Electric and Manual Marine Toilets

Safety anti-siphon valve for marine toilet model 01430 that prevents unwanted siphoning and flooding. It introduces air to break any vacuum in the line, stopping water or waste from flowing back into the boat. A must-have component for a safe onboard toilet system.

• Anti-siphon vented loop valve – breaks vacuum and stops reverse water flow
• Protects against self-filling/flooding in toilets below waterline or connected to holding tanks
• Durable plastic body – non-corrosive and marine-grade construction
• Fits standard marine toilet hose sizes (intake/discharge) – easy to install in-line
• Enhances safety and hygiene – prevents waste water backflow and odors in the vessel

Replacement seal for marine toilet model 01430. Swap out your worn gasket to stop leaks and foul odors. This OEM-equivalent seal fits snugly between key components (pump, base, bowl), ensuring no water seeps through.

• Compatible seal gasket/O-ring for toilet 01430 – precise fit to the original specification
• Keeps a watertight junction between pump and base, or base and bowl of the toilet
• Prevents leakage of flush or waste water and blocks sewage odors from escaping
• Made of chemical-resistant, marine-grade rubber – long-lasting and non-deforming
• Easy to replace during maintenance – a small part that makes a big difference in toilet reliability

Replacement one-way waste valve for marine toilet 01430, ensuring waste flows out and not back in. This joker valve prevents flushed sewage from returning to the bowl after pumping, eliminating the chance of dirty water reappearing and foul odors. Installs in minutes – restores hygiene and proper toilet function.

• Original-style non-return (duckbill/joker) valve for toilet model 01430
• Seals the pump outlet tightly – stops waste water from flowing back into the bowl
• Made of flexible, durable rubber – conforms to create a reliable seal with each flush
• Eliminates bad odors caused by residue water sitting in the bowl
• Installs easily into the toilet base – direct replacement part with no modifications needed

Original full pump module for marine toilet model 01430. This spare pump assembly (complete with handle, housing, piston, and valves) swaps in directly for the old one, restoring your toilet to its factory performance. No more leaks, hard pumping, or weak flushing – your marine head will work like new again.

• Pump assembly specifically for toilet 01430 – 100% compatible with original mounting and plumbing
• Includes the entire manual pump: cylinder, piston, top valve cover, handle, and all necessary seals
• High-quality construction (OEM standard) – durable plastic body and stainless components
• Quick fix: remove the old unit and install the new one in minutes
• Restores full flushing power and reliability – extends the life of your marine toilet

Replacement base for manual marine toilet model 01430. This sturdy bottom piece replaces a cracked or worn toilet foundation that holds the bowl and pump. It re-establishes a secure deck mounting and leak-free hose connections, restoring the toilet’s original stability and watertight integrity.

• Compatible base (foundation) for toilet 01430 – identical footprint and bolt pattern to the original
• Includes mounting points for pump and bowl, plus integrated channels for intake and discharge water
• Tough plastic construction, resistant to stress and corrosion – built for long-term marine use
• Restores proper sealing to hoses – eliminates persistent leaks at the base connections
• Ensures secure attachment of the toilet to the floor/deck – no wobbling or sagging after installation

A replacement pump assembly kit for the manual marine toilet model 01430 that restores optimal pumping performance. It includes a durable pump cylinder and all necessary connection parts for a quick, reliable repair.

• Complete Cylinder Assembly: Contains the main pump cylinder and piston rod for the manual toilet.
• Robust Construction: Made of corrosion-resistant materials suitable for saltwater exposure and long-term use.
• Easy Installation: Designed for quick swap-in to replace the old pump assembly – no special tools required.
• Restores Performance: Fixes leaks, low pressure, or hard pumping issues, bringing your toilet back to like-new operation.

A replacement upper valve seal (flapper gasket) for the manual marine toilet model 01430, ensuring a reliable seal with every pump stroke. Replacing this gasket restores proper water flow and prevents any unwanted backflow into the bowl.

• Precision Rubber Flapper: A high-quality rubber gasket that tightly seals the toilet’s water inlet valve.
• No Backflow Leakage: Prevents reverse flow and loss of vacuum while pumping, ensuring the bowl fills fully with fresh flush water.
• Compatibility: Designed for EVAL/Jabsco manual toilets (code 01430), it fits models from 1998 through current versions perfectly.
• Quick Swap: Easy to install with minimal effort – a key spare part you should keep on hand, especially for long voyages.

The base seal, commonly known as the joker valve, is a critical one-way valve for the manual toilet 01430 that stops sewage backflow and foul odors. Replace this rubber valve at the first sign of wear to keep your marine toilet hygienic and reliable.

• One-Way Design: The joker valve lets waste water exit but then seals tight to prevent any backflow of water or odor into the bowl.
• Premium Material: Flexible, durable rubber construction that provides a leak-proof seal even after prolonged use and exposure to saltwater.
• Fit & Compatibility: Meant for Jabsco 01430 manual toilets – fits perfectly in the pump base of both 1998–2007 models and 2008+ models (version specific as required).
• Quick Replacement: Swapping out the old joker valve takes only a few minutes and greatly improves system performance – no more leaks or waste water coming back.

A comprehensive service repair kit for the manual marine toilet code 01430 (new generation post-2008), containing all the key components to refurbish the pump and valves. With this kit, your toilet will operate smoothly again, free of leaks and easy to pump – just like new.

• All-in-One Kit: Includes an anti-siphon vacuum breaker, piston rod with seals, joker valve, intake flapper valve, and all other gaskets needed for a complete overhaul.
• For 2008+ Models: Compatible with the updated version of manual toilets (Jabsco “Twist & Lock” model 29090-3000). Ensures exact fit and functionality for units made in 2008 and later.
• Restores Performance: Replacing all worn parts at once returns your toilet to factory condition – the pump strokes smoothly with no splashing or backflow.
• Cost-Effective Solution: Rather than purchasing a new toilet, this service kit offers an affordable way to extend the life of your existing one, saving you money.

A complete spare part kit for the older generation manual marine toilet 01430 (manufactured 1998–2007). This kit allows you to renew your older toilet by replacing all the important seals and valves, restoring reliable operation with no leaks and no strain while pumping.

• All Necessary Parts: Includes a set of O-rings, upper and lower valve gaskets, piston seals, bolts, and small components tailored to the pre-2008 design.
• Compatibility: Made specifically for Jabsco manual toilets (kit ref: 29045-2000) – ensures exact fit for 01430 models from 1998 through 2007.
• Restores Functionality: By swapping out worn parts, you eliminate persistent issues like hard pumping, water seepage, or loss of prime. Your toilet will operate smoothly again.
• Easy Installation: Each piece in the kit is intended to directly replace the original – a detailed diagram/list is provided to simplify the installation process even for DIY boaters.