Five-marine

A male clip with a 2-hole base made of chromed brass, designed for mounting on a solid surface (deck, gunwale, frame). This “foot” style fastener has two screw holes for firmly fixing it to the boat, and a protruding stud onto which a female canvas clip attaches. It provides a strong and stable anchor point for covers, ensuring canvas is held taut against the boat’s structure.

• Base plate with two 5 mm screw holes – standard spacing for easy installation
• Brass construction with chrome finish – weather-resistant for long-term outdoor use
• Mates with clip 03974 (female part) – creates a secure “canvas-to-boat” connection
• Low-profile, rounded design – won’t snag lines and is foot-friendly when stepped on
• Ideal for securing bimini tops, console covers, engine covers, etc., directly to the boat

Install this polished stainless steel rod holder flush into your boat’s deck or gunwale for a sleek, permanent rod station. Made from AISI 316 stainless, it provides a strong 265mm long holder tube for trolling or rod storage:

• Flush Mount Design: Sits nearly flat in deck/gunwale – unobtrusive and safe underfoot
• Marine AISI 316 Steel: Mirror-polished stainless construction, won’t corrode; heavy-duty for offshore use
• Standard Dimensions: 42mm inner diameter, ~265mm tube length fits most rod butts and grips securely
• Secure & Sealed: Integrated flange with gasket for leak resistance; closed-bottom or drain fitting to channel water away

Designed for cabin boats and cruisers, this 600D cover provides maximum stem-to-stern protection – including the cabin superstructure. Keep your cabin boat dry and clean through all seasons with a durable cover that withstands UV rays, rain, snow, and salty sea air.

• Ultra-Tough 600D Marine Fabric – repels water and resists fading, ideal for prolonged outdoor use.
• Extended Cabin Height – a special design that covers the boat’s entire cabin/coach roof, protecting windows, hatches, and electronics.
• Extra Reinforced Seams – critical areas are strengthened to endure tension from wind and water pooling.
• Secure Fastening – comes with strong ropes/straps to tie down under the hull; elasticated panels ensure a tight wrap around the boat.

Round boat inspection hatches made of UV-resistant white plastic, available in three sizes – 4 inch, 6 inch, and 8 inch. Designed for easy access to compartments, tanks, or consoles, these hatches provide a watertight seal and secure closure. Suitable for installation on decks, transoms, or other flat surfaces. 

• Three sizes – 4″ diameter (cut-out ~101 mm), 6″ (~152 mm), and 8″ (~203 mm) to fit various onboard access needs
• Durable material – impact-resistant, UV-stabilized ASA/ABS plastic that retains color and integrity under sun and saltwater exposure
• Watertight closure – lid with rubber O-ring gasket to prevent water ingress into the compartment
• Easy installation – screw-down flange with pre-drilled holes; low-profile design that won’t snag and can be walked on safely
• Convenient opening – textured non-slip lid surface and indented grip (or key slot) for quick twist-open and close by hand

A chromed brass turn-button fastener for canopies, consisting of a base and a rotating tab, which acts as a locking mechanism for canvas. This “common sense” fastener secures the canvas with a quarter-turn – firmly locking a cover in place and preventing accidental release. It mounts with screws to a solid surface and pairs with a grommet or eyelet on the fabric.

• Classic marine twist-lock mechanism – rotate 90° to lock or unlock the canvas
• Made of chrome-plated brass – corrosion-resistant with a strong spring tongue
• Two mounting holes for screws – easy to install on wood, fiberglass, or metal surfaces
• Compatible with snap eyelet 03974 – the canvas stud/grommet engages under the turn tab
• Ideal for canvas doors, hatches, covers – where a more robust latch is needed than a simple snap

Heavy-duty stainless steel swivel shackle for anchor and chain, allowing 360° rotation to prevent chain twisting during anchoring operations. This premium AISI 316 connector ensures a secure link between your anchor and chain, with exceptional corrosion resistance and strength to withstand extreme marine conditions.

• Polished AISI 316 stainless steel construction – maximum corrosion protection
• Swiveling design – allows free rotation of the anchor relative to the chain, eliminating twist
• Reinforced pin and robust build – handles high shock loads and pulling forces
• Available in two sizes: fits Ø6–8 mm chains (for small/medium anchors) and Ø10–12 mm chains (for larger anchors)

Our plastic boat drain plug with base is the ideal solution for efficiently draining water from your boat’s hull, preventing unwanted accumulation. Made of high-quality nylon plastic, it offers long-lasting durability in marine environments and a reliable watertight seal. Perfect for transom installation on small to mid-sized vessels.

• Watertight design with O-ring seal – prevents leaks and water ingress.
• Standard Ø23 mm size fits most boats around 3–5 m (10–16 ft) in length.
• Sturdy base flange made of UV-resistant plastic (nylon) for secure hull mounting.
• Integrated hose connection on inner side to channel water directly overboard.
• Available in white or black to match your boat; spare insert plug available separately for backup.

Our high-quality removable fishing rod holder combines convenience and marine-grade durability for avid boat anglers. Crafted from premium AISI 316 stainless steel, it boasts excellent corrosion resistance in saltwater environments. The holder’s tube has an internal diameter of 42 mm, comfortably fitting most fishing rods – from light spinning setups to heavier trolling gear – and its exterior is polished to a mirror shine, adding a touch of style to your boat while making it easy to clean.

• Removable Design: Two-piece rod holder allows you to detach the 42mm tube from its base when not in use for easy storage and a clear deck.
• Premium Stainless Steel: Made of marine-grade AISI 316 stainless steel, with a mirror-polished finish for superior corrosion resistance and a sleek look.
• Surface-Mount Base: Fixed-angle base mounts on your boat’s deck or gunwale, providing a stable holder for your fishing rod. Simply insert the rod holder tube into the base – no complex locking mechanism, just a secure friction fit for quick release.
• Versatile Use: 42 mm inner diameter fits most rod handles (spinning, casting, trolling). Ideal for adding rod holding capability to boats, RIBs, or docks – perfect for fishing, trolling, or storing a rod while at anchor.

Secure your small outboard motor with our lightweight anodized aluminum bracket. Designed for engines up to 15 HP (40 kg), this bracket offers sturdy support for your auxiliary motor and comes with a durable plastic mounting board available in white or black.

• Supports outboard motors up to 15 HP / 40 kg
• Lightweight anodized aluminum frame with UV-resistant plastic mounting pad (white or black)
• Four adjustable height/tilt positions with spring assist for optimal engine placement

A female canopy clip (socket) made of nickel-plated brass, intended to be attached to canvas. This piece acts as the receiving end of the fastening system – it connects with a male clip or turn-button on the boat. Durable and corrosion-resistant, it holds the fabric securely without tearing or distorting it, even with repeated use.

• Solid brass with nickel plating – excellent resistance to rust and wear
• Sized to fit clips 03997, 03977 and turn fastener 03975 – universally compatible
• Installs on fabric by crimping/riveting – forms a smooth grommet that won’t damage the material
• Strong spring retention – snaps tightly and won’t come undone unintentionally
• Ideal for all types of covers, side curtains, biminis – a standard component for canvas fastening or repairs