Electrical Equipment

Complete marine 4-switch rocker panel, each equipped with a built-in circuit breaker. Allows easy control of up to four onboard electrical devices – e.g. lights, pumps, navigation electronics – with integrated overload protection (breakers 2×5A, 1×10A, 1×15A). The panel is made of durable plastic, water-resistant, and includes labels for each switch.

• Configuration: 4 ON/OFF rocker switches with LED indicators + 4 resettable breakers – 2×5 A, 1×10 A, 1×15 A
• Material: UV-resistant plastic panel (134×112 mm), stainless steel hardware, rubber breaker caps for waterproofing
• Voltage: For 12/24 V DC systems; ideal for boats, yachts, RVs
• Installation: Easy surface mount – pre-wired panel; requires cutout and 4 mounting screws (included)
• Safety: Integrated circuit breakers protect each circuit – will trip on overload and can be reset with a push

High-quality marine rocker switch with 4 pins and built-in LED illumination – available in various switching configurations. These switches are waterproof (IP67), shock-resistant, and equipped with a colored LED indicator to show status. Suitable for boat panels, ATVs, RVs, etc., the series covers 5 function types:

• ON-ON (double throw switch): Two stable positions to toggle between two circuits or devices
• (ON)-ON (momentary + maintained): One direction is spring-loaded – ideal for horns or momentary functions
• ON-OFF-ON (three positions): Center off, up and down on – for controlling two modes (e.g., navigation lights or 2-speed fans)
• (ON)-OFF-ON (momentary + off + maintained): Combo for special uses like wipers (momentary spray, steady wipe)
• (ON)-OFF-(ON) (double momentary): Both directions momentary (spring return) – perfect for bi-directional motion, e.g., engine trim or winch in/out

Flexible plastic corrugated conduit (pre-slit along its length) for protecting and organizing electrical cables on boats, yachts, and vehicles. Made of high-quality polypropylene, this loom shields wires from abrasion, moisture, and chemicals, while its split design makes it easy to insert or remove cables without disconnecting them.

Price is for 10 meter package.

• Durable Protection: Safeguards cables against chafing, UV rays, oil, and fuel exposure, extending their lifespan
• Flexible Yet Sturdy: Corrugated structure is highly flexible for easy routing but holds its shape without kinking
• Wide Temperature Range: Reliably performs from -30°C to +100°C, suitable for engine bays and deck installations
• Easy Installation: Longitudinal slit allows quick insertion of cables without needing to undo existing connections
• Multiple Sizes Available: Offered in diameters from 4 mm up to 55 mm (outer diameter), covering needs from single thin wires to large harness bundles

A lightweight yet sturdy plastic base (tray) for securely mounting a battery in a boat, car, or RV. Available in two sizes – 28 cm and 33 cm length (approx. 17.7 cm width) – to accommodate batteries of different footprints. It ensures stability and prevents the battery from shifting during travel or rough seas, thereby extending system life and safety.

• Durable PVC construction – resists corrosion, battery acid and fuel vapors; excellent for marine conditions.
• Secure hold – includes a buckle strap to firmly tie down the battery to the tray.
• Easy installation – pre-drilled holes for screws/bolts to attach the tray to a floor or deck.
• Two sizes – internal dimensions ~28×17.7 cm and ~33×17.7 cm, covering the most common 12V battery sizes (Group 24, 27, etc.).
• Universal use – suitable for cars, boats, solar setups; keeps the battery steady even under vibration or tilt.

The Waterproof Switch Panels are designed to provide reliable control over your boat's electrical systems. Available in 4 and 6 switch configurations, these panels are constructed from anodized aluminum, ensuring durability and resistance to harsh marine environments. Each switch is equipped with LED indicators for easy status monitoring and integrated automatic fuses for safety.

