Five-marine

Premium AISI 316 stainless steel thru-hull fittings featuring an integrated hose barb (tailpiece) for direct hose connection. Available in common hose sizes 3/8", 1/2", 3/4", and 1", these thru-hulls allow you to run a hose straight to the fitting without needing a separate adapter. Each fitting has a wide flange for the hull exterior and a barb on the interior side to securely clamp your hose. They are ideal for above-waterline drains (scuppers, sink drains, livewell overflow) or any application where a hose needs to pass through a bulkhead or hull with a secure, leak-free connection. Manufactured from marine-grade 316 stainless, they offer superior strength and corrosion resistance compared to plastic fittings.

• Material: AISI 316 stainless steel, one-piece body with barb – rustproof and strong
• Hose Sizes: Comes in 3/8", 1/2", 3/4", 1" barb diameters to fit standard hoses
• Design: Mushroom head outer flange and ribbed hose tail interior for hose clamping
• Application: Direct hose connections for bilge pump discharge, sink or shower drains, livewell/baitwell connections, fuel tank vents (check size), etc.

Effortlessly transport your small boat or dinghy across land with these heavy-duty folding transom wheels. Made of polished AISI 316 stainless steel with large 260 mm wheels, they flip down for launching or up and out of the way while boating. A must-have accessory for easy single-handed launching on ramps, beaches, and marinas.

• Premium Stainless Steel: Constructed from marine-grade AISI 316 stainless steel for maximum strength and corrosion resistance in fresh or salt water.
• Fold-Up Design: Innovative folding mechanism allows wheels to lock down for use or flip up when not needed, avoiding drag in the water.
• Large 260 mm Wheels: Sturdy Ø260 mm rubber wheels provide smooth rolling over sand, gravel, and uneven terrain without bogging down.
• Universal Fit: Adjustable transom mounting brackets fit most inflatable boats, RIBs, and small aluminum or fiberglass dinghies for versatile use.
• One-Person Launch: Enables single-handed launching and retrieval of your boat – no trailer required – saving time and effort at the boat ramp.

Provide a stable support for your boat cover with this lightweight yet sturdy telescopic pole made of anodized aluminum. Its adjustable design lets you set the perfect height to prevent water from pooling on the cover, keeping your boat dry and the cover taut.

• Adjustable Height – available in two models with ranges 60–100 cm or 90–150 cm, accommodating the needs of different boats and cover sizes.
• Anodized Aluminum – lightweight, rustproof material that withstands saltwater and corrosion, ensuring a long service life.
• Wide Base & Cap Tip – a stable base prevents sliding on your boat floor; the top cap fits beneath the cover, distributing pressure evenly.
• Prevents Water Pockets – props your cover up like a tent, so rainwater and snow run off instead of pooling and sagging the cover.

High-quality stainless steel thimble (metal eye) for forming strong, long-lasting loops in rope ends. It protects the rope from chafing and increases the loop’s load capacity. Available in sizes for ropes from 4 mm up to 20 mm diameter:

• AISI 316 Stainless: Maximum corrosion resistance in saltwater – ideal for marine use and any outdoor application
• Robust Construction: Solid bent metal with smooth U-shape – takes the load without cutting into the rope fibers
• Full Size Range: From small thimbles for 4–6 mm ropes (flags, small craft) to large 18–20 mm (mooring, anchor, towing lines for yachts)
• Easy Installation: Inserts into the eye of a rope loop during splicing or knotting – provides a hard reinforcement for shackles, carabiners, and hooks
• Versatile Use: For any rope eye – anchor rodes, dock lines, towing bridles, rigging lines, rope swings and hammocks, industrial slings, and more

A stainless steel mooring spring designed to absorb shocks and vibrations in dock lines. It installs between the boat and dock to provide elastic “cushioning” under wind and wave stress. Available in multiple sizes to match rope thickness and boat size:

• AISI 316 Stainless Material: Marine-grade inox steel – resists rust, salt, and constant tension
• Streamlined Design: Compact coil spring that takes load smoothly and silently – endures thousands of stretch/compression cycles
• Spring Gauges: 6 mm, 7 mm, 9 mm, 10 mm (suitable for boats up to ~8 m, ~10 m, ~12 m, ~14 m respectively)
• Easy Installation: Attaches to the line via shackles or rope loops at both ends – insert between boat and dock without altering your existing lines
• Safer Mooring: Reduces sudden boat movement, protects cleats and lines from extreme strain, and increases onboard comfort while moored

Innovative dual-axis swivel connector for anchor and chain, made of 316 stainless steel. Combines a 360° rotating swivel and a hinged folding link, allowing the anchor to self-align correctly on retrieval while eliminating chain twist. Ensures safer, smoother seating of the anchor on the bow roller.

• Premium AISI 316 stainless steel – resists corrosion and impact
• 360° rotation + 180° pivot – anchor always aligns properly without twisting
• High load capacity – built for heavy anchors and strong pulling forces
• Two sizes available: fits Ø6–8 mm chains and Ø10–12 mm chains (compatible with most anchor types)

Looking to mount a heavier auxiliary outboard? Our stainless steel motor bracket with a wooden pad is built to handle engines up to 15 HP (60 kg) with ease, offering a reliable secondary motor mounting solution. Crafted from premium AISI 316 stainless steel, it combines strength, corrosion resistance, and a classic design.

• Supports outboard motors up to 15 HP / 60 kg
• Heavy-duty AISI 316 stainless steel frame with marine-grade wooden pad
• Spring-assisted adjustable bracket with multiple positions for optimal motor trim and height

Enhance your boat's helm with this 340 mm (13.4") stainless steel steering wheel, featuring five polished spokes for durability and a sleek appearance. Crafted from AISI 316 marine-grade stainless steel, it offers exceptional resistance to corrosion, making it ideal for both freshwater and saltwater environments.​

• 340 mm (13.5") diameter steering wheel made entirely of polished marine-grade AISI 316 stainless steel.
• Classic 5-spoke design for a timeless look and reliable performance; includes a stainless center cap for a finished appearance.
• Fits standard 3/4" tapered steering shafts; durable and corrosion-resistant, ideal for yachts, cruisers, and center-console boats.

This steering wheel combines functionality with style, making it an ideal choice for boat owners seeking reliability and comfort.​

Sturdy bow anchor roller made of stainless steel, 300mm long, ensuring safe guiding of the anchor during launch and retrieval. Ideal for boats using anchors up to ~10kg, protecting the bow from impact and chafing.

• High-quality marine grade AISI316 stainless steel construction (corrosion-resistant)
• 300mm length, base approx 80×80mm – suited for anchors up to about 10kg
• Provides smooth, snag-free feeding of anchor chain and rope
• Shields the boat’s bow from damage during anchoring operations

Replacement plastic roller (sheave) for bow anchor roller assemblies. Ideal for swapping out a worn or broken wheel – restores smooth chain and rope movement. Sturdy construction with a metal insert for extended lifespan.

• Diameter Ø37.5mm, width 32mm – a standard size fitting many anchor rollers
• Made of reinforced plastic (black) resistant to UV and seawater exposure
• Built-in metal bushing – protects the wheel and pin from abrasion and wear
• Easy to install in place of the old wheel – quickly returns your anchor roller to full functionality