Lighting and Navigation Lights

An ultra-small Osculati recessed LED light (Ø28 mm outer) with a single white LED. Designed for marker and courtesy lighting – perfect for steps, thresholds, coamings, and any spot that needs a subtle indicator. Extremely low consumption (0.24 W) and a warm white output (~4 lumens) for a gentle glow.

• Miniature size: 28 mm bezel diameter, requires a ~14×20 mm cut-out, very shallow depth – fits into the tiniest spaces
• 1 high-efficiency LED (0.24 W) emits warm white light (2900–3200K) for a cozy ambiance and about 4 lumens of guiding light
• Narrow 30° beam – light is focused forward to illuminate a small area (e.g., a step or latch) without wide spillage
• Runs on 12V DC; housing made of white ABS plastic – UV-stable and corrosion-proof; rated IP54 (for interior/covered use)
• Easy to integrate: near-invisible installation – ideal for discreetly lighting stair edges, hallway floors, cockpit coamings, or decorative accents

A powerful, slim LED bar light (Osculati 13.192.20) for surface mount, delivering bright illumination in wet areas. With 10 high-efficiency LEDs (~450 lumens output) and IP66 protection, it’s perfect for booms, roll bars, engine rooms or deck canopies. Features a built-in switch for convenient on/off control and a special curved base that adapts to flat or rounded surfaces.

• High brightness: ~450 lm neutral white light (4000K) from 10 SMD-HD LEDs – excellently lights up cockpits, decks, or work areas
• Universal 12/24V input and low draw (~5.4 W at 12V) – intense illumination with minimal battery impact
• IP66 waterproof: fully protected against heavy spray and rain – suitable for outdoor installation exposed to elements
• Integrated push-button switch on the housing – allows local control (no need for a separate wired switch)
• Flexible mounting: curved rubber base lets the lamp fit on round tubes (boom, arch) as well as flat surfaces; mounting hardware and leads included (tinned wires for durable connection)

A compact waterproof LED light for flush mounting, perfect for subtle illumination of boat steps, decks, and interiors. Its ultra-low power draw and long-life LED provide reliable lighting without draining your battery.

• 38 mm diameter with low-profile design for easy recessed installation
• Durable waterproof housing (suitable for interior or exterior mounting)
• Consumes only 0.21 W at 12V – extremely low energy usage onboard
• Long-lasting LED (up to 50,000 hours) ensures years of maintenance-free operation
• Available in bright white or blue LED to suit your preference and ambiance

A compact oval LED fixture for surface mounting, ideal for interior cabin lighting or accent illumination on walls. It’s economical and reliable, featuring 5 bright LED chips and a waterproof design for safe use in marine environments.

• Measures 70 x 38 mm with an ultra-slim profile (10 mm) for easy wall or ceiling installation
• 5x LEDs provide bright yet gentle illumination with minimal power draw (0.43 W total)
• Waterproof build resists moisture and splashes – perfect for boat use
• Operates on 12V, integrating with your vessel’s electrical system while saving energy
• Equipped with white LED light (warm white hue) for comfortable, glare-free cabin lighting

A classic interior wall lamp for boats, crafted from brass for an elegant look and durability. Its powerful 10W LED provides warm white illumination ideal for reading and general cabin lighting, while the fixed mounting ensures it stays secure during voyages.

• Robust brass construction with corrosion-resistant finish – stylish and built for the marine environment
• Wide base diameter Ø91 mm and extended length 169 mm for broad, even lighting distribution
• 10W LED light source (12V) delivers bright warm-white light (great for reading or tasks)
• Fixed wall-mount installation – the lamp remains stable even in rough seas
• Perfect for cabins and salons, serving as a reading lamp above berths or chart tables

A stylish round LED light for cabin ceiling or wall, featuring a built-in switch for convenience. Made of chrome-plated brass, it offers both elegance and durability. The 6 LEDs emit a soft white glow with a wide 120° beam – perfect for lighting boat cabins, salons, or heads.

• Diameter Ø97.5 mm, low profile (36 mm depth) – mounts flush for a clean look
• Integrated on/off switch on the fixture for easy control at the light source
• 6 x 0.3W LEDs (~1.8W total) provide energy-efficient illumination (~60 lumens) with minimal heat
• Wide 120° light spread to cover a broad area evenly
• Chrome-plated brass body – corrosion-resistant and moisture-protected (built for marine use)

An ultra-compact LED fixture with a polished stainless steel face, designed for flush mounting in steps, floors, or walls. It supports both 12V and 24V systems, making it versatile for various onboard electrics. With 3 high-output LEDs (~2.25W total), it illuminates pathways and spaces subtly yet effectively – perfect as a courtesy light on stairs, cockpits, and interiors.

• Mini dimensions: 71 x 15 mm (approx. 10 mm depth) – nearly invisible with a sleek profile
• Shiny stainless steel bezel – stylish appearance and corrosion-proof durability
• 3 x 0.75W LED chips (~2.25W total) provide a bright focal glow with minimal power use
• Dual voltage 12V/24V compatibility – works on small boats and larger yachts alike
• Available in blue or white LED – choose soft blue for night visibility or bright white for clearer lighting

An ultra-compact LED light with only 20 mm diameter, designed to be recessed almost anywhere – from steps and floors to ceilings and cabinets. Despite its tiny size, this lamp is high-performance and bright thanks to its modern LED technology. It supports both 12V and 24V, making it suitable for all types of boats. Available in white or blue illumination for diverse uses – from deck lighting to interior decoration.

• Diameter Ø20 mm – extremely small, nearly invisible when off
• Low consumption (0.48W) with high light output – ideal for long continuous use
• Wide compatibility with 12V/24V systems, no converters needed
• Waterproof, robust build (stainless/ABS) – built to withstand harsh marine conditions
• Comes in blue LED for night lighting or warm white LED for cozy interior glow

A convenient portable work lamp for onboard repairs and emergency lighting. It runs on 12V and comes with a long 4.5m power cord, built-in on/off switch, and hanging hook. Perfect for illuminating the engine bay, deck work, or night fishing – durable plastic construction and bright 8W light ensure reliable performance.

• 12V work light (8W) provides strong illumination for maintenance and emergency tasks
• Long 4.5m flexible cable reaches far corners of the boat with ease
• Built-in hanging hook allows hands-free operation when working below deck
• On/off switch on the handle for easy control of the light
• Tough plastic body, impact-resistant – designed for marine service and workshop use

A large round LED dome light for ceiling or bulkhead mounting, equipped with 20 LEDs and a convenient built-in switch. It accepts both 12V and 24V, providing economical yet reliable illumination on your boat. The silver plastic housing is lightweight and durable, and the warm white glow (18 lumens) is perfect as night or background lighting in cabins, storage compartments, and below deck.

• Wide Ø140 mm diameter disperses light over a larger area
• 20x LED chips (~1.5W total) – ultra-low consumption and long lifespan (50,000 hrs)
• Compatible with 12V & 24V systems – easy integration on any vessel
• Built-in toggle switch on the light for quick on/off control
• Silver plastic casing, stylish and moisture-resistant – ideal for cabin ceilings and lockers