Key Features:

• Material: Anodized aluminum for corrosion resistance
• Switches: 4 or 6 switches with LED indicators
• Fuses: Integrated automatic fuses for each circuit
• Voltage: 12V DC
• Current Rating: 16A per switch
• Dimensions:
• 4-switch panel: 115 x 130 x 70 mm
• 6-switch panel: 115 x 190 x 70 mm

EN: Heavy-duty marine toggle switch with a brass body and chrome-plated lever, designed for various onboard applications. Features silver-plated contacts for reliable conductivity and a long threaded neck for easy panel mounting. Available in multiple versions labeled for specific functions (navigation lights, bilge pump, wiper, etc.), each with intuitive engraved symbols on the knob.

Professional insulated female 6.3mm Faston terminals with built-in heat shrink insulation, providing strong, vibration-resistant, and waterproof electrical connections. Ideal for marine and automotive applications, these spade terminals allow quick connect/disconnect to standard 6.3mm blades (e.g. switches, fuse blocks, devices) while protecting against corrosion and wire pull-out.

• Fully Insulated: Entire connector is covered by heat-shrink tubing – once heated, the connection is sealed against water, salt, and moisture
• High Quality: Copper terminal with tin plating for excellent conductivity and corrosion resistance, even in salty environments
• Color Coded: Red (for 0.5–1.5 mm² wires), Blue (1.5–2.5 mm²), Yellow (4–6 mm²) – easy selection based on wire size
• Secure Connection: Strong crimp grip plus post-crimp heat shrink ensures a vibration-proof hold that won’t loosen
• Universally Compatible: Standard 6.3 x 0.8 mm female spade fits all common male blade tabs (auto/marine standard size)

This remote panel allows full monitoring and control of your Sterling Pro Charge Ultra battery charger from a convenient location – perfect for mounting at the helm or in the cabin. Featuring a clear LED/LCD display, the panel shows real-time charging voltage, current, the selected battery type, charger/battery temperature, and any error messages. With the included 10-meter cable, you have the flexibility to install it wherever you need for easy viewing. Three mounting options (surface, flush, or semi-flush) let it seamlessly integrate into any dashboard.

• Remote Monitoring: Keep an eye on your battery charging without going below deck – voltage (V) and current (A) are continuously displayed, along with charge status (bulk, absorption, float).
• Full Control: Use the remote to adjust settings such as charging mode or battery profile, activate “night mode” for silent charging, or turn the charger on/off as needed – all from a distance.
• Alarms & Indicators: In case of any issue (overheat, sensor fault, etc.), the panel displays error codes or warnings – enabling you to respond quickly to any charger or battery problems.
• Easy Installation: Panel size is about 110 x 68 mm – compact yet easy to read. A 10 m cable (extendable if necessary) with plug-and-play connectors is included – simply connect it to the charger. The panel can be surface-mounted or flush-mounted for a clean look on your console.
• Added Convenience: Ideal for larger boats and yachts – monitor your battery status from the salon or helm, without needing to access the charger in the engine room every time.

A high-quality stainless steel battery mount that provides maximum durability and corrosion protection. Its universal design fits all standard battery sizes, ensuring a secure hold and long service life even in the harshest conditions. Ideal for yachts, boats, and professional applications where reliability is paramount.

• Marine-grade stainless steel – completely rust-proof in salty and humid environments.
• Universal fit – adjustable/flexible construction accommodates various batteries (small and large 12V units).
• Secure mounting – solid frame holds the battery firmly; can be used with a strap/clamp for even tighter fixation.
• Exceptional durability – metal tray withstands vibrations, high temperatures, and heavy loads without bending.
• Professional look – gives a clean, finished appearance to the installation; preferred in high-end yachts and equipment setups.

White dual USB charging socket for panel mounting, compatible with both 12V and 24V systems. Allows two devices to charge simultaneously at the standard 5V USB output. Ideal for boats, yachts, cars, and RVs, thanks to its durable construction and protective cap that keeps water out.

• Dual USB Ports: Charge 2 devices at once (smartphones, tablets, GPS, etc.)
• Wide Voltage Range: 12/24V DC input, 5V output (total up to 2.1A)
• Waterproof Cap: Sealing rubber cap shields the ports from water, dust, and salt spray
• Rugged Build: Nylon housing is impact-resistant and UV-stable for long life in marine environments
• Easy Installation: Mounts in a panel with rear nut; an optional faceplate is included for surface mounting if needed