarding ladder for small yachts.

• High-grade stainless steel (AISI 316) – corrosion-resistant construction with polished finish.
• Wide 30 cm white polypropylene steps with ribbed anti-slip surface – stable and comfortable on bare feet.
• Foldable design: ladder hinges or flips up, saving space and preventing drag in the water while underway.
• Two options: 3-step (64 cm) for lower freeboards, and 4-step (86 cm) for taller boats – choose the optimal size for your vessel.
• Easy installation on deck or swim platform – mounting hardware/brackets included; ideal as a swim ladder or for boarding at the dock.

Ensure your child's safety on the water with Eval's "Zoo" 100N lifejacket, designed to turn an unconscious user face-up and keep the head above water.

The Eval "Zoo" 100N children's lifejacket series is engineered for maximum safety in various water conditions. Complying with EN ISO 12402-4 standards, it provides a buoyancy of 100 Newtons, suitable for both swimmers and non-swimmers.

Key Features:

• Automatic Face-Up Positioning: Designed to turn an unconscious person face-up, keeping the airway clear.
• High-Visibility Color: Bright orange fabric ensures visibility in emergency situations.
• Reflective Elements: Equipped with SOLAS-approved retro-reflective tapes for enhanced detection.
• Integrated Whistle: Includes a whistle certified under EN ISO 12402-8 for attracting attention.
• Secure Fit: Features a zipper, adjustable belt, and crotch strap to prevent the jacket from riding up.
• Durable Materials: Constructed with materials approved under EN ISO 12402-7 for durability and performance.

Available in multiple sizes to accommodate a range of body weights, ensuring a snug and secure fit for all children.

Standard manual fuel primer bulb for Ø8 mm hoses. Quickly and easily pumps gasoline or diesel to your engine during cold starts or after refueling:

• Universal 8 mm size: fits most outboard motor fuel lines (5/16″)
• Built-in valves: one-way check valves prevent backflow – effectively purges air from the fuel line
• Durable rubber: black rubber bulb body resists fuel and oil; remains flexible over time
• Compact design: approximately ~%~ length, lightweight (~0.07 kg), fits into small compartments
• Perfect for small boats, outboard engines, jet skis – makes starting easy after long storage

Secure your fuel or water systems with our premium Locking Deck Filler, crafted from high-grade AISI316 stainless steel for superior corrosion resistance and durability. Ideal for marine environments, this deck filler features a reliable locking mechanism to prevent unauthorized access and ensure safety. Easy to install and built to last, it provides a secure and professional finish to your boat's deck.

• Lockable stainless steel (AISI 316) deck filler cap suitable for fuel or water tanks, available in 38 mm and 50 mm hose sizes.
• Polished corrosion-resistant construction ensures long life and reliable performance in marine environments.
• Secure screw-cap design with included key protects against fuel theft, spills, and water ingress into the tank